GOST 21780-83
ГОСТ 21780-83
|
|
System of ensuring the accuracy of geometrical parameters in construction. Accuracy calculation
Система обеспечения точности геометрических параметров в строительстве. Расчет точности
Status: Not effective - Superseded
The standard applies to the design of buildings, structures and their elements and establishes general provisions, methodological principles and the procedure for calculating the accuracy of geometric parameters in construction. On the basis of this standard, methodological documents are developed that establish the features of calculations of the accuracy of the geometric parameters of structures of various types.
Стандарт распространяется на проектирование зданий, сооружений и их элементов и устанавливает общие положения, методические принципы ипорядок расчета точности геометрических параметров в строительстве. На основе настоящего стандарта разрабатываются методические документы, устанавливающие особенности расчетов точности геометрических параметров конструкций различных видов.
Choose Language:
Format: Electronic (pdf/doc)
Approved: State Committee of the Council of Ministers of the USSR for Construction,
12/13/1983
SKU: RUSS63362
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
2. General technical regulatory documents »
k.24 Dimensional interchangeability and compatibility »
ISO classifier »
01 GENERAL PROVISIONS. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION »
01.100 Technical drawings »
01.100.30 Construction drawings »
National standards »
01 GENERAL PROVISIONS. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION »
01.100 Technical drawings »
01.100.30 Construction drawings »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.010 Construction industry »
91.010.30 Technical aspects »
National standards »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.010 Construction industry »
91.010.30 Technical Aspects »
National Standards for KGS (State Standards Classification) »
Latest edition »
Zh Construction and building materials »
Zh0 General rules and regulations for construction and building materials »
Zh02 Design and calculation norms »
National Standards for OKSTU »
BUILDINGS AND INSTALLATIONS »
General rules and regulations »
The Document is Replaced With:
GOST 21780-2006: System of ensuring the accuracy of geometrical parameters in construction. Accuracy calculation
As a Replacement Of:
GOST 21780-76: System for ensuring geometric accuracy in construction. General rules for calculating accuracy
The Document References:
GOST 21778-81: System of ensuring of geometrical parameters accuracy in construction. Main principles
GOST 21779-82: System of ensuring of geometrical parameters accuracy in construction. Manufacturing and assembling tolerances
GOST 23615-79: System of ensuring accuracy of geometrical parameters in construction. Statistical analysis of accuracy
GOST 23616-79: System of ensuring of geometrical accuracy of parameters in construction. Control of accuracy
The Document is Referenced By:
GOST 11024-84: Concrete and reinforced concrete panels for external walls of residential and civil buildings. General specifications
GOST 12504-80: Concrete and reinforced concrete panels for internal walls of residential and civil buildings. General specifications
GOST 12767-94: Reinforced concrete solid slabs for floors in lange-panel buildings. General specifications
GOST 17079-88: Reinforced concrete blocks for ventilation. Specifications
GOST 17538-82: Reinforced concrete constructions and products for lift shafts of residential buildings. Specifications
GOST 21.501-93: System of design documents for construction. Rules for execution of architectural and construction working drawings
GOST 21778-81: System of ensuring of geometrical parameters accuracy in construction. Main principles
GOST 21780-2006: System of ensuring the accuracy of geometrical parameters in construction. Accuracy calculation
GOST 23118-78: Structural metalwork. General specifications
GOST 23118-99: Steel construction structures
General Technical Specifications
GOST 23616-79: System of ensuring of geometrical accuracy of parameters in construction. Control of accuracy
GOST 26607-85: System of ensuring of geometrical parameters accuracy in construction. Functional tolerances
GOST 28984-91: Modular size coordination in building engineering. Basic rules
GOST 31173-2003: Steel doors. Specifications
GOST 31174-2003: Gates of metall. General specifications
GOST 31310-2005: Wall three-layer reinforced concrete panels with energy-efficient insulation. General specifications
GOST 6482-88: Reinforced concrete non-pressure pipes
GOST R 21.1501-92: System of design documents for construction. Rules for execution of architectural and construction working drawings
MDS 11-19.2009: Interim recommendations for organization of technology geodetic quality construction of multifunctional high-rise buildings
MDS 12-1.98: Recommended Practice for Development of Quality Systems in Construction and Installation Organizations (Based on ISO 9000 Standards)
MDS 12-22.2005: Recommendations for the application in the construction industry of the requirements of regulatory legal and other regulatory acts containing state regulatory labor protection requirements
MDS 12-23.2006: Temporary recommendations on the technology and organization of construction of multifunctional high-rise buildings and building complexes in Moscow
MR 21.02-95: Recommended Practice for Procedure for Designating Accuracy Characteristics in Construction Drawings
R 391-80: Guidelines for the metrological assurance of the construction of underwater crossings of main pipelines
RSN 58-86: Guidelines for design of panel exterior walls of residential buildings for the north building and climatic zone
SNiP 3.03.01-87: Bearing and enclosing structures
SNiP III-16-80: Prefabricated concrete and reinforced concrete structures
SP 16.13330.2011: Steel structures
SP 53-102-2004: General rules for steel structure design
|
Customers Who Viewed This Item Also Viewed:
 |
Square steel tubes. Range
Language: English |
Design norms for antiseismic atomic power stations
Language: English |
Federal norms and rules in the field of the use of atomic energy. Valves for nuclear power plants. General technical requirements
Language: English |
Dependability in technics. Dependability management. Analysis techniques for reliability. General principles
Language: English |
Electric locomotives. General technical requirements
Language: English |
Pipeline valves. Leakage rates of valves
Language: English |
Federal Standards and Rules in the Field of Atomic Energy Use
Language: English |
Locomotive and motor rolling stock. Requirements of fire safety
Language: English |
Railway rolling stock. Methods for monitoring the performance of fire alarm and fire extinguishing systems
Language: English |
Oil. General specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
