GOST 12356-81
ГОСТ 12356-81
|
|
Steels alloyed and highalloyed. Methods of the determination of titanium
Стали легированные и высоколегированные. Методы определения титана
Status: Effective. The limitation of effectiveness has been lifted: Protocol No. 5-94 of the IGU dated 05.17.94 (IUS 11-12-1994)
The standard establishes an extraction-photometric method for the determination of tantalum in ferroniobium.
Стандарт устанавливает экстракционно-фотометрический метод определения титана (при массовой доле титана от 0,005 до 0,3 %), фотометрический метод (при массовой доле титана от 0,01 до 3,5%) в легированных и высоколегированных сталях.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstandart of the USSR,
4/7/1981
SKU: RUSS63561
The Product is Contained in the Following Classifiers:
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.12 Testing and control of products of metallurgical industry »
4.12.1 Ferrous metals »
ISO classifier »
77 METALLURGY »
77.080 Ferrous metals »
77.080.20 Steel »
National standards »
77 METALLURGY »
77.080 Ferrous metals »
77.080.20 Steel »
National Standards for KGS (State Standards Classification) »
Latest edition »
V Metals and metal products »
V3 Steel quality and high quality (quality stock) »
V39 Test methods. Packaging. Marking »
National Standards for OKSTU »
CAST IRON, FERRO ALLOYS, STEEL »
Ferroalloys containing tungsten, molybdenum and vanadium »
The Document References:
GOST 10929-76: Reagents. Hydrogen peroxide. Specifications
GOST 11125-84: Super pure nitric acid. Specifications
GOST 13610-79: Iron carbonyl for radiotechnical uses. Specifications
GOST 14261-77: Hydrochloric acid super pure. Specifications
GOST 14262-78: Super pure sulphuric acid. Specifications
GOST 19807-91: Wrought titanium and titanium alloys. Grades
GOST 20015-88: Chloroform. Specifications
GOST 28473-90: Iron, steel, ferroalloys, metal chromium and metal manganese. General requirements for methods of analysis
GOST 3118-77: Reagents. Hydrochloric acid. Specifications
GOST 3760-79: Reagents. Ammonia water. Specifications.
GOST 4204-77: Reagents. Sulphuric acid. Specifications
GOST 4461-77: Reagents. Nitric acid. Specifications
GOST 5817-77: Reagents. Tartaric acid. Specifications
GOST 7172-76: Reagents. Potassium pyrosulphate
The Document is Referenced By:
GOST 34468-2018: Center plates for freight cars of 1520 mm track gauge railways. General specifications
FTS ZhT TsT 028-99: Brake block holders of the locomotives for main-line railways. Certification requirements
GOST 10160-75: Magnetically soft precision alloys
GOST 10533-86: Cold-rolled thermostatic bimetal strip
GOST 10543-82: Surfacing steal wire. Specifications
GOST 10543-98: Steel surfacing wire. Specifications
GOST 10702-2016: Rolled high-quality structural non-alloy and alloy steel for cold forging. General specifications
GOST 10702-78: Steel bars, carbon and alloy, structural, for cold extruding and upsetting. Specifications
GOST 10884-81: Heat strengthened steel bars of periodical section for concrete reinforcement. Technical requirements
GOST 10884-94: Thermomechanically hardened steel bars for reinforced concrete constructions. Specifications
GOST 10885-85: Hot-rolled two-ply corrosion-resistant steel sheets
GOST 10994-74: Precision alloys. Grades.
