GOST 7313-75
ГОСТ 7313-75
|
|
Enamels ХВ-785 and lacquer XB-784. Specifications
Эмали ХВ-785 и лак ХВ-784. Технические условия
Status: Effective - Supersedes. The limitation of effectiveness has been lifted: Protocol No. 5-94 of the IGU dated 05.17.94 (IUS 11-12-1994)
The standard applies to XB-785 enamels and XB-784 lacquer.
Стандарт распространяется на на эмали ХВ-785и лак ХВ-784.
Choose Language:
Format: Electronic (pdf/doc)
Approved: State Committee of Standards of the Council of Ministers of the USSR,
2/10/1975
SKU: RUSS63891
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
87 Paint and varnish industry »
Standards for pipe fittings (TPA) »
9. Materials for piping valves (TPA) »
9.6 Coating Materials »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.9 Testing and control of chemical and industrial products »
4.9.3 Products of paint and varnish industry »
ISO classifier »
87 PAINT AND VARNISHING INDUSTRY »
87.040 Paints and varnishes »
National standards »
87 PAINT AND VARNISHING INDUSTRY »
87.040 Paints and varnishes »
National Standards for KGS (State Standards Classification) »
Latest edition »
L Chemical products and rubber-asbestos products »
L2 Organic Chemical Products »
L24 Varnish and enamel »
As a Replacement Of:
GOST 7313-55: Primer, enamel and varnish of perchlorovinyl, chemically resistant
The Document References:
GOST 12.1.004-91: Fire safety. General requirements
GOST 12.1.005-88: General sanitary requirements for working zone air
GOST 12.1.007-76: Noxious substances. Classification and general safety requirements
GOST 12.3.002-75: Occupational safety standards system. Manufacturing processes. General safety requirements
GOST 12.3.005-75: Painting works
GOST 12.4.009-83: Fire-fighting equipment for protection of units. Basic types. Location and maintenance
GOST 12.4.011-89: Occupational safety standards system. Means of protection. General requirements and classification
GOST 12.4.021-75: Ventilation systems. General requirements
GOST 12.4.068-79: Occupational safety standards system. Dermatologic personal safety means. Classification and general requirements
GOST 12.4.103-83: Occupational safety standards system. Special protective clothes, personal means of hand and legs protections. Classification
GOST 13345-85: Tin-plate and black plate
GOST 14192-96: Cargo marking
GOST 15140-78: Paintwork materials. Methods for determination of adhesion
GOST 16523-97: Rolled sheets from quality and ordinary carbon steel for general purposes. Specifications
GOST 17.2.3.02-78: Regulations for establishing permissible emissions of noxious pollutants from industrial enterprises
GOST 17537-72: Paint materials. Methods for the determination of the content of volatile and non-volatile matters, hard and film-forming materials
GOST 19007-73: Paintwork materials. Method for determination of drying time and degree
GOST 19266-79: Paintwork materials. Methods of colour determination
GOST 19433-88: Dangerous goods. Classification and marking
GOST 23343-78: Primer ГФ-0119. Specifications
GOST 23494-79: Primer XC-059, enamels XC-759, varnish XC-724. Specifications
GOST 2590-88: Round steel bars. Dimensions
GOST 2768-84: Acetone technical. Specifications
GOST 3118-77: Reagents. Hydrochloric acid. Specifications
GOST 4204-77: Reagents. Sulphuric acid. Specifications
GOST 4328-77: Reagents. Sodium hydroxide. Specifications
GOST 4404-78: Graphite for manufacture of slate-pencils. Technical requirements
GOST 5233-89: Paint materials. Method for determination of coating hardness pendulum instrument
GOST 6589-74: Paintwork materials. Method for determination of grind degree by grindmeter 'Klin'
GOST 6613-86: Square meshed woven wire gauzes
GOST 6806-73: Paint and lacquer materials. Method for determination of film elasticity in bending
GOST 7827-74: Solvents of grades P-4, P-4A, P-5, P-5A, P-12 for paint materials. Specifications
GOST 8420-74: Paint and lacquer materials. Method for determination of relative viscosity
GOST 8784-75: Paint materials. Methods for determination of hiding power
GOST 8832-76: Paintwork materials. Methods for formation of paint coating for testing
