GOST 30416-2012

ГОСТ 30416-2012

Soils. Laboratory testing. General requirements

Грунты. Лабораторные испытания. Общие положения

Status: Effective - Supersedes. IUS 2-2013

This standard establishes the general requirements for methods of laboratory determination of the characteristics of the physicomechanical properties of soils when they are studied for construction.

Настоящий стандарт устанавливает общие требования к методам лабораторного определения характеристик физико-механических свойств грунтов при их исследовании для строительства

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Federal Agency for Technical Regulation and Metrology, 11/9/2012

SKU: RUSS63763

Price: $225.00




The Product is Contained in the Following Classifiers:

Construction (Max) » Regulations » Documents System of normative documents in construction » 5. Regulatory documents for building structures and products » k.50 Foundations and foundations of buildings and structures »

PromExpert » SECTION V. ENVIRONMENTAL PROTECTION. NATURE USE » I Environmental-legal and economic-legal mechanisms for environmental protection » 1 Management infield of environmental protection and environmental management » 1.5 Environmental monitoring and control »

ISO classifier » 13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY » 13.080 The quality of soil. Soil science »

National standards » 13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY » 13.080 The quality of soil. Soil science »

ISO classifier » 13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY » 13.080 The quality of soil. Soil science » 13.080.01 Soil quality and soil science in general »

National standards » 13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY » 13.080 The quality of soil. Soil science » 13.080.01 Soil quality and soil science in general »

National Standards for KGS (State Standards Classification) » Latest edition » Zh Construction and building materials » Zh3 Building structures and parts » Zh39 Test methods. Packaging. Marking »


The Document is Replaced With:

GOST 30416-2020: Soils. Laboratory tests. General Provisions

As a Replacement Of:

GOST 30416-96: Soils. Laboratory testing. General requirements

The Document References:

GOST 1.0-2015: Interstate system for standardization. Basic principles

GOST 1.2-2015: Interstate System for Standardization. Interstate standards. Rules for development, taking over, renovation and cancellation

GOST 10110-87: Circles diamond

GOST 10197-70: Stands and supports for measuring heads. Specifications

GOST 12071-2000: Soils. Sampling, packing, transportation and storage of samples

GOST 166-89: Vernier callipers. Specifications

GOST 20522-2012: Soils. Methods of statistical treatment of test results

GOST 20522-96: Soils. Statistical treatment of the test results

GOST 22733-2002: Soils. Laboratory method for determination of maximum density.

GOST 24104-2001: Laboratory scales. General technical requirements

GOST 24104-88: General purpose and reference laboratory balances

GOST 25100-2011: Soils. Classification

GOST 25100-95: Soils. Classification

GOST 30416-96: Soils. Laboratory testing. General requirements

GOST 3749-77: Checking 90° squares. Specifications

GOST 5180-84: Soils. Laboratory methods for determination

GOST 577-68: Clock-type dial indicators graduated in unit divisions of 0,01 mm. Specifications

GOST 7328-82: General-purpose and reference mass gages

GOST 9696-82: Multi-revolution dial indicators graduated in 0,001 and 0,002 mm. Types. Basic parameters. Specifications

GOST R 53228-2008: Non-automatic weighing instruments. Part 1. Metrological and technical requirements. Tests

The Document is Referenced By:

GOST 12071-2014: Soils. Sampling, packing, transportation and keeping of samples

GOST 20276-2012: Soils. Field methods for determining the strength and strain characteristics

GOST 22733-2016: Soils. Laboratory method for determination of maximum density

GOST 23161-2012: Soils. Method of laboratory determination of subsiding characteristics

GOST 23740-2016: Soils. Method for determination of organic substances

GOST 25584-2016: Soils. Laboratory methods for determination of filtration factor

GOST 32868-2014: Public roads. Requirements for engineering and geological surveys

GOST 33063-2014: Automobile roads of general use. Classification of terrain and ground types

GOST 34276-2017: Soils. Laboratory methods for determining the specific resistance of penetration

GOST 34467-2018: Soils. Laboratory method for determining carbonate content

GOST 5180-2015: Soils. Methods for laboratory determination of physical characteristics

GOST R 54496-2011: Water. The determination of toxicity with use of green freshwater unicellular algae

GOST R 55260.1.1-2013: Hydro power plants. Part 1-1. Hydraulic structures of hydropower stations. General safety requirements

GOST R 56236-2014: Water. Determination of toxicity by survival of freshwater crustaceans. Daphnia magna Straus

GOST R 56353-2015: Soils. Laboratory methods for determination of soil dynamic properties