GOST 11068-81: Electric-welded pipes from corrosion-resistant steel
GOST 11268-76: Structural thin sheets of special purpose alloyed high quality steel
GOST 11269-76: Universal rolled plates and wide strips made of special purpose structural high-grade Alloy steel
GOST 11474-76: Bent-steel sections. Specifications
GOST 12132-66: Electrowelded and seamless steel tubes for automotive and bicycle industries. Specifications
GOST 1215-79: Malleable iron castings
GOST 12766.1-90: High electrical resistant wire made of precision alloys
GOST 12766.2-90: Strip from precision high electric resistance alloys
GOST 12766.3-90: Precision gauged alloys of high electric resistance
GOST 12766.4-90: Graded rolled stock of precision alloys of high electrical resistance
GOST 12766.5-90: Flattened strip of high electric resistance precision alloys
GOST 13084-88: Powders of high-alloyed steels and alloys. Specifications
GOST 13663-86: shaped steel pipes technical requirements
GOST 14080-78: Precision alloy strip with specified temperature coefficient of linear expansion. Specifications
GOST 14081-78: Wire of precision alloys with specified temperature coefficient of linear expansion. Specifications
GOST 14082-78: Bars and plates precision alloys with assigned temperature coefficient of linear expansion. Specifications
GOST 14117-85: Strip made from precision alloys for elastic elements
GOST 14118-85: Wire made of precision alloys, designed for elastic elements
GOST 14119-85: Rods from precision alloys for elastic elements
GOST 14162-79: Steel tubes of small dimensions (capillary)
GOST 17066-80: Low-alloyed structural steel sheets and strips in coils. Marks and technical requirements
GOST 17066-94: Thin sheet rolled stock of high strength steel
GOST 18143-72: Corrosion resistant
GOST 18907-73: Hard-worked heat-treated ground bars from high-alloy and corrosion-resistant steel
GOST 18968-73: Corrosion-resistant and high temperature steel rods and strips for steam turbine blades
GOST 19277-73: Seamless steel tubes for oil and fuel lines. Specifications
GOST 19281-2014: High strength rolled steel. General specification
GOST 19281-73: Low alloyed sorted and shaped steel
GOST 19281-89: Rolled steel with increased strength. General specifications
GOST 19282-73: Low-alloyed plate strip universal steel. Specifications
GOST 19442-74: Shaped bars for blades and bars for blade coupling of steam turbines made of corrosion-resistant and high-temperature steel
GOST 20072-74: Heat-resistant steel
GOST 20295-85: Welded steel pipes for gas and oil pipelines. Technical specifications
GOST 20700-75: Bolts, studs, nuts and washers for flanged and anchor connections, corks and yokes with medium temperature from 0 to 650 °C. Specifications
GOST 21022-75: Chromic steel for precise bearings. Specifications
GOST 21357-87: Castings made of cold- and wear- resistant steel
GOST 21729-76: Construction cold-shaped and heat-shaped carbon and alloy steel pipes. Specification.
GOST 22366-93: Iron-based sintered filler ribbon electrode
GOST 2246-70: Welding steel wire. Specifications
GOST 23270-89: Tube-billets for machining
GOST 23304-78: Bolts, studs, nuts and washers for flanged connections for atomic power plants. Technical requirements. Acceptance. Test methods. Marking, packing, transportation and storage
GOST 23705-79: Hot-rolled and forged high-temperature alloy bars
GOST 24897-81: Solid magnetic deformed materials. Marks
GOST 25054-81: Forgings made of corrosion-resistant steels and alloys
GOST 26101-84: Welding powdered wire
GOST 26131-84: Heat-resisting steel forgings. General specifications
GOST 27772-2015: Structural steel structure rolled products. General specifications
GOST 27772-88: structural steel structure rolled products. General specifications
GOST 2787-2019: Ferrous metals are secondary. General specifications
GOST 2787-75: Recycled ferrous metals
GOST 28378-89: Iron-based powder structural materials. Types
GOST 30245-2012: Steel bent closed welded square and rectangular section for building. Specifications
GOST 30563-98: Seamless cold-worked carbon and alloy steel tubes for special purposes. Specifications
GOST 30564-98: Seamless hot-worked carbon and alloy steel pipes and tubes with special properties. Specifications
GOST 31447-2012: Steel weldes pipes for trunk gas pipelines, oil pipelines and oil products pipelines. Specifications
GOST 31624-2012: Special alloy wire for connecting load-bearing and implanted members of products for organism's bones. General specifications
GOST 31841-2012: Petroleum and natural gas industries. Well service equipment. General technical requirements
GOST 31844-2012: Petroleum and natural gas industries. Drilling and production equipment. Hoisting equipment. General technical equipments
GOST 32400-2013: Molded side frame and bolster beam of вogies for railway freight wagons. Specifications
GOST 32528-2013: Hot-deformed seamless steel pipes. Specifications
GOST 32678-2014: Pipes steel seamless and welded cold-bent for general purpose. Specifications.
