GOST R 54850-2011
ГОСТ Р 54850-2011
|
|
Roof windows and skylights. Method for determination of reduced of thermal resistance
Окна мансардные и зенитные фонари. Метод определения сопротивления теплопередаче
Status: Effective - Introduced for the first time. IUS 5-2012
This standard applies to outdoor translucent structures of residential, public, industrial and agricultural buildings - skylights according to GOST 30734, zenith lamps, for example, GOST 22160, protruding behind (above) the outer surface of opaque outer fences (walls, coatings), which transmits located parallel or at an angle to the surface of the outer opaque fences, and establishes a method for determining their heat transfer resistance and heat transfer coefficient in a climate Coy chamber calorimetry (addl hot chamber). The heat-shielding characteristics of fillings of openings installed within the thickness of external fences (window and door blocks) are determined in accordance with the requirements of GOST 26602.1
Настоящий стандарт распространяется на наружные светопрозрачные конструкции жилых, общественных, производственных и сельскохозяйственных зданий - мансардные окна по ГОСТ 30734, зенитные фонари, например, по ГОСТ 22160, выступающие за (над) наружной поверхностью непрозрачных наружных ограждений (стен, покрытий), светопропускающее заполнение которых расположено параллельно или под углом к поверхности наружных непрозрачных ограждений, и устанавливает метод определения их сопротивления теплопередаче и коэффициента теплопередачи в климатической камере с помощью калориметра (приставной горячей камеры). Теплозащитные характеристики заполнений проемов, устанавливаемых в пределах толщины наружных ограждений (оконных и дверных блоков), определяются в соответствии с требованиями ГОСТ 26602.1
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
12/15/2011
SKU: RUSS63143
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
5. Regulatory documents for building structures and products »
k.56 Windows, doors, gates and their appliances »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
2 Tests for external factors »
2.3 Testing of products in construction »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.060 Construction elements »
91.060.50 Doors and windows »
National standards »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.060 Construction elements »
91.060.50 Doors and windows »
National Standards for KGS (State Standards Classification) »
Latest edition »
Zh Construction and building materials »
Zh3 Building structures and parts »
Zh39 Test methods. Packaging. Marking »
The Document References:
Federal Law 184-FZ: About technical regulation
Federal Law 261-FZ: On energy conservation and on improving energy efficiency and on amendments to certain legislative acts of the Russian Federation
GOST 111-2001: Flat glass. Specifications
GOST 112-78: Meteorological glass thermometers
GOST 12.1.013-78: Occupational safety standards system. Construction. Electrical safety. General requirements
GOST 15588-86: Polystyrene foam boards. Specifications
GOST 1790-77: Wire made of chrome, aluminum, copper and constantan alloys for thermo electrodes of thermo-electric converters
GOST 22160-76: Two layer domes of organic plastic. Specifications
GOST 24866-99: Sealed insulating glass units. Specifications
GOST 26254-84: Buildings and structures. Methods of determination of thermal resistance of enclosing structures
GOST 26602.1-99: Windows and doors. Methods of determination of resistance of thermal transmission
GOST 27382-87: Rotary switches. General specification
GOST 27570.0-87: Safety of household appliances and similar devices
GOST 30733-2000: Hard coat low emissivity glass. Specifications
GOST 30734-2000: Roof wooden window blocks. Specifications
GOST 31166-2003: Building and structure envelopes. Method for calorimetric determination of the heat transfer coefficient
GOST 6616-94: Thermoelectric converters. General specifications
GOST 6651-2009: State system for ensuring the uniformity of measurements. Platinum, copper, and nickel resistance resistive temperature transducers. General requirements and test methods
GOST 6651-94: Thermal converters of resistance. General technical requirements and test methods
GOST 7076-99: Building materials and products. Method of determination of steady-state thermal conductivity and thermal resistance
GOST 8711-93: Direct acting indicating analogue electrical measuring instruments and their accessories. Part 2. Special requirements for ammeters and voltmeters
GOST 9736-91: Electric apparatus of direct transformation for measuring non -electric values. General technical requirements and test methods
GOST R 1.0-2004: Standardization in the Russian Federation. Basic provisions
GOST R 50431-92: Termocouplers. Part 1. Nominal static graduation tables
GOST R 51380-99: Energy conservation. Methods of assurance for energy efficiency indicators of energy consumed products to its normative values. General requirements
GOST R 51387-99: Energy conservation. Norm-method securing. Basic concept
MDS 31-8.2002: Recommended Practice for the Design and Installation of Skylights for Natural Illumination of Rooms
SNiP 12-03-99: Occupational safety in construction part one. General safety requirements
SNiP 23-02-2003: Buildings Heat Insulation
The Document is Referenced By:
GOST R 58756-2019: Polymer multilayer domes. Technical specifications
GOST R 70723-2023: Window and door units. Calorimetric method for determining the heat transfer coefficient
|
Customers Who Viewed This Item Also Viewed:
 |
Limit dimension deviation from 0,1 to 10000 mm and surface shape and arrangement allowances, not specified on drawings.
Language: English |
Rules of development, coordination, approval and composition of technical and economic assessment for construction
Language: English |
Mineral fertilizers. Method for determination of dynamic strength and attrition
Language: English |
Diesel fuel EURO. Specifications
Language: English |
Inch thread with a profile angle of 55 degrees
Language: English |
Vessels and apparatus. Norms and methods of strength calculation. General requirements
Language: English |
Norms of structural design of nuclear power plants with reactors of different types
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