GOST R 56598-2015: Resources saving. Waste treatment. Technical guidelines for specially engineered landfill

GOST R 57163-2016: Water. Determination of toxicity by survival rate of one-day young fish Poecilia reticulata Peters in fresh and marine water

GOST R 57166-2016: Water. Determination of toxicity by survival rate of freshwater infusoria Paramecium caudatum Ehrenberg

GOST R 57208-2016: Tunnels and subways. Rules of inspection and elimination of defects and damages under operation

GOST R 58326-2018: Soils. The method of laboratory determination of parameters of compaction

GOST R 58327-2018: Soils. Method for laboratory determination of relaxation parameters

ODM 218.2.033-2013: Guidelines for the implementation of engineering and geological surveys on landslide-prone slopes and slopes of roads

ODM 218.2.037-2013: Guidelines for survey work in the overhaul of roads

ODM 218.3.059-2015: Guidelines for the use of electromagnetic devices for the operational control of the quality of soil compaction

ODM 218.3.076-2016: Guidelines for the selection of soil stabilizers and soil mixtures for road construction

ODM 218.3.094-2017: Recommendations on engineering and geological surveys and design of engineering protection structures on road sections with the development of slope processes

ODM 218.3.120-2020: Methodical recommendations for the calculation of road embankments on soft base soils using geosynthetic materials

PNST 310-2018: Roads are public. Bridges and pipes road. Methods for determining the geometric and physical parameters

PNST 338-2018: General automobile roads. Subgrade. Methods for determining geometric and physical parameters

SP 22.13330.2016: Soil bases of buildings and structures

SP 248.1325800.2016: Underground structures. Design rules

SP 249.1325800.2016: Design and construction of underground utilities by closed and cut-and-cover methods

SP 25.13330.2012: Soil bases and foundations on permafrost soils

SP 341.1325800.2017: Underground engineering communications. Lining of by a method of the horizontal directional drilling

SP 361.1325800.2017: Buildings and constructions. Protective measures in the zone of influence of construction of underground objects

SP 369.1325800.2017: Fixed offshore platforms. Design principles

SP 39.13330.2012: Rock fill dams

SP 407.1325800.2018: Excavation. Rules for the performance of work by hydromechanization

SP 420.1325800.2018: Engineering surveys for construction in areas of landslide development. General requirements

SP 446.1325800.2019: Engineering and geological surveys for construction. General rules for the production of work

SP 448.1325800.2019: Engineering surveys for construction in areas of subsidence. General requirements

SP 45.13330.2017: Earthworks, grounds and footings

SP 47.13330.2012: Engineering survey for construction. Basic principles

SP 473.1325800.2019: Buildings, structures and complexes are underground. Urban planning rules

Customers Who Viewed This Item Also Viewed:

Petroleum for oil-processing plants. Specifications
Language: English
Price: $18.00
Electrical articles. General requirement for environment mechanical stability
Language: English
Price: $28.00
Rules of Electrical Installations Design (Russian Electrical Code). 7th Edition. All sections and exhibits
Language: English
Price: $478.76
Power transformer on-load tap-changing devices. General specifications
Language: English
Price: $167.00
Conical pipe thread. Profile, basic dimensions and tolerances
Language: English
Price: $71.00
Glass and glass products. Visual faults. Terms and definitions
Language: English
Price: $158.00
Glass and glass products. Inspection methods for geometric parameters and appearance
Language: English
Price: $110.00
Weldable deformed reinforcing rolled products of A500C and B500C classes for reinforcement of concrete constructions. Specifications
Language: English
Price: $112.00
Crude petroleum. General specifications
Language: English
Price: $58.00
Power transformers. Test methods of tap changing devices
Language: English
Price: $626.00
Unified system for design documentation. Stages of designing
Language: English
Price: $71.00
White sugar. Specifications
Language: English
Price: $279.00
Stainless steels and corrosion resisting, heat-resisting and creep resisting alloys. Grades
Language: English
Price: $215.00
Rolled of normal, increased - and high-strength steel for shipbuilding. Specifications
Language: English
Price: $1,639.74
Guidelines for the photometric determination of hydrogen sulfide in the air
Language: English
Price: $62.00
Tempered glass. Specifications.
Language: English
Price: $149.00
Glass with low emissivity hard coating. Specifications.
Language: English
Price: $212.00
Glass laminated. Specifications.
Language: English
Price: $231.00
Water quality. Sewage water
Language: English
Price: $120.30
Passenger cars. Windscreen defrosting and demisting systems. Technical requirements and test methods
Language: English
Price: $97.00

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!