GOST R 54359-2011
ГОСТ Р 54359-2011
|
|
Dry cement base adhesives, base coats and patching putties for facade’s thermo insulation composite systems with external mortar’s lays. Specifications
Cоставы клеевые, базовые штукатурные, выравнивающие шпаклевочные на цементном вяжущем для фасадных теплоизоляционных композиционных систем с наружными штукатурными слоями. Технические условия
Status: Not effective - Superseded. Registration information 1809-st dated 11/23/2017 (official website of Rosstandart); IUS 3-2018
This standard applies to adhesive, basic plastering and leveling putty compounds based on aqueous polymer dispersions, produced industrially, mixed immediately before use with cement (portland cement, white cement), intended for the device of adhesive and reinforced base plastering and leveling putty layers in the composition of the facade thermal insulation composite systems with external plaster layers used in the construction, renovation and repair of buildings Nij and structures. This standard establishes the technical requirements for the factory (supplied by the manufacturer), mortar (obtained after mixing with cement) and hardened compositions
Настоящий стандарт распространяется на клеевые, базовые штукатурные и вырав-нивающие шпаклевочные составы, выпускаемые промышленным способом в виде сухих строительных смесей, содержащие полимерные добавки не более 5,0 % (в сухом состоянии) массы смеси, изготавливаемые на портландцементе, белом цементе, на смешанных (сложных) минеральных вяжущих на основе портландцемента или белого цемента, предназначенные для устройства клеевого, армированного базового штукатурного и выравнивающего слоев в составе фасадных теплоизоляционных композиционных систем с наружными штукатурными слоями, применяемые при строительстве, реконструкции и ремонте зданий и соружений. Настоящий стандарт устанавливает технические требования к составам в сухом состоянии, растворным составам и затвердевшим составам
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
7/20/2011
SKU: RUSS63115
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
6. Regulatory documents for building materials and products »
k.62 Concretes and mortars »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.120 Protection of buildings, inside and out »
91.120.01 Protection of buildings inside and outside as a whole »
National standards »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.120 Protection of buildings, inside and out »
91.120.01 Protection of buildings inside and outside as a whole »
National Standards for KGS (State Standards Classification) »
Latest edition »
Zh Construction and building materials »
Zh3 Building structures and parts »
Zh35 Constructions and parts from other materials »
The Document is Replaced With:
GOST R 54359-2017: Dry cement base decorative coats for faзade’s thermo insulation composite systems with external plaster lays. Specifications
The Document References:
Federal Law 184-FZ: About technical regulation
GOST 10178-85: Portland cement and portland blastfurnace slag cement. Specifications
GOST 10733-98: Mechanical hand and pocket watches. General specifications
GOST 10832-2009: Perlite expanded sand and crushed stone. Specifications
GOST 14192-96: Cargo marking
GOST 15588-86: Polystyrene foam boards. Specifications
GOST 22551-77: Quartz sand, ground sandstone, quartzite and vinyl quartz for glass industry. Specifications
GOST 22856-89: Decorative crushed natural stone and sand. Specifications
GOST 24544-81: Concretes. Methods for determining shrinkage and creep deformations
GOST 25898-83: Building materials and products. Methods of steam-tightness determination
GOST 30108-94: Building materials and elements. Determination of specific activity of natural radioactive nuclei
GOST 30459-2008: Admixtures for concretes and mortars. Determination and estimate of the efficiency
GOST 310.4-81: Cements. Methods of tests of bending and compression strengths
GOST 31108-2003: General structural Portland clinker cements. Specifications
GOST 31356-2007: Dry building cement binder mixes. Test methods
GOST 4.233-86: Product-quality index system. Building. Mortars. Index nomenclature
GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications
GOST 5802-86: Mortars. Test methods.
GOST 8.579-2002: State system for ensuring the uniformity of measurements. Requirements established for the quantity of prepackaged goods in packages of any kind during their manufacturing, packaging, selling or importing
GOST 8735-88: Sand for construction work. Testing methods
GOST 8736-93: Sand for construction works. Specifications
GOST 965-89: Portland cements, white. Specification
GOST R 1.0-2004: Standardization in the Russian Federation. Basic provisions
GOST R 53785-2010: Facade’s thermo insulation composite systems with external mortar’s lays. Classification
GOST R 53786-2010: Facade’s thermo insulation composite systems with external mortar’s lays. Terms and definitions
GOST R EN 1607-2008: Thermal insulating products for building applications. Method for determination of tensile strength perpendicular to faces
The Document is Referenced By:
GOST R 56707-2015: Facade’s thermo insulation composite systems with external mortar layers. General specifications
GOST R 58171-2018: Services in railway transport. Requirements for passenger service at railway stations
SP 293.1325800.2017: Facade's thermo insulation composite systems with external mortar layers. Design and work execution rules
|
Customers Who Viewed This Item Also Viewed:
 |
Industrial process measurement and control equipment. Reliability. General requirements and test methods
Language: English |
Gauged corrosion-resistant, heat-resistant and high-temperature steel shape
Language: English |
System for ensuring the reliability and safety of construction sites. Loads and impacts. design standards
Language: English |
Heating, ventilation and air conditioning. Fire Safety Requirements
Language: English |
Reliability of atomic power stations and their equipment. General statements and reliability index nomenclature
Language: English |
Electromagnetic compatibility of technical equipment. Technical equipment for nuclear power plants. Requirement and test methods
Language: English |
Billets made of corrosion-resistant steels of 12Х18Н9Т, 12Х18Н10Т, 08Х18Н10Т, 10Х17Н13М2Т, 12Х18Н12Т and 03Х21Н32М3Б types.
Language: English |
Dependability in technics. Terms and definitions
Language: English |
System of products development and launching into manufacture. Technical assignment. Requirements to contents and form of presentation
Language: English |
Reliability in technology. Composition and general rules for setting reliability requirements
Language: English |
Rails of types P38 and P42. Technical conditions
Language: English |
Stainless corrosion resisting, heat-resisting and creep resisting steel and alloy on iron-nickel-based products. Specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