GOST 9.403-80: Unified system of corrosion and ageing protection. Paint coatings. Test methods for resistance to liquid static effect
GOST 9109-81: Primers ФЛ-03k and ФЛ-03Ж. Specifications
GOST 9980.1-86: Paint materials. Rules of acceptance
GOST 9980.2-86: Paint materials. Test sampling
GOST 9980.3-86: Paint materials. Packing
GOST 9980.4-2002: Paint materials. Marking
GOST 9980.4-86: Paint materials. Marking
GOST 9980.5-86: Paint materials. Transportation and storage
The Document is Referenced By:
GOST 11125-84: Super pure nitric acid. Specifications
GOST 12257-93: Sodium chlorate technical. Technical conditions
GOST 12549-2003: Passenger cars of 1520 mm gauge main-line railways. Painting. Specifications
GOST 13354-91: Gated wooden patterns. Specifications
GOST 13758-89: Agricultural machinery. Drive shafts. Specifications
GOST 18128-2018: Timber framed asbestos cement exterior wall panels supplied with insulation. Specifications
GOST 18128-82: Timber framed asbestos cement exterior wall panels supplied with insulation. Specifications
GOST 18325-80: Laboratory furniture for operation with radioactive substances. General requirements
GOST 22406-77: Timber elements and products for building. Method of determining conditional water permeability of water protecting finishes and impregnating compounds
GOST 22896-77: Paint coatings for electric locomotives of 1520 mm gauge main line railways. Specifications
GOST 22947-78: Paint coatings for diesel locomotives of 1520 mm gauge main line railways. Specifications
GOST 23846-79: Refrigerator cores for main railways of 1520 (1524) mm gauge. Paint coatings. Specifications
GOST 23852-79: Coatings of lacquers and paints. General requirements for choice by decorative properties
GOST 25130-82: Luminescent fire protective wood coating. Technical requirements
GOST 25131-82: Luminescent fire protective steel coating. Technical requirements
GOST 26155-84: Barrels from corrosion-resistant steel
GOST 30765-2001: Metal transport packagings. General specifications
GOST 31365-2008: Paint coatings electrolocomotives and diesellocomotives of 1520 mm gauge mainline railways. Specifications
GOST 31384-2008: Structural concrete protection against corrosion. General requirements
GOST 6572-91: Paint Coatings Of Tractors And Agricultural Machinery General Specifications
GOST 7409-2009: Freight cars. Requirements to paint coatings
GOST 7409-90: Main line freight cars for 1520 mm gauge. Specifications for the development of paint coating technologies
GOST 9.074-77: Unified corrosion and ageing protection system. Coatings for paintwork intended for use in areas with moderate climate. General technical requirements and methods of accelerated testing
GOST 9.083-78: Unified system of corrosion and ageing protection. Paint coatings. Accelerated test methods for durability in liquid corrosive mediums
GOST 9.309-86: Unified system of corrosion and ageing protection. Galvanic coating. Designation of dispersing ability of electrolytes during the creation of coverings
GOST 9.401-2018: Unified system of corrosion and ageing protection. Paint coatings. General requirements and methods of accelerated tests on resistance to the influence of climatic factors
GOST 9.401-79: Unified system of protection against corrosion. Coatings for paintwork intended for use in areas with tropical climate. General technical requirements and methods of accelerated testing
GOST 9.401-89: Unified corrosion and ageing protection system. Coatings for paintwork intended for use in areas with tropical climate. General requirements and methods of accelerated testing
GOST 9.401-91: Unified system of corrosion and ageing protection. Paint coatings. General requirements and methods of accelerated tests on resistance to the action of climatic factors.
GOST 9.404-81: Unified corrosion and ageing protection system. Coatings for paintwork intended for use in areas with cold climate. General requirements and methods of accelerated testing
GOST R 54893-2012: Passenger cars on locomotive traction and motor-cars. Lacquer and antidischarge coating reguirements.
