GOST R 52752-2007
ГОСТ Р 52752-2007
|
|
Formworks. Test methods
Опалубка. Методы испытаний
Status: Effective - Introduced for the first time
The standard applies to small and coarse formwork and their elements intended for the construction of monolithic reinforced concrete and concrete structures of buildings and structures, and establishes methods for statistical testing of loading formwork elements in terms of bearing capacity and stiffness, as well as methods for testing formwork elements and reinforced concrete erected in the formwork and concrete structures of buildings and structures in terms of accuracy of geometrical parameters established by GOST R 52085. The standard also extends on tests conducted by formwork manufacturers, testing laboratories and certification bodies, as well as organizations developing formwork.
Стандарт распространяется на мелко- и крупнощитовую опалубки и их элементы, предназначенные для возведения монолитных железобетонных и бетонных конструкций зданий и сооружений, и устанавливает методы статистических испытаний нагружением элементов опалубок по показателям несущей способности и жесткости, а также методы испытаний элементов опалубки и возводимых в опалубке железобетонных и бетонных конструкций зданий и сооружений по показателям точности геометрических параметров, установленных ГОСТ Р 52085. Стандарт также распространяется на испытания, проводимые предприятиями - изготовителями опалубки, испытательными лабораториями и органами сертификации, а также организациями, разрабатывающими опалубку.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
9/24/2007
SKU: RUSS62995
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
5. Regulatory documents for building structures and products »
K.54 Wooden structures »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.13 Testing and control of products of engineering industry »
4.13.2 Machines and equipment for special purposes »
4.13.2.7 Machines and equipment for construction industry »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.220 Construction equipment »
National standards »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.220 Construction equipment »
National Standards for KGS (State Standards Classification) »
Latest edition »
Zh Construction and building materials »
Zh3 Building structures and parts »
Zh33 Stone, brick, concrete and reinforced concrete structures and parts »
The Document References:
Federal Law 184-FZ: About technical regulation
GOST 10197-70: Stands and supports for measuring heads. Specifications
GOST 10528-90: Geodetic levels
GOST 10529-96: General specifications
GOST 13837-79: General purpose dynamometers
GOST 16483.0-89: Wood. General requirements to physical and mechanical tests
GOST 16483.10-73: Wood. Methods for determination of ultimate strength in compression parallel the grain
GOST 16483.11-72: Wood. Method for determination of conventional ultimate strength in compression perpendicular to grain
GOST 16483.14-72: Wood. Methods for swelling testing
GOST 16483.20-72: Wood determination method of water absorption
GOST 16483.28-73: Wood. Method for determination of ultimate tensile strength across the grain
GOST 16483.35-88: Wood. Method for determination of swelling
GOST 16483.37-88: Wood. Method for determination shrinkage
GOST 16483.3-84: Wood. Method of static bending strength determination
GOST 16483.5-73: Wood. Methods for determination of ultimate shearing strength parallel to grain
GOST 16483.7-71: Wood. Methods for determination of moisture content
GOST 16588-91: Sawn products and wooden details. Methods for determining moisture content
GOST 166-89: Vernier callipers. Specifications
GOST 17580-82: Wooden laminated structures. Method to determinate stability of glued joints against cyclic temperature- and humidity influences
GOST 18068-72: Laminated glued wood. Method of determining linear dimension changes in accordance with relative humidity
GOST 21523.4-77: Modified wood. Method for determination of moisture content
GOST 21523.6-77: Modified wood. Method for determination of moisture absorption
GOST 21554.2-81: Sawn timber and blanks. Method for determination of ultimate strength in static bending
GOST 21554.5-78: Sawn timber and semi-manufactures. Method for determining the ultimate strength in tension parallel to grain
GOST 25579-83: Modified wood. Method for determination of dimensions stability
GOST 26433.0-85: System of ensuring geometrical parameters accuracy in construction. Rules of measurement. General
GOST 26433.1-89: System of ensuring geometrical parameters accuracy in construction. Rules of measurement. Prefabricated elements
GOST 26433.2-94: System of ensuring geometric parameters accuracy in building. Rules for measuring parameters of buildings and works
GOST 27014-86: Wood protective. Method for determining wood permeability
GOST 27475-87: Water-proof and antiseptic water-proof compounds for protection of timber butt-ends. Method of water-proof properties determination
GOST 577-68: Clock-type dial indicators graduated in unit divisions of 0,01 mm. Specifications
GOST 8.207-76: Direct measurements with multiple observations. Observation data processing methods
GOST 8829-94: Reinforced concrete and prefabricated concrete building products. Loading test methods. Assesment of strength, rigidity and crack resistance
GOST 9622-87: Laminated glued wood. Methods for determination of ultimate strength and modulus of elasticity in tension
GOST 9623-87: Laminated glued wood. Method for determination of ultimate strength and modulus of elasticity in compression
GOST R 1.0-2004: Standardization in the Russian Federation. Basic provisions
GOST R 52085-2003: Formworks. General specifications
GOST R 52086-2003: Formworks. Terms and definitions
PR 50.2.006-94: Procedure for calibration of measurement equipment
The Document is Referenced By:
GOST 34329-2017: Formworks. General specifications
SP 435.1325800.2018: Monolithic concrete and reinforced concrete structures. Rules for the production and acceptance of work
SP 70.13330.2012: Bearing and enclosing structures. Updated living edition of SNiP 3.03.01-87
|
Customers Who Viewed This Item Also Viewed:
 |
Dependability in technics. Dependability management. Analysis techniques for reliability. General principles
Language: English |
Tobacco and tobacco product. Determination of phosphor organic pesticides. Thin layer chromatographic method
Language: English |
Tobacco and tobacco product. Determination of chloro-organic pesticides. Thin layer chromatographic method
Language: English |
Oil. General specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
