GOST R 52436-2005
ГОСТ Р 52436-2005
|
|
Control equipment of intruder and intruder-fire alarm systems. Classification. General technical requirements and test methods
Приборы приемно-контрольные охранной и охранно-пожарной сигнализации. Классификация. Общие технические требования и методы испытаний
Status: Effective - Introduced for the first time
This standard applies to receiving and control devices of security and fire alarm systems designed to work as part of the security and fire alarm systems according to GOST R 50775 and establishes the classification, general technical requirements and test methods of devices. The requirements for fire alarm control panels and their test methods apply only to security alarm functions. The standard does not apply to devices for special purposes, as well as devices designed to work in hazardous areas.
Настоящий стандарт распространяется на приемно-контрольные приборы охранной и охранно-пожарной сигнализации, предназначенные для работы в составе систем охранной и охранно-пожарной сигнализации по ГОСТ Р 50775 и устанавливает классификацию, общие технические требования и методы испытаний приборов. Требования к приемно-контрольным приборам охранно-пожарной сигнализации и методы их испытаний распространяются только на функции охранной сигнализации. Стандарт не распространяется на приборы специального назначения, а также на приборы, предназначенные для работы во взрывоопасных помещениях
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
12/28/2005
SKU: RUSS64111
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
13 Environmental protection, protection of people from environmental exposure. Security »
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
IV Fire safety »
3 Fire safety equipment »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.15 Testing and control of products of electronic, optical and electrical industry »
4.15.4 Means of measurement, control, management and testing »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
3 Activities of testing laboratories »
3.2 Technical equipment of testing laboratories »
3.2.2 Measuring instruments and test equipment »
3.2.2.8 Regulation, automatics and telemechanics »
ISO classifier »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.320 Alarm and warning systems »
National standards »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.320 Alarm and warning systems »
National Standards for KGS (State Standards Classification) »
Latest edition »
P Measuring devices. Automation and computing facilities »
P7 Regulation, automatics and telemechanics »
P77 Devices and equipment for telemetry, telecontrol and telealarm »
The Document is Replaced With:
GOST R 52436-2024: Receiving and controlling security devices. Classification. General technical requirements and test methods
The Document References:
Federal Law 184-FZ: About technical regulation
GOST 12.1.004-91: Fire safety. General requirements
GOST 12.1.006-84: Occupational safety standards system. Electromagnetic fields of radio frequencies. Permissible levels at work-places and requirements for control
GOST 12.1.019-79: Occupational safety standards system. Electric safety. General requirements and nomenclature of kinds of protection
GOST 12.1.030-81: Electrical safety protective grounding, neutral grounding
GOST 12.2.003-91: Industrial equipment. General safety requirements
GOST 12.2.007.0-75: Occupation safety standards system Electrical equipment. General safety requirements
GOST 12997-84: SSI Products. General specifications
GOST 14192-96: Cargo marking
GOST 14254-96: Degrees of protection provided by enclosures (IP Code)
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 23170-78: Packing for products of engineering industry. General requirements.
GOST 26342-84: Means of alarm, fire and alarm-fire systems. Types, basic parameters and dimensions.
GOST 26828-86: Instrumentation and machine building products. Marking
GOST 27.002-89: Industrial product dependability. General principles. Terms and definitions
GOST 27.003-90: Reliability in engineering. Make-up and general rules for assigning reliability requirements
GOST 27.410-87: Industrial product dependability. Inspection methods of reliability indices and plans of check tests on reliability
GOST 9.