imgalt

GOST 31356-2007

ГОСТ 31356-2007

Dry building cement binder mixes. Test methods

Смеси сухие строительные на цементном вяжущем. Методы испытаний

Status: Not effective - Canceled in the Russian Federation. Information about the registration of 1187-st dated 12/28/2018 (the official website of Rosstandart); IUS 3-2019

The standard applies to pedigree cocoons of the silkworm supplied by breeding farms to predators for the production of industrial green

Настоящий стандарт распространяется на сухие строительные смеси, изготавливаемые на цементном вяжущем на основе портландцементного клинкера, или на смешанных (сложных) вяжущих на его основе, на глиноземистом цементе, содержащие полимерные добавки в количестве, не превышающем 5,0 % массы смеси, применяемые при строительстве, реконструкции и ремонте зданий и сооружений, и устанавливает методы определения показателей свойств растворных (бетонных) смесей, готовых к применению, и затвердевших растворов (бетонов). Методы определения показателей свойств сухих смесей приведены в ГОСТ 31357. Методы испытания сухих смесей, предназначенных для применения в конкретных условиях, устанавливают в нормативных или технических документах на эти смеси. Настоящий стандарт не распространяется на смеси, изготовленные на специальных, гипсовых и полимерных вяжущих, а также на биоцидные и санирующие смеси

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Federal Agency for Technical Regulation and Metrology, 3/27/2008

SKU: RUSS63782

Price: $283.00

English keywords: binder mixes; cement; dry building; method; test;


imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Regulations » Documents System of normative documents in construction » 6. Regulatory documents for building materials and products » k.62 Concretes and mortars »

ISO classifier » 91 CONSTRUCTION MATERIALS AND CONSTRUCTION » 91.100 Building Materials » 91.100.15 Mineral materials and products »

National standards » 91 CONSTRUCTION MATERIALS AND CONSTRUCTION » 91.100 Building Materials » 91.100.15 Mineral materials and products »

National Standards for KGS (State Standards Classification) » Latest edition » Zh Construction and building materials » Zh1 Construction materials » Zh19 Test methods. Packaging. Marking »


The Document References:

GOST 1.0-92: State System for Standardization of Russian Federation. Basic principles

GOST 10060.0-95: Methods for the determination of frost-resistance. General requirements

GOST 10060.1-95: Concretes, Basic Method For The Determination Of Frost-Resistance

GOST 10060.3-95: Concretes. Dilatometric rapid method for the determination of frost-resistance

GOST 10178-85: Portland cement and portland blastfurnace slag cement. Specifications

GOST 10180-90: Concretes. Methods for strength determination using reference specimens

GOST 12730.3-78: Concretes. Method of determination of water absorption

GOST 13015-2003: Concrete and reinforced concrete products for construction. General technical requirements. Rules for acceptance, marking, transportation and storage

GOST 166-89: Vernier callipers. Specifications

GOST 1770-74: Laboratory volumetric glassware. Cylinders, beakers, measuring flasks, test tubes. General specifications

GOST 22685-89: Moulds for making control specimens of concrete. Specifications

GOST 23732-79: Water for concretes and mortars. Specifications

GOST 24104-2001: Laboratory scales. General technical requirements

GOST 26633-91: Heavy-weight and sand concretes. Specifications

GOST 27006-86: Concretes. Rules for mix proportioning

GOST 28570-90: Concretes. Methods of strength evaluation on cores drilled from structures

GOST 30744-2001: Cements. Methods of testing with using polyfraction standard sand

GOST 310.4-81: Cements. Methods of tests of bending and compression strengths

GOST 31108-2003: General structural Portland clinker cements. Specifications

GOST 31189-2003: Dry building mixes. Classification

GOST 31357-2007: Dry bulding cement binder mixes. General specifications

GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications

GOST 5802-86: Mortars. Test methods.

GOST 7473-94: Ready-mixed concrete. Specifications

GOST 8.568-97: Certification of test equipment

GOST 8.568-99: State system for ensuring the uniformity of measurements. Standard platinum resistance thermometers of the first and second grades. Methods of calibration

GOST 8267-93: Crushed stone and gravel of solid rocks for construction works. Specifications

GOST 8736-93: Sand for construction works. Specifications

SNiP 10-01-94: System of normative documents in construction. Basic provisions.