GOST 3269-78: Stationary brake shoe holder for freight wagons of the 1520 mm gauge railways. Specifications
GOST 33228-2015: Steel welded pipes for general purposes. Specifications
GOST 34458-2018: Articulated connector devices with cast male and female parts for freight cars of articulated type. General technical specifications
GOST 34636-2020: Pipe billet. General specifications
GOST 4543-2016: Metal products from structural alloy steel. Specification
GOST 4543-71: Structural alloyed steel
GOST 4986-79: Cold-rolled band from corrosion-resistant and heat-resistant steel
GOST 5267.0-90: Hot-rolled sections for car building. General specifications
GOST 550-75: Seamless steel tubes for petroleum processing and petrochemical industry. Specifications
GOST 5520-2017: Rolled plate of unalloyed and alloyed steel for boilers and vessels working under pressure. Technical conditions
GOST 5520-79: Carbon, low-alloy and alloy sheet steel for boilers and pressure vessels. Specifications
GOST 5521-86: Weldable steel for shipbuilding
GOST 5521-93: Shipbuilding rolled steel
GOST 5582-75: Corrosion-resistant, heat-proof, and heat-resistant thin-sheet rolled stock
GOST 5632-2014: Stainless steels and corrosion resisting, heat-resisting and creep resisting alloys. Grades
GOST 5632-72: High-alloy steels and corrosion-proof, heat-resisting and heat treated alloys. Grades
GOST 5781-82: Hot-rolled steel for reinforcement of ferroconcrete structures. Specifications
GOST 5949-2018: Stainless corrosion resisting, heat-resisting and creep resisting steel and alloy on iron-nickel-based products. Specifications
GOST 5949-75: Gauged corrosion-resistant, heat-resistant and high-temperature steel shape
GOST 5950-2000: Tool alloy steel bars, strips and coils. General specifications
GOST 5950-73: Bars and strips from a toolhouse steel alloy
GOST 7350-77: Plate, corrosion-resistant, heat-resistant, and high-temperature steel
GOST 7909-56: Drill prospecting pipes and coupling to them
GOST 800-78: Bearing tubes. Technical requirements
GOST 801-2022: Rolled bearing steel. Technical conditions
GOST 801-78: Bearing steel. Specifications
GOST 8479-70: Structural carbon and alloy steel forgings
GOST 8536-79: Blanks for marine shafts and rudder stocks. Specifications
GOST 8731-74: Seamless hot-deformed steel pipes. Specifications
GOST 8733-74: Cold-formed and heat-formed seamless steel pipes. Technical requirements
GOST 8733-87: Steel seamless cold-deformed and heat-deformed pipes. Technical specifications
GOST 8803-89: Round finer wire made of precision alloys with high electrical resistivity for resistive elements
GOST 9466-75: Covered metal electrodes for manual arc welding of steels and deposition. Classification and general specifications
GOST 977-88: Steel castings. General specifications
GOST R 50.04.05-2018: Conformity assessment system for the use of nuclear energy. Conformity assessment in the form of testing. Qualification testing for the steels and alloys melting and casting procedures
GOST R 50.05.17-2019: Conformity assessment system in the field of atomic energy use. Steel castings for equipment and pipelines of nuclear power plants. Control procedure
GOST R 51396-99: Special alloy wire for connecting load-bearing and implanted members of products for organism's bones. General specifications
GOST R 52079-2003: Steel welded pipes for trunk gas pipelines, oil pipelines and oil products pipelines. Specifications
GOST R 52664-2010: Welded pipe sheet piles. Specifications
GOST R 52927-2008: Rolled stock of normal, increased- and high-strength steel for shipbuilding. Specifications
GOST R 52927-2015: Rolled of normal, increased - and high-strength steel for shipbuilding. Specifications
GOST R 53383-2009: Hot-deformed seamless steel pipes. Specifications
GOST R 53444-2009: Motor vehicles. Crankshafts of engines. General technical requirements and methods of tests
GOST R 53680-2009: Petroleum and natural gas industries. Well service equipment. General technical requirements
GOST R 53683-2009: Petroleum and natural gas industries. Drilling and production equipment. Hoisting equipment. General technical rudiments
GOST R 53808-2010: Automobile engines. Camshafts. Technical requirements and test methods
GOST R 53932-2010: Tube billet. General specifications
GOST R 54159-2010: Seamless and welded cold deformed steel pipes for general purposes. Specifications
GOST R 54864-2011: Hot-deformed seamless steel pipes for the welded steel structures. Specifications
GOST R 54908-2012: Heat-resistant steel metal products. Specifications
GOST R 54909-2012: Metal products from alloyed steel and alloys for valves of internal combustion engines. Specifications
GOST R 54929-2012: Steel welded pipes for general purposes. Specifications
GOST R 56030-2014: Pipes for details of bearings. Technical specifications
GOST R 56299-2014: Rolled products from bearing steel. Specifications
GOST R 56403-2015: Trunk pipelines for oil and oil products transportation. Welded steel pipes. Specifications
GOST R 57180-2016: Welding joints. Methods for determination of mechanical properties, macrostructure and microstructure
GOST R 57587-2017: Products obtained by additive processes. Methods of control and testing
GOST R 57837-2017: Hot-rolled steel I-beams with parallel edges of flanges. Specifications
GOST R 58177-2018: United power system and isolated power systems. Thermal power plants. Thermal-mechanical equipment of thermal power plants. Control of condition of metal. Norms and requirements
GOST R 58915-2020: Rolled plates of cryogenic steels. Specifications
GOST R 70235-2022: Cold-rolled strip of thermo-metals. Technical conditions
GOST R 70731.4-2023: Steel pipes for manufacture of equipment and pipelines of nuclear power plants. General technical conditions. Part 4. Longitudinal welded steel pipes made of 08Х18Н10Т austenitic class steel.
