GOST 12.3.016-87
ГОСТ 12.3.016-87
|
|
Occupational safety standards system. Building construction anticorrosive protective works. Safety requirements
Система стандартов безопасности труда. Строительство. Работы антикоррозионные. Требования безопасности
Status: Effective
The standard applies to anticorrosion works on the protection of equipment, building structures of buildings and structures at enterprises under construction, operating and reconstructed, in terms of bases, workshops and on-site production facilities at all stages of the process (surface preparation, preparation of materials and preparation of compounds, application of an anticorrosion coating, storage and transportation of raw materials).
Cтандарт распространяется на антикоррозионные работы по защите оборудования, строительныхконструкций зданий и сооружений на строящихся, действующих и реконструируемых предприятиях, в условиях баз, мастерских и приобъектных производственных помещений на всех стадиях технологического процесса (подготовки поверхности, подготовки материалов и приготовления составов, нанесения антикоррозионного покрытия, хранения и транспортирования исходных материалов).
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstroy of the USSR (State Committee of the Council of Ministers of the USSR for Construction),
1/27/1987
SKU: RUSS63437
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
1. Organizational and methodological regulatory documents »
k.12 Production »
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
III Occupational safety requirements for production equipment and processes »
2 Safety requirements for certain types of work »
2.17 Safety requirements for repair work »
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
III Occupational safety requirements for production equipment and processes »
2 Safety requirements for certain types of work »
2.15 Safety requirements for working with highly toxic substances »
ISO classifier »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.100 Safety of professional activity. Industrial hygiene »
National standards »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.100 Safety of professional activity. Industrial hygiene »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.120 Protection of buildings, inside and out »
National standards »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.120 Protection of buildings, inside and out »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.120 Protection of buildings, inside and out »
91.120.01 Protection of buildings inside and outside as a whole »
National standards »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.120 Protection of buildings, inside and out »
91.120.01 Protection of buildings inside and outside as a whole »
National Standards for KGS (State Standards Classification) »
Latest edition »
T General technical and organizational and methodological standards »
T5 Documentation System »
T58 System of standards infield of nature conservation and improvement of use of natural resources, labor safety, scientific organization of labor »
National Standards for OKSTU »
SYSTEMS OF GENERAL TECHNICAL AND ORGANIZATIONAL-METHODOLOGICAL STANDARDS »
Occupational safety standards system (SSBT). Scientific organization of labor. Safety precautions. Sanitation and occupational health »
As a Replacement Of:
GOST 12.3.016-79: Occupational safety standards system. Building. Anticorrosive protective works. Safety requirements
The Document References:
GOST 12.0.004-79: Occupational safety standards system. Labour safety worker training organization. General principles
GOST 12.0.004-90: Organization of training for labor safety. General rules
GOST 12.1.001-83: Occupational safety standards system. Ultrasound. General safety requirements
GOST 12.1.001-89: Occupational safety standards system. Ultrasound. General safety requirements
GOST 12.1.003-83: Noise. General safety requirements
GOST 12.1.004-85: Occupational safety standards system. Fire safety. General requirements
GOST 12.1.004-91: Fire safety. General requirements
GOST 12.1.005-76: Occupational safety standards system. Working zone air. General hygiene requirements
GOST 12.1.005-88: General sanitary requirements for working zone air
GOST 12.1.007-76: Noxious substances. Classification and general safety requirements
GOST 12.1.010-76: Explosion safety. General requirements
GOST 12.1.012-78: Occupational safety standards system. Vibration. General safety requirements
GOST 12.1.012-90: SSBT. Occupational Safety Standards System. Vibrational safety. General requirements
GOST 12.1.018-79: Occupational safety standards system. Static electricity Intrinsic safety. General requirements
GOST 12.1.018-93: Fire and explosion safety of static electricity. General requirements.
GOST 12.1.030-81: Electrical safety protective grounding, neutral grounding
GOST 12.1.046-85: Occupational safety standards system. Building. Lighting of building sites
GOST 12.2.003-91: Industrial equipment. General safety requirements
GOST 12.2.061-81: Occupational safety standards system. Industrial equipment. General safety requirements to working places
GOST 12.3.002-75: Occupational safety standards system. Manufacturing processes. General safety requirements
GOST 12.3.009-76: Occupational safety standards system. Loading and unloading works General safety requirements
GOST 12.3.010-82: Occupational safety standards system. Industrial packing. Safety requirements under operation
GOST 12.4.009-83: Fire-fighting equipment for protection of units. Basic types. Location and maintenance
GOST 12.4.011-89: Occupational safety standards system. Means of protection. General requirements and classification
GOST 12.4.026-76: Signal colors and safety signs
GOST 12.4.034-85: Occupational safety standards system. Means for individual protection of breathing organs. Classification and marking
GOST 12.4.059-89: Occupational safety standards system. Construction. Protective inventory safeguards. General specifications
GOST 12.4.103-83: Occupational safety standards system. Special protective clothes, personal means of hand and legs protections. Classification
GOST 14192-96: Cargo marking
GOST 24940-96: Buildings and structures. Methods of measuring luminance
GOST 8.001-80: State system of ensuring the unity of measurements. Rules for conducting the state tests of measuring means
GOST 8.002-86: State system for ensuring the uniformity of measurements. State supervision and department control of measuring instruments. Basic regulations
GOST 8.326-78: The State Measurement System. Metrological assurance of development, manufacturing and operation of unstandardized measuring instruments. General principles
GOST 8.326-89: State system for ensuring the uniformity of measurements. Metrological certification measuring instruments
PPB-05-86: Fire Safety Regulations for the Execution of Construction and Installation Work
The Document is Referenced By:
GOST 26825-86: Decontaminable protective polymeric coatings. General technical requirements
GOST 30732-2001: Steel shaped pipes and products with foamed polyurethane thermal insulation in polyethylene jacket. Technical specifications
GOST 30732-2006: Steel pipes and shaped products with foamed polyurethane thermal insulation in protective sheath. Specifications.
