GOST R 12.4.199-99
ГОСТ Р 12.4.199-99
|
|
Occupational safety standards system. Materials for personal protection equipment with rubber-or plastics-coated fabrics. Methods for determination of resistance to damage by flexing
Система стандартов безопасности труда. Материалы для средств индивидуальной защиты с резиновым или пластмассовым покрытием. Методы определения сопротивления на изгиб
Status: Effective - Introduced for the first time. IUS 6-2000
This standard establishes methods for evaluating the bending resistance of materials with a polymer coating. This standard applies to rubber or plastic coated materials (artificial leather and rubberized fabrics) for the manufacture of personal protective equipment.
Настоящий стандарт устанавливает методы оценки сопротивления на изгиб материалов с полимерным покрытием. Настоящий стандарт распространяется на материалы с резиновым или пластмассовым покрытием (искусственные кожи и прорезиненные ткани), предназначенные для изготовления средств индивидуальной защиты
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstandart of Russia,
12/28/1999
SKU: RUSS63985
The Product is Contained in the Following Classifiers:
Evidence base (TR CU, Technical Regulation of the Customs Union) »
019/2011 TR CU. On safety of personal protective equipment »
Regulations and standards (to ТР ТС 019/2011) »
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
II Industrial sanitation and occupational health »
8 Personal protective equipment »
8.1 Insulating suits »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.5 Testing and control of light industry products »
4.5.1 Textile Industry Products »
ISO classifier »
59 TEXTILE AND LEATHER PRODUCTION »
59.080 Textile products »
59.080.40 Coated Fabrics »
National standards »
59 TEXTILE AND LEATHER PRODUCTION »
59.080 Textile products »
59.080.40 Coated Fabrics »
National Standards for KGS (State Standards Classification) »
Latest edition »
L Chemical products and rubber-asbestos products »
L6 Rubber and asbestos products »
L69 Test methods. Packaging. Marking »
National Standards for OKSTU »
RUBBER AND ASBESTOS PRODUCTS »
Rubberized fabrics »
The Document References:
GOST 12.4.102-80: Safety standards system. Materials for special foot-wear uppers. Determination of liquid aggressive material permeability
GOST 12.4.129-83: System of safety standards. Materials for special foot-wear uppers. Method for determination of petrolеum and petrolеum products penetration
GOST 12.4.147-84: Occupational safety standards system. Artificial leather for hand protection means. Method for determination of acid and alkali permeability
GOST 12.4.149-84: Occupational safety standards system. Materials for special foot-wear uppers. Method for determination of organic solvent permeability
GOST 17073-71: Artificial leather. Methods for the determination of thickness and mass of 1 sq m
GOST 17316-71: Artificial leather. Measuring method of tearing load and elongation of break
GOST 19616-74: Weaving and knitted fabrics. A method for evaluating the specific surface resistance
GOST 22944-78: Artificial leather and film materials. Method for the determination of water penetrability
GOST 27708-88: Decontaminable protective polymeric materials and coatings. Method for testing the ease of decontamination
GOST 413-91: Rubber or plastics-coated fabrics. Determination of resistance to penetration by water
GOST 6709-72: Distilled water. Specifications
GOST 8973-77: Artificial leather. Method for the determination of air penetrability
GOST 8978-75: Artificial leather and films. Methods of determination of stability of repeated flexing
The Document is Referenced By:
Decision 30: On approval of the list of products in respect of which the customs declaration is accompanied by a document about the conformity assessment requirements of the technical regulations of the Customs Union "On safety of agricultural and forestry tractors and trailers to them" (TR TS 031/2012) (as amended on March 21, 2017)
Decision 30: On the list of international and regional (interstate) standards, and in their absence - national (state) standards, resulting in voluntary compliance with the requirements of technical regulations of the Customs Union "On Personal Protective Equipment Safety" (TR CU 019/2011), and the list of international and regional (interstate) standards, and in their absence - national (state) standards, containing rules and methods of research (tests) and measurements, including
GOST R 12.4.219-99: Occupational safety standards system. High-visibility warning clothing. Technical requirements
GOST R 12.4.256-2011: Occupational safety standards system. Protective clothing against toxic chemicals in the form of gas and vapours. Technical requirements and test methods
GOST R 12.4.258-2011: Occupational safety standards system. Protective clothing against liquid chemicals. Performance requirements for liquid tight or spray-tight clothing (Types 3 and 4). Technical requirements
GOST R 12.4.259-2011: Occupational safety standards system. Ventilated and non-ventilated «gas-tight» (Type 1) and «non-gas-tight» (Type 2) chemical protective suits. Technical requirements
GOST R 12.4.264-2012: Occupational safety standards system. Protective clothing against chemicals. Classification, technical requirements, test methods and labelling
GOST R EN 511-2010: Occupational safety standards system. Personal protective means of hands. Protective gloves against cold. General technical requirements. Test methods
|
Customers Who Viewed This Item Also Viewed:
 |
Jet fuels
Language: English |
State system for ensuring the uniformity of measurements. Measurements of liquids and gases flow rate and quantity by means of orifice instruments. Part 5. Measurement procedure
Language: English |
Molded parts of coupler and automatic coupler devices of railway rolling stock. General specifications.
Language: English |
Main-line diesel locomotives. General technical requirements.
Language: English |
Four-wheel bogies of freight cars for mainline railways gauge 1520 (1524) mm. Specifications
Language: English |
Technical ethylcellosolve. Specifications
Language: English |
Automatic coupler model SA-3 and its components. Design and dimensions
Language: English |
Railway rolling stock. Devices to prevent running gear parts from dropping to the track. Methods of controlling strength characteristics
Language: English |
Electric heating devices for heating rolling stock railways. Safety requirements and test methods
Language: English |
Ice cream. General technical requirements
Language: English |
Welded joints in steel structures of railway rolling stock. Requirements for design, implementation and quality control
Language: English |
Locomotives The method of dynamic strength tests
Language: English |
Railway rolling stock. Norms for permissible exposure of railway track and test methods
Language: English |
Locomotives. Requirements for strength and dynamic qualities
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