The Document is Referenced By:

GOST 23789-2018: Gypsum binders. Test methods

GOST 31357-2007: Dry bulding cement binder mixes. General specifications

GOST 31358-2007: Dry building flooring cement binder mixes. Specifications

GOST 31358-2019: Dry building floor mixes. Technical specifications

GOST 31376-2008: Dry building mixtures based on gypsum binder. Test methods

GOST 31387-2008: Dry building рutty gypsum binder mixes. Specifications

GOST 32017-2012: Products and systems for the protection and repair of concrete structures. Requirements for systems for concrete protection in the course of repair works

GOST 33083-2014: Dry building plaster cement binder mixes. Specifications

GOST 33699-2015: Dry building putty cement binder mixes. Specifications

GOST 34277-2017: Materials and systems for the protection and repair of concrete structures. Requirements for anchoring compositions and adhesion-strength fastenings of reinforcement elements

GOST 34885-2022: System of dry construction waterproofing mixtures based on cement binder for sealing static joints (cracks) in building structures. Technical conditions

GOST R 54358-2011: Dry cement base decorative coats for facade’s thermal insulation composite systems with external mortar’s lays. Specifications

GOST R 54358-2017: Dry cement base decorative coats for faзade’s thermo insulation composite systems with external plaster lays. Specifications

GOST R 54359-2011: Dry cement base adhesives, base coats and patching putties for facade’s thermo insulation composite systems with external mortar’s lays. Specifications

GOST R 54359-2017: Dry cement base decorative coats for faзade’s thermo insulation composite systems with external plaster lays. Specifications

GOST R 55818-2013: Polymer base decorative coats for facade’s thermal insulation composite systems with external mortar's lays. Specifications

GOST R 55818-2018: Polymer base decorative coats for faсade’s thermo-insulation composite systems with external mortar’s lays. Specifications

GOST R 55936-2014: Polymer-cement base adhesives, base coats and patching putties for facade’s thermal insulation composite systems with external mortar’s lays. Specifications

GOST R 55936-2018: Polymer-cement base adhesives, base coats and patching putties for faсade’s thermo insulation composite systems with external plaster lays. Specifications

GOST R 56378-2015: Materials and systems for the protection and repair of concrete structures. Requirements for products repair and bond connections for rehabilitation of structures

GOST R 56387-2015: Dry-mix cement based adhesives for tiles. Specifications

GOST R 56387-2018: Dry construction glue mixtures on cement binder. Technical conditions

GOST R 56686-2015: Dry construction plaster mixes based on cement binder with use of ceramsite sand. Specifications

GOST R 56703-2015: Dry building in-depth waterproofing capillary mixes based on cement binder. Specifications

GOST R 57796-2017: Dry building mixes on cement binder with use of ceramsite sand for mortars. Specifications

GOST R 58211-2018: Adhesives for floor coverings. General specifications

GOST R 58271-2018: Dry rubbing mixes. Technical conditions

GOST R 58272-2018: Dry building masonry mixes. Technical conditions

ODM 218.2.014-2011: Guidelines for the use of steel-fiber-concrete in the repair of bridge structures

ODM 218.2.023-2012: Recommendations for the use of fast-hardening materials for the repair of cement concrete pavements

SP 435.1325800.2018: Monolithic concrete and reinforced concrete structures. Rules for the production and acceptance of work

STO DOKTOR BETON 68686983-001-2011: Dry building mixtures trade mark "ДОКТОР БЕТОН®" for waterproofing and repair concrete construction. Classification. Nomenclature of indicators. Technical requirements

STO DOKTOR BETON 68686983-002-2011: Dry building mixtures trade mark "ДОКТОР БЕТОН®" for waterproofing and repair concrete construction. Technical specifications and quality characteristics

STO DOKTOR BETON 68686983-003-2011: Dry building mixtures trade mark "ДОКТОР БЕТОН®" for waterproofing and repair concrete construction. Technologies execution and methods estimation of quality

TR 217-2011: Technical recommendations on the technology of waterproofing works using the materials of the "Antihydron" complex during the construction of underground parts of buildings and structures

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Building materials. Methods for combustibility test
Language: English
Price: $162.00
imgalt
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English
Price: $745.00
imgalt
Building materials spread flame test method
Language: English
Price: $147.00
imgalt
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English
Price: $349.00
imgalt
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $549.00
imgalt
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English
Price: $414.00
imgalt
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English
Price: $700.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!