GOST 31445-2012: Steel and cast iron tubes and pipes with protective coatings. Technical requirements
GOST 31448-2012: Steel pipes with defensive covering for main gas and oil pipelines. Specifications
GOST 9.402-2004: Unified system of corrosion and ageing protection. Paint coatings. Metal surface preparation for painting
GOST 9.402-80: Metal surface preparation for painting
GOST 9.602-2005: Unified system of corrosion and ageing protection. Underground constructions. General requirements for corrosion protection
GOST 9.602-2016: Unified system of corrosion and ageing protection. Underground constructions. General requirements for corrosion protection
GOST 9.602-89: Constructions, underground. General requirements for corrosion protection
GOST R 51102-97: Decontaminable protective polymeric coatings. General technical requirements
GOST R 51164-98: Steel pipe mains. General requirements for corrosion protection
GOST R 52568-2006: Steel pipes with defensive covering for main gas and oil pipelines. Specifications
GOST R 53384-2009: Steel and cast iron tubes and pipes with protective coatings. Technical requirements
GOST R 55260.1.1-2013: Hydro power plants. Part 1-1. Hydraulic structures of hydropower stations. General safety requirements
GOST R 57991-2017: Trunk pipeline transport of oil and oil products. Steel piles of pipes used for foundation construction of above-ground pipelines supports. General specifications
Manual for SNiP 2.03.11-85: A manual for monitoring the state of building metal structures of buildings and structures in aggressive environments, conducting surveys and designing the restoration of corrosion protection of structures
Manual for SNiP 2.03.11-85: Designer's Guide to Corrosion Protection for Concrete and Reinforced Concrete Structures
Manual for SNiP 2.03.11-85: Manual on the design of corrosion protection for stone, reinforced stone and asbestos-cement structures
Manual for SNiP 3.05.01-85: Manual for the production and acceptance of work when installing ventilation and air conditioning systems
MDS 12-14.2003: Methodological manual for SNiP 12-04-2002
MDS 12-16.2003: Recommended Practice for the Development of Local Regulations (Proprietary Standards) for Use in an Occupational Safety and Health Management Systems in a Construction Organization
MDS 12-22.2005: Recommendations for the application in the construction industry of the requirements of regulatory legal and other regulatory acts containing state regulatory labor protection requirements
Order 2079: List of documents in the field of standardization, the application of which on a voluntary basis to ensure compliance with the requirements of the Federal Law of December 30, 2009 № 384-FZ "Technical Regulations on the Safety of Buildings and Structures
OST 36-100.3.13-85: Labour safety standard system. Processing equipment installation. General safety requirements.
OST 36-111-84: Anti-corrosion protection. Design of work production. Order of development, structure and content.
PB 03-381-00: Regulations of installation of vertical cylindrical steel reservoirs (steel scroll tanks) for petroleum and petroleum products
PB 03-428-02: Safety Requirements for Construction of Underground Structures
PB 06-227-98: Safety regulations for auxiliary workshops of mining enterprises
POT R O-00-97: Occupational Safety and Health Requirements in the Pulp and Paper and Rosin Industry
R 462-82: Guidelines for determining the torque and axial force during the immersion of screw piles
RD 02-01297858-00: Instructions for external insulation of shaped pipeline fittings and valve units with protective polyurethane coating of COPON HYCOTE type, produced by Company 165 E. WOOD, England.
RD 102-011-89: Occupational Safety and Health. Management and Procedural Documents
RD 1300-01297858-04-00: Instructions for applying an external protective combination coating based on insulating materials СHEMP-ТЭСHU. Firms E. WOOD, England and "PEPUS" of the firm "Komplast", Russia in sections of underwater crossings of oil and gas products
RD 153-34.0-20.518-2003: Standard instructions on protection of heat supply system pipelines against external corrosion
RD 153-34.2-03.205-2001: Safety Requirements for Maintenance of Hydraulic Structures and Hydromechanical Equipment of Power Utility Organizations
RD 153-34.3-03.285-2002: Safety Requirements for Construction of Electric Power Transmission Lines and Electrical Installation Work
RD 31.35.01-80: Guidelines for corrosion protection of marine port facilities designed for handling chemicals. Minmorflot, Soyuzmorniiproekt, 1980
RD 3-1297858-02: Instructions for external insulation with epoxy-polyurethane coating “UP-1000/FRUCS 1000A” in factory and field conditions, for valves, shaped fittings and separate pipeline sections.
