GOST 30804.6.1-2013

ГОСТ 30804.6.1-2013

Еlectromagnetic compatibility of technical equipment. Immunity of technical equipment intended for use in residential, commercial and light-industrial environments. Requirements and test methods

Совместимость технических средств электромагнитная. Устойчивость к электромагнитным помехам технических средств, применяемых в жилых, коммерческих зонах и производственных зонах с малым энергопотреблением. Требования и методы испытаний

Status: Effective - Introduced for the first time. IUS 12-2013

The standard establishes the requirements for ensuring electromagnetic compatibility in terms of resistance to electromagnetic interference (hereinafter referred to as interference) to electrical, electronic and electronic products and equipment (hereinafter referred to as technical means) intended for use in residential, commercial areas and industrial areas with low power consumption also relevant test methods. The scope of the standard covers the frequency range from 0 to 400 GHz. Testing of technical equipment (TS) at frequencies in relation to which the requirements for installed are not carried out. The standard is applied in the absence of interstate standards in the field of electromagnetic compatibility, which establish noise immunity requirements for specific types of vehicles for use in residential, commercial and industrial areas with low power consumption. The requirements of this standard apply to vehicles connected directly to low-voltage distribution networks, and vehicles that are powered by DC sources specifically designed for this purpose and connected to distribution networks. The requirements of this standard also apply to vehicles powered by batteries or from low-voltage electrical networks that are not low-voltage electrical distribution networks, if these vehicles are intended for use in residential, commercial areas and production areas with low power consumption

Стандарт устанавливает требования по обеспечению электромагнитной совместимости в части устойчивости к электромагнитным помехам (далее - помехи) к электротехническим, электронным и радиоэлектронным изделиям и аппаратуре (далее - технические средства), предназначенным для применения в жилых, коммерческих зонах и производственных зонах с малым энергопотреблением, а также методы соответствующих испытаний. Область применения стандарта охватывает полосу частот от 0 до 400 ГГц. Испытания технических средств (ТС) на частотах, применительно к которым требования на установлены, не проводят. Стандарт применяют при отсутствии межгосударственных стандартов в области электромагнитной совместимости, устанавливающих требования помехоустойчивости для ТС конкретных групп, предназначенных для применения в жилых, коммерческих зонах и производственных зонах с малым энергопотреблением. Требования настоящего стандарта распространяются на ТС, подключаемые непосредственно к распределительным электрическим сетям низкого напряжения, и ТС, питание которых осуществляется от специально предназначенных для этой цели источников постоянного тока, подключаемых к распределительным электрическим сетям. Требования настоящего стандарта распространяются также на ТС, питание которых осуществляется от батарей или от низковольтных электрических сетей, не являющихся распределительными электрическими сетями низкого напряжения, если указанные ТС предназначены для применения в жилых, коммерческих зонах и производственных зонах с малым энергопотреблением

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 16

Approved: Federal Agency for Technical Regulation and Metrology, 6/22/2013

SKU: RUSS63769

Price: $218.25




The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 33 Telecommunications. Audio and Video »

Evidence base (TR CU, Technical Regulation of the Customs Union) » 020/2011 TR CU. Electromagnetic compatibility of technical means » Regulations and standards (to ТР ТС ТС 020/2011) »

ISO classifier » 33 TELECOMMUNICATIONS. AUDIO AND VIDEO EQUIPMENT » 33.100 Electromagnetic Compatibility (EMS) » 33.100.20 Security »

National standards » 33 TELECOMMUNICATIONS. AUDIO AND VIDEO EQUIPMENT » 33.100 Electromagnetic Compatibility (EMS) » 33.100.20 Security »


The Document References:

GOST 30372-95: Electromagnetic compatibility of electronic equipment. Terms and definitions

GOST 30804.4.11-2013: Electromagnetic compatibility of technical equipment. Voltage dips, short interruptions and voltage variations immunity. Requirements and test methods

GOST 30804.4.2-2013: Electromagnetic compatibility of technical equipment. Immunity to electrostatic discharge. Requirements and test methods

GOST 30804.4.3-2013: Electromagnetic compatibility of technical equipment. Radiated, radio-frequency, electromagnetic field immunity. Requirements and test methods

GOST 30804.4.4-2013: Electromagnetic compatibility of technical equipment. Immunity to nanosecond impulsive disturbance. Requirements and test methods

GOST 30805.22-2013: Electromagnetic compatibility of technical equipment. Information technology equipment. Radio disturbance. Limits and methods of measurements

The Document is Referenced By:

GOST 30805.14.2-2013: Electromagnetic compatibility of technical equipment. Household appliances, electric tools and similar apparatus. Immunity. Requirements and test methods

GOST 32133.2-2013: Electromagnetic compatibility of technical equipment. Uninterruptible power systems. Requirements and test methods

