imgalt

GOST R 55818-2013

ГОСТ Р 55818-2013

Polymer base decorative coats for facade’s thermal insulation composite systems with external mortar's lays. Specifications

Составы декоративные штукатурные на полимерной основе для фасадных теплоизоляционных композиционных систем с наружными штукатурными слоями. Технические условия

Status: Not effective - Superseded. Registration information 137-st dated 03/20/2018 (official site of Rosstandart); IUS 5-2018

This standard applies to decorative plaster compositions (hereinafter - decorative compositions), produced industrially in the form of ready-to-use mass-painted compositions based on aqueous polymer dispersions and natural mineral fillers, intended for the installation of a decorative protective finishing layer as part of facade insulation systems with external plaster layers used in the construction, reconstruction and repair of buildings and structures. This standard establishes technical requirements for the factory (supplied by the manufacturer) and hardened decorative compositions.

Настоящий стандарт распространяется на декоративные штукатурные составы (далее - декоративные составы), выпускаемые промышленным способом в виде готовых к применению окрашенных в массе составов на основе водных полимерных дисперсий и природных минеральных наполнителей, предназначенные для устройства декоративно-защитного финишного слоя в составе фасадных теплоизоляционных композиционных систем с наружными штукатурными слоями, применяемые при строительстве, реконструкции и ремонте зданий и сооружений. Настоящий стандарт устанавливает технические требования к заводским (поставляемым предприятием-изготовителем) и затвердевшим декоративным составам

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Federal Agency for Technical Regulation and Metrology, 11/22/2013

SKU: RUSS63176

Price: $267.00



imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Regulations » Documents System of normative documents in construction » 6. Regulatory documents for building materials and products » k.62 Concretes and mortars »

ISO classifier » 91 CONSTRUCTION MATERIALS AND CONSTRUCTION » 91.100 Building Materials » 91.100.99 Other building materials »

National standards » 91 CONSTRUCTION MATERIALS AND CONSTRUCTION » 91.100 Building Materials » 91.100.99 Other building materials »

National Standards for KGS (State Standards Classification) » Latest edition » Zh Construction and building materials » Zh1 Construction materials » Zh16 Finishing and facing materials »


The Document is Replaced With:

GOST R 55818-2018: Polymer base decorative coats for faсade’s thermo-insulation composite systems with external mortar’s lays. Specifications

The Document References:

GOST 10354-82: Polyethylene film Specifications

GOST 10733-98: Mechanical hand and pocket watches. General specifications

GOST 14192-96: Cargo marking

GOST 17537-72: Paint materials. Methods for the determination of the content of volatile and non-volatile matters, hard and film-forming materials

GOST 19007-73: Paintwork materials. Method for determination of drying time and degree

GOST 21903-76: Paint materials. Methods of relative light-fastness determination

GOST 25898-2012: Building materials and products. Methods for determination of water vapour permeability and of steam-tightness

GOST 26633-2012: Heavy-weight and sand concretes. Specifications

GOST 30108-94: Building materials and elements. Determination of specific activity of natural radioactive nuclei

GOST 30244-94: Building materials. Methods for combustibility test

GOST 30353-95: Floors. Impact resistance test method

GOST 31356-2007: Dry building cement binder mixes. Test methods

GOST 3826-82: Wire cloth nets with square mesh. Specifications

GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications

GOST 5802-86: Mortars. Test methods.

GOST 8.579-2002: State system for ensuring the uniformity of measurements. Requirements established for the quantity of prepackaged goods in packages of any kind during their manufacturing, packaging, selling or importing

GOST R 52020-2003: Water dispersible paint materials. General specifications

GOST R 53228-2008: Non-automatic weighing instruments. Part 1. Metrological and technical requirements. Tests

GOST R 53786-2010: Facade’s thermo insulation composite systems with external mortar’s lays. Terms and definitions

OK 005-93: All-Russia Classification of Products (Part 1)

OK 005-93: All-Russia Product Classification (OKP) (Part 13)

OK 005-93: All-Russia Classification of Products (OKP)

OK 005-93: All-Russia Classification of Products (Part 17)

OK 005-93: All-Russia Product Classification (OKP) (Part 3)

OK 005-93: All-Russia Classification of Products (OKP) (Part 4)

OK 005-93: All-Russia Classification of Products (Part 5)

OK 005-93: All-Russia Classification of Products (Part 6)

OK 005-93: All-Russia Product Classification (OKP) (Part 7)

OK 005-93: All-Russia Classification of Products (OKP) (Part 8)

OK 005-93: All-Russia Classification of Products (part 9)

OK 005-93: All-Russia Classification of Products (OKP) (Part 10)

OK 005-93: All-Russia Classification of Products (Part 11)

OK 005-93: All-Russia Classification of Products (part 12)

OK 005-93: All-Russia Classification of Products (OKP) (Part 14)

OK 005-93: All-Russia Classification of Products (part 15)

OK 005-93: All-Russia Classification of Products (Part 16)

OK 005-93: All-Russia Classification of Products (Part 17)

OK 005-93: All-Russia Classification of Products (Part 18)

OK 005-93: All-Russia Classification of Products (Part 19)

OK 005-93: All-Russia Classification of Products (Part 18)

OK 005-93: All-Russia Classification of Products (Part 21)

OK 005-93: All-Russia Classification of Products (OKP) (Part 22)

SanPiN 2.1.7.1322-03: Hygienic requirements regarding dumping and decontamination of industrial and consumable waste

The Document is Referenced By:

GOST R 56707-2015: Facade’s thermo insulation composite systems with external mortar layers. General specifications

SP 293.1325800.2017: Facade's thermo insulation composite systems with external mortar layers. Design and work execution rules

SP 71.13330.2017: Insulation and finish coatings

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Building materials. Methods for combustibility test
Language: English
Price: $162.00
imgalt
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English
Price: $745.00
imgalt
Building materials spread flame test method
Language: English
Price: $147.00
imgalt
Clear sheet glass. Specifications
Language: English
Price: $250.00
imgalt
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English
Price: $349.00
imgalt
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $549.00
imgalt
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English
Price: $414.00
imgalt
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English
Price: $700.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!