ODM 218.2.044-2014: Recommendations for the performance of instrument and instrumental measurements in assessing the technical condition of bridge structures on highways
OST 108.004.10-86: Quality control program of nuclear energetics products.
OST 108.020.03-82: Stamped billets of turbine and compressor blades made of corrosion-resistant and heat-resistant steel. General Specifications. (2010 edition, including 3 amendments)
OST 108.030.124-85: Details and prefabricated units made of pearlitic steels for pipelines with environment pressure P>2.2 MPa (22 kg/cm2) in nuclear power plants. General Specifications.
OST 108.109.01-92: Basic part billets made of corrosion-resistant steels of austenitic class. Technical conditions.
OST 108.958.04-85: General-purpose forgings for turbines and compressors. Specification.
OST 108.961.04-80: Castings of carbon and alloy steel, nickel-base alloys for components of stationary steam turbines and compressors. Specifications.
OST 24.125.60-89: Details and prefabricated units of steam and hot water in thermal power plants. General Specifications.
OST 95-29-72: Billets made of corrosion-resistant steels of 12Х18Н9Т, 12Х18Н10Т, 08Х18Н10Т, 10Х17Н13М2Т, 12Х18Н12Т and 03Х21Н32М3Б types.
OTT 1.5.2.01.999.0157-2013: The supporting structures of the elements of nuclear plants with water-cooled power reactors. General technical requirements
PNAE G-7-010-89: Equipment and pipelines of nuclear energy facilities. Welded joints and beads. Testing rules
PNAE G-7-025-90: Steel castings for nuclear plants. Rules of control
PNST 394-2020: Steel pipes for the manufacture of equipment and pipelines of nuclear plants. General specifications. Part 1. Seamless steel pipes from unalloyed and alloyed steels
PNST 595-2022: Oil and gas industry. Underwater production systems. General characteristics and rules of application of structural steels for building structures
RD 24.207.01-90: Piping fittings. Water-flap average life time dependence on specific pressure on the sealing surface
RD 34.17.414-95: Procedural Guidelines for Chemical and Physical Chemical Phase Analysis of Metal in Thermal Power Station Electrical Equipment
RD RTM 38.14.006-86: Method for determining the service life of the coils of catalytic reforming furnaces that have worked out the project resource
SP 101-34-96: Set of rules for construction of trunk pipelines (SPSMG). Code of practice for selection of pipes for the construction of trunk gas pipelines. RAO "Gazprom", 11/15/90
ST SSFZhT TsT 052-99: Shoes and brake pads for locomotives running on main railways. Standard testing method.
ST TsKBA 010-2004: Pipe fittings. Forgings, stampings and rolled products. Technical requirements
ST TsKBA 014-2004: Pipe fittings. Steel castings. General technical conditions
TU 1310-043-38948552-2017: Hot-deformed seamless tubes mechanically machined from corrosion-resistant steel 08X18H10T
TU 14-3-460:2009: Seamless steel pipes for steam boilers and pipelines. Technical conditions
TU 14-3R-110-2009: Thick-walled hot-deformed pipes made of corrosion-resistant steel. Technical conditions
TU 14-3R-115-2010: Centrifugally cast pipes for the chemical and petrochemical industries. Technical conditions
TU 14-3R-54-2001: Seamless hot deformed pipes made of steel grade 20YUCH. Technical conditions
TU 14-3R-55-2001: Seamless steel pipes for steam boilers and pipelines
TU 3-1002-77: Corrosion-resistant high-strength spring wire
Customers Who Viewed This Item Also Viewed:
|
Liquid lubricating and plastic materials. Method of test for lubricating properties on four ball machine
Language: English |
Rules of development, coordination, approval and composition of technical and economic assessment for construction
Language: English |
Potassium chloride
Language: English |
United power system and isolated power systems. Operative-dispatch management. Frequency control and control of active power. Norms and requirements
Language: English |
Armour clothes. Classification and general technical requirements
Language: English |
Food products. Methods for detection and quantity determination of coliformes
Language: English |
Hotels design
Language: English |
Railroad rails. General specifications
Language: English |
|
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.