GOST 32134.1-2013: Еlectromagnetic compatibility of technical equipment. Radio communication equipment. Part 1. Common technical requirements and test methods

GOST 32136-2013: Electromagnetic compatibility of technical equipment. Immunity of audio, video, audio-visiual and entertainment lighting control apparatus for professional use. Requirement and test methods

GOST 32142-2013: Еlectromagnetic compatibility of technical equipment. Lifts, escalators and moving walks. Immunity to electromagnetic disturbances

GOST EN 50412-2-1-2014: Power line communication apparatus and systems on low-voltage electrical installations in the frequency range 1.6 MHz to 30 MHz. Part 2-1. Residential, commercial and industrial environment. Immunity requirements

GOST IEC 61000-6-5-2017: Electromagnetic compatibility (EMC). Part 6-5. Generic standards. Immunity for equipment used in power station and substation environment

GOST IEC 61547-2013: Electromagnetic compatibility. Immunity of lighting equipment of general purpose. Requirements and test methods.

GOST R 51514-2013: Electromagnetic compatibility of technical equipment. Immunity of equipment for general lighting purposes to electromagnetic disturbance. Requirements and test methods

GOST R 52507-2005: Electromagnetic compatibility of technical equipment. Dwelling-house and building electronic systems. Requirements and test methods

GOST R 55226-2012: Gaseous hydrogen. Fuelling stations

GOST R 55622-2013: Complex security systems. Hydraulic gun carriage trunks with Remote control. General technical requirements

GOST R 56940-2016: Temperature recorders for the transport, storage and distribution of chilled, frozen, deep-frozen/quick-frozen food and ice cream. Tests, performance, suitability

GOST 34594.1-2019: Electromagnetic compatibility. "Smart city." General Provisions

GOST 34594.2.1-2019: Electromagnetic compatibility. "Smart city." EMC requirements

GOST 34594.2.2-2019: Electromagnetic compatibility. "Smart city." EMC immunity requirements

GOST EN 12016-2020: Electromagnetic compatibility. Standard for a group of homogeneous products for elevators, escalators and passenger conveyors. Immunity

GOST R 50571.4.44-2019: Electrical installations are low voltage. Part 4.44. Protection for security. Protection against sudden voltage fluctuations and electromagnetic disturbances

GOST R 58092.2.1-2020: Electric energy storage systems (EES). Installation parameters and test methods. general description

GOST R IEC 62061-2015: Safety of machinery. Functional safety of safety-related electrical, electronic and programmable electronic control systems

Customers Who Viewed This Item Also Viewed:

Pipeline valves. Leakage rates of valves
Language: English
Price: $173.25
Explosive atmospheres. Part 0. Equipment. General requirements
Language: English
Price: $1,118.41
Loads and actions
Language: English
Price: $495.00
The method of gas chromatographic determination of phenol and epichlorohydrin in model environments imitating food products
Language: English
Price: $444.92
Metal products from structural alloy steel. Specification
Language: English
Price: $371.25
Obosnovanie bezopasnosti oborudovaniya. Rekomendatsii po podgotovke
Language: English
Price: $67.32
Vessels and apparatus. Norms and methods of strength calculation. Method of strength calculation of shells and heads according to weld misalignment, angular misalignment and shell nonroundness
Language: English
Price: $155.43
Vessels and apparatus. Norms and methods of strength calculation. Requirements for the form of submission of strength calculations performed on a computer
Language: English
Price: $99.00
Vessels and Apparatus. Norms and methods of strength calculation from wind loads, seismic influence and other external loads
Language: English
Price: $311.85
Security of Financial (banking) Operations. Information Protection of Financial Organizations. Basic Set of Organizational and Technical Measures
Language: English
Price: $843.90
Thermal-sensitive paper for printing devices. General specifications
Language: English
Price: $153.26
Vessels and apparatus. Norms and methods of strength calculation. General requirements
Language: English
Price: $178.20
Vessels and apparatus. Norms and methods of strength calculation. Calculation of cylindrical and conical shells, convex and flat bottoms and covers
Language: English
Price: $287.10
Vessels and apparatus. Norms and methods of strength calculation. Strengthening the holes in the shells and bottoms at internal and external pressures. Calculation of the strength of the shells and the bottoms with external static loads on the fitting
Language: English
Price: $227.70
Vessels and apparatus. Norms and methods of strength calculation. Calculation of the strength and tightness of flange connections
Language: English
Price: $227.70
Stainless corrosion resisting, heat-resisting and creep resisting steel and alloy on iron-nickel-based products. Specifications
Language: English
Price: $473.36
Seismic building design code
Language: English
Price: $594.00
Explosive atmospheres. Part 15. Equipment with type of protection
Language: English
Price: $890.46
Non-destructive testing. Optical methods. General requirements
Language: English
Price: $121.77
Hazard classification of chemical products. General requirements
Language: English
Price: $356.40

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!