GOST R 56963-2016: Locomotives. Lacquer and antidischarge coating requirements and methods of their control
GOST R 8.729-2010: State system for ensuring the uniformity of measurements. Analytical gas laboratory chromatographs. Verification procedure
IM 4-12-95: Automation systems. Handbook of materials. Part 1. Basic materials
Manual for SNiP 2.03.11-85: A manual for monitoring the state of building metal structures of buildings and structures in aggressive environments, conducting surveys and designing the restoration of corrosion protection of structures
Manual for SNiP 2.03.11-85: Designer's Guide to Corrosion Protection for Concrete and Reinforced Concrete Structures
Manual for SNiP 2.03.11-85: Manual on the design of corrosion protection for stone, reinforced stone and asbestos-cement structures
Manual for SNiP 3.05.01-85: Manual for the production and acceptance of work when installing ventilation and air conditioning systems
MU 34-70-106-85: Procedural Guidelines for Preservation of Standby Equipment of Stationary Electric Power Generating Stations
ODM 218.2.001-2009: Recommendations for the design and construction of culverts of metal corrugated structures on public roads, taking into account regional conditions (road-climatic zones)
OST 26.260.18-2004: Process modules for oil and gas industry. General technical specifications
OST 26-07-2071-87: Pipeline fittings from steel resistant to sulphide corrosion cracking. General specifications.
OST 34-29-566-82: Protective coating for steel structures and items of high-voltage substation overhead power line supports and open junction boxes by hot tinning method. Acceptance rules and inspection methods.
OST 34-29-582-82: Protective coating for steel structures of high-voltage substation overhead power line supports and open junction boxes by hot tinning method. Technical requirements. Acceptance rules and inspection methods.
OST 45.85-96: Wooden and metal shelf stands for electric power storages applied by telecommunication enterprises. General requirements.
OST 5R.9527-94: Pipes and products of general purpose marine systems. Cleaning and preservation (before installation). Typical processes.
R 50-127-92: Recommendations. The designs are the basic carriers of radio-electronic means. Restrictive list of types of coatings
RD 153-34.1-40.504-00: Procedural Guidelines for Optimal Corrosion Protection of Storage Tanks and Protection of the Water in Them Against Aeration
RD 24.202.03-90: Weatherproof lacquer coating for oil and gas processing equipment. Technical requirements.
RD 302-07-16-91: General purpose pipeline valves. Paint coatings. General technical conditions
RD 31.35.01-80: Guidelines for corrosion protection of marine port facilities designed for handling chemicals. Minmorflot, Soyuzmorniiproekt, 1980
RD 34.21.662-84: Typical instructions for painting metal poles of power lines using a rust converter
RD 34.26.203: Guidelines for Brick Lining Work During Installation of Boiler Plants and Energy Facilities
RD 34.27.201: Technical Requirements for the Fabrication, Installation, and Corrosion Protection of Ash Collector with Venturi Tube Type MV
Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope
RM 4-150-92: Process automation systems. Integrated norms of consumption of materials and products
RM 4-206-95: Automation systems. Specification of equipment, products and materials. Directions for implementation. Allowance to GOST 21.110-95
RM 4-246-91: Automation systems. General requirements for CAD
RM 4-264-92: Automation systems. Recommendations for the design of steel structures for wiring and installation of automation equipment
SN 277-80: Guidelines for the Fabrication of Cellular Concrete Products
SNiP 2.03.11-85: Corrosion protection of buildings structures
SNiP II-26-76: Roofing
SNiP II-45-75: Main pipelines
ST TsKBA 052-2008: Pipe fittings. Requirements for materials of fittings used for hydrogen sulfide environments
ST TsKBA 079-2010: General purpose pipeline valves. Paint coatings. General technical conditions
VSN 370-93: Instructions for the installation of electrical wiring in pipes
Customers Who Viewed This Item Also Viewed:
 |
Building materials. Methods for combustibility test
Language: English |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Building materials spread flame test method
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.