RD 34.03.201-97: Safety Code for the Operation of the Thermo mechanical Equipment of Electric Power Stations and Heat Networks.
RD 3661-01297858-03-01: Guidelines for corrosion protection of petroleum and oil reservoirs using one-component polyurethane paint coatings
RD 39-132-94: Regulations for Operation, Inspection, Repair and Rejection of the Field Pipelines 1994
RD 413160-02-01297858-03: Corrosion protection rules for stock-tank oil vessels and for dynamic and technological oil settling vessels
RD 51-2.4-007-97: Protection of Soils against Water Erosion in Locations of Linear Sections of Pipelines
Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope
RMD 40-20-2013 Sankt-Peterburg: Designing and installation pipelines for water supply and sewage systems in Saint-Petersburg
RMD 40-20-2016 Sankt-Peterburg: Installation of water supply and drainage networks in St. Petersburg
Rules 00-97: Rules for Occupational Safety and Health in the Pulp and Paper and Forestry Industries (final)
SNiP 12-04-2002: Safety in construction. Part 2. Construction works
SP 229.1325800.2014: Reinforced concrete structures of underground and utility systems. Protection against corrosion
SP 245.1325800.2015: Corrosion protection of communication and utility lines and structures in the oil and gas industry. Production and work acceptance rules
SP 363.1325800.2017: Translucent coating and lights of buildings and structures. Desing rules
SP 72.13330.2016: Protection of buildings, facilities and structures against corrosion
STO-SA-03-002-2009: Rules for the design, manufacture and installation of vertical cylindrical steel tanks for oil and oil products
TU 1390-001-86695843-08: Steel pipes with a diameter of 57-1420 mm with an external two-layer and three-layer polyethylene coating
TU 1390-007-32256008-05: External heat-insulating coating of pipes and fittings with a diameter of 57 ... 720 mm
TU 1390-010-86695843-2011: Steel pipes and pipeline components welded with an internal anti-corrosion coating based on a paint material with high dry residue
TU 1390-012-86695843-2011: Steel pipes and fittings 57–2020 mm in diameter with internal single-layer coating based on liquid solvent-free epoxy materials
TU 1390-014-86695843-2011: Steel pipes and parts of pipelines with external two-layer epoxy anticorrosion coating
TU 1390-015-86695843-2011: Steel pipes with Stelrant external anticorrosion polyurethane coating
TU 1394-006-86695843-10: Steel pipes with epoxy protective coating
TU 1394-011-86695843-2011: Steel pipes with an external two-layer epoxy coating resistant to ultraviolet radiation. Technical conditions
TU 1469-001-01297858-98: Rings support-guides for the transition of steel pipelines through roads and railways, laid in a protective casing (case). Technical conditions
TU 5764-011-01297858-99: Steel pipes with thermal insulation from polyurethane foam. Technical conditions
TU 5768-005-47114136-02: Steel pipes insulated with polyurethane foam in a polyethylene protective sheath for oil and gas pipelines
TU 5768-009-86695843-2011: Steel pipes with thermal insulation made of polyurethane foam in a protective sheath for oil and gas pipelines
VSN 008-88: Construction of trunk and field pipelines. Anticorrosion and heat insulation
VSN 203-84: Safety Requirements for the Construction of Hi-Rise Reinforced Concrete Structures
|
Customers Who Viewed This Item Also Viewed:
 |
Jet fuels
Language: English |
State system for ensuring the uniformity of measurements. Measurements of liquids and gases flow rate and quantity by means of orifice instruments. Part 5. Measurement procedure
Language: English |
Molded parts of coupler and automatic coupler devices of railway rolling stock. General specifications.
Language: English |
Main-line diesel locomotives. General technical requirements.
Language: English |
Four-wheel bogies of freight cars for mainline railways gauge 1520 (1524) mm. Specifications
Language: English |
Technical ethylcellosolve. Specifications
Language: English |
Automatic coupler model SA-3 and its components. Design and dimensions
Language: English |
Railway rolling stock. Devices to prevent running gear parts from dropping to the track. Methods of controlling strength characteristics
Language: English |
Electric heating devices for heating rolling stock railways. Safety requirements and test methods
Language: English |
Ice cream. General technical requirements
Language: English |
Welded joints in steel structures of railway rolling stock. Requirements for design, implementation and quality control
Language: English |
Locomotives The method of dynamic strength tests
Language: English |
Pipe fittings. Ball valves made of brass. General specifications
Language: English |
Railway rolling stock. Norms for permissible exposure of railway track and test methods
Language: English |
Locomotives. Requirements for strength and dynamic qualities
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
