imgalt

GOST 20889-88

ГОСТ 20889-88

Pulleys for driving V-belts with normal sections. General specifications

Шкивы для приводных клиновых ремней нормальных сечений. Общие технические условия

Status: Effective - Supersedes. IUS 6-1988 The limitation of effectiveness period has been lifted: Protocol No. 3-93 of the IGU dated 03/12/93 (IUS 5-6-1993)

The standard applies to single-stage pulleys for drive belts in accordance with GOST 1284.1-80.

Стандарт распространяется на одноступенчатые шкивы для приводных ремней по ГОСТ 1284.1-80.

Choose Language: 
Format: Electronic (pdf/doc)

Approved: USSR State Committee for Standards, 3/28/1988

SKU: RUSS63373

Price: $300.00



imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 21 Mechanical systems and general purpose devices »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.13 Testing and control of products of engineering industry » 4.13.1 Machinery, equipment and components for general engineering applications » 4.13.1.1 Components and assembly units for general engineering applications »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.10 Testing and monitoring products of rubber and plastics industry » 4.10.1 Rubber products »

ISO classifier » 21 MECHANICAL SYSTEMS AND GENERAL PURPOSE DEVICES » 21.220 Flexible drives and transmissions » 21.220.10 Belt drives and their components »

National standards » 21 MECHANICAL SYSTEMS AND GENERAL PURPOSE DEVICES » 21.220 Flexible drives and transmissions » 21.220.10 Belt drives and their components »

National Standards for KGS (State Standards Classification) » Latest edition » G Machines, equipment and tools » G1 General parts and units of machines » G15 Toothed and friction transmission. Drives and Transmissions »

National Standards for OKSTU » PRODUCTS FOR GENERAL ENGINEERING APPLICATIONS » Pulleys for flat and V-belt drives »


As a Replacement Of:

GOST 20889-80: Drive V-belts solid pulleys with one-sided output hub. Basic dimensions

GOST 20890-80: One side recessed solid pulleys for drive V-belts. Basic dimensions

GOST 20891-80: One side recessed solid pulleys for drive V-belts and with output hub. Basic dimensions

GOST 20892-80: Pulleys for drive V-belts with disc and hub outstanding from one end of the rim. Basic dimensions

GOST 20893-80: Pulleys for drive V-belts with disc and hub outstanding from one end of the rim. Basic dimensions

GOST 20894-80: Pulleys for drive V-belts with disc and hub outstanding from one end and shortened from other end of the rim. Basic dimensions

GOST 20895-80: Pulleys for drive V-belts with spokes and hub outstanding from one end of the rim. Basic dimensions

GOST 20896-80: Pulleys for drive V-belts with spokes and hub, shortened from one end of the rim. Basic dimensions

GOST 20897-80: Pulleys for drive V-belts with spokes and hub outstanding from one end and shortened from other end of the rim. Basic dimensions

GOST 20898-80: Pulleys for drive V-belts. General specifications

The Document References:

GOST 12.4.026-76: Signal colors and safety signs

GOST 12082-82: Roof boarding for consignments up to 500 kg. General specifications

GOST 1284.1-80: Driving v-belts of standard cross-sections driving v-belts of standard cross-sections. Basic dimensions. Control methods

GOST 14192-77: Marking of cargoes

GOST 19200-80: Iron and steel castings. Terms and definitions of defects

GOST 24643-81: Basic norms of interchangeability. Tolerances of form and position of surfaces. Numerical values

GOST 25069-81: Basic norms of interchangeability. Unindicted tolerances of form and surface location

GOST 25347-82: Basic norms of interchangeability. Unified system of tolerances and fits. Tolerance zones and recommendable fits

GOST 25348-82: Basic norms of interchangeability. Unified system of tolerances and fits. Series of tolerances, basic deviations and tolerance zones for sizes over 3150 mm

GOST 26645-85: Metal and alloy castings. Dimensions and mass tolerances and machining allowances.

GOST 2789-73: Surface roughness. Parameters and characteristics

GOST 2991-85: Wooden uncollapsible cases for weights up to 500 kg. General specifications

GOST 8908-81: Basic norms of interchangeability. Standard angles and angle tolerances

GOST 9.014-78: Unified system of corrosion and ageing protection. Temporary corrosion protection of products. General requirements

GOST 9.032-74: Unified, system of corrosion and ageing protection. Paint coatings. Groups, technical requirements and designations

GOST 9378-75: Surface roughness comparison specimens. Technical requirements

The Document is Referenced By:

GOST 1284.2-89: Driving v-belts of standard cross-sections driving v-belts of standard cross-sections

GOST 1284.3-96: V-belts of standard cross-sections. Transmitted powers

GOST 31832-2012: Well sucker rod pump drives. General technical requirements

GOST R 50641-94: Grooved pulleys for classical and narrow V-belts. System based on datum width

GOST R 51763-2001: Well sucker rod pump drives. General technical requirements

RM 38.14.008-94: Guiding Material. Radial (centrifugal) and axial fans. Maintenance and repair.

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Construction in seismic regions
Language: English
Price: $553.00
imgalt
2015 Kazakhstan PUE RK Rules for Arrangement of Electrical Installations. ALL SECTIONS.
Language: English
Price: $1,851.79
imgalt
Software for measuring instruments. Procedure for of certification. General provisions
Language: English
Price: $356.86
imgalt
Tobacco and tobacco product. Determination of phosphor organic pesticides. Thin layer chromatographic method
Language: English
Price: $105.00
imgalt
Tobacco and tobacco product. Determination of chloro-organic pesticides. Thin layer chromatographic method
Language: English
Price: $118.05
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!