GOST 31559-2012

ГОСТ 31559-2012

Anchor supports. General pecifications

Крепи анкерные. Общие технические условия

Status: Effective - Introduced for the first time. IUS 10-2013

This standard applies to anchor lining (hereinafter - lining) with the anchors secured in the wells mechanically with wedge-shaped locks by frictional interaction, chemically or fast-hardening materials (compositions) in rocks and coal seams with a uniaxial compression strength of at least 25 MPa used for fastening preparatory (including cuttings, split, coal-fired furnaces, etc.), capital and sewage mining. The standard does not apply to lining with screw, explosive and hydraulic fastening anchors in wells, as well as lining made of wood. This standard establishes the technical requirements for supports, the rules of acceptance and methods for monitoring indicators in their manufacture.

Настоящий стандарт распространяется на анкерные крепи (далее - крепи) с закреплением анкеров в скважинах механическим способом клинораспорными замками фрикционным взаимодействием, химическим способом или быстротвердеющими материалами (составами) в породах и угольных пластах с прочностью на одноосное сжатие соответственно не менее 25 МПа, применяемые для крепления подготовительных (в том числе просеков, разрезных, углеспускных печей и др.), капитальных и очистных горных выработок. Стандарт не распространяется на крепи с винтовым, взрывным и гидравлическим закреплением анкеров в скважинах, а также на крепи, изготовленные из дерева. Настоящий стандарт устанавливает технические требования для крепей, правила приемки и методы контроля показателей при их изготовлении

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 16

Approved: Federal Agency for Technical Regulation and Metrology, 11/22/2012

SKU: RUSS63790

Price: $244.44




The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 73 Mining and minerals »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.13 Testing and control of products of engineering industry » 4.13.2 Machines and equipment for special purposes » 4.13.2.4 Machines and equipment for mining, oil industry and quarrying »

ISO classifier » 73 MINING AND MINERAL PRODUCTS » 73.100 Mining equipment » 73.100.10 Equipment for heading and installation of tubing lining »

National standards » 73 MINING AND MINERAL PRODUCTS » 73.100 Mining equipment » 73.100.10 Equipment for heading and installation of tubing lining »

National Standards for KGS (State Standards Classification) » Latest edition » G Machines, equipment and tools » G4 Machinery and equipment for heavy industry » G41 Exploration, mining and mineral processing equipment »


The Document References:

GOST 1.0-92: State System for Standardization of Russian Federation. Basic principles

GOST 1.2-2009: Interstate system for standardization. Interstate standards, rules and recommendations on interstate standardization. Rules for development, taking over, application, renovation and cancellation

GOST 1033-79: Fatty cup grease. Specifications

GOST 10354-82: Polyethylene film Specifications

GOST 12.3.009-76: Occupational safety standards system. Loading and unloading works General safety requirements

GOST 14192-96: Cargo marking

GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence

GOST 15526-70: Hexagon nuts, product grade C. Construction and dimensions

GOST 15846-2002: Production for transportation to the areas of Far North and similar regions. Packing, marking, transportation and storage

GOST 166-89: Vernier callipers. Specifications

GOST 18321-73: Statistical quality control. Item random sampling methods

GOST 2.102-2013: Unified system for design documentation. Types and sets of design documentation

GOST 2.114-95: Unified system for design documentation. Specifications

GOST 2.601-2013: Unified system for design documentation. Exploitative documents

GOST 2.602-2013: Unified system for design documentation. Repair documents

GOST 20799-88: Industrial oils Specifications

GOST 24297-2013: Verification of purchased product. Organization and methods of control

GOST 27.002-89: Industrial product dependability. General principles. Terms and definitions

GOST 2991-85: Wooden uncollapsible cases for weights up to 500 kg. General specifications

GOST 3282-74: General-purpose low-carbon steel wire. Specifications

GOST 3749-77: Checking 90° squares. Specifications

GOST 380-2005: Common quality carbon steel. Grades

GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications

GOST 535-2005: Common quality carbon steel bar and shaped sections. General specifications

GOST 5781-82: Hot-rolled steel for reinforcement of ferroconcrete structures. Specifications

GOST 5915-70: Hexagon nuts, product grade B. Construction and dimensions

GOST 7502-98: Measuring metal tapes. Specifications

GOST 9.014-78: Unified system of corrosion and ageing protection. Temporary corrosion protection of products. General requirements

GOST 9.908-85: Unified system of corrosion and ageing protection. Metals and alloys. Methods for determination of corrosion and corrosion resistance indices

GOST R 52042-2003: Anchor supports. General specifications

GOST R 53228-2008: Non-automatic weighing instruments. Part 1. Metrological and technical requirements. Tests

PB 05-618-03: Coal Mine Safety Regulations

PR 50.2.006-94: Procedure for calibration of measurement equipment

SP 28.13330.2012: Corrosion protection of buildings structures. Updated living edition of SNiP 2.03.11-85

The Document is Referenced By:

GOST R 56613-2015: Production of non-combustible and rotting modified wood. Specifications

GOST R 58199-2018: Mining equipment. Anchor bolt of composite materials. General specifications

Order 610: Federal norms and rules in the field of industrial safety "Instructions for the calculation and use of roof bolting in coal mines"

Customers Who Viewed This Item Also Viewed:

Electromagnetic compatibility of technical equipment. Immunity of equipment for general lighting purposes to electromagnetic disturbance. Requirements and test methods
Language: English
Price: $218.25
Unified system for design documentation. Exploitative documents
Language: English
Price: $150.48
Еlectromagnetic compatibility of technical equipment. Harmonic current emissions (equipment input current <= 16 A per phase). Limits and test methods
Language: English
Price: $410.31
Еlectromagnetic compatibility of technical equipment. Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems. Equipment with rated current <= 16 A and not subject to conditional connection. Limits and test methods
Language: English
Price: $359.87
Pipeline valves. General safety requirements
Language: English
Price: $213.84
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
Language: English
Price: $714.89
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $108.90
Obosnovanie bezopasnosti oborudovaniya. Rekomendatsii po podgotovke
Language: English
Price: $67.32
Aviation turbine fuels. Determination of lubricity by the ball-on-cylinder lubricity evaluator (BOCLE)
Language: English
Price: $309.43
Aviation turbine fuel. Determination of acidity
Language: English
Price: $218.25
Petroleum products. Determination of color by Saybolt chromometer
Language: English
Price: $218.25
Passenger cars on locomotive traction. Requirements for structural strength and dynamic qualities
Language: English
Price: $595.58
Aviation fuels. Calculating net calorific value
Language: English
Price: $179.45
Aviation fuels. Calculating net calorific value
Language: English
Price: $192.06
Conformity assessment system for the use of nuclear energy. Personnel in the non-destructive and destructive testing of metal. Requirements and qualification procedure Дата введения в действие 15.03.2018
Language: English
Price: $207.90
Security of Financial (banking) Operations. Information Protection of Financial Organizations. Basic Set of Organizational and Technical Measures
Language: English
Price: $843.90
Construction in seismic regions of Ukraine
Language: English
Price: $5,909.85
Aviation turbine fuels and kerosine. Determination of smoke point
Language: English
Price: $270.63
Distillate fuels. Determination of free water and particulate contamination by visual inspection method
Language: English
Price: $165.87
Unified system of corrosion and ageing protection. Paint coatings. Groups of operation conditions
Language: English
Price: $158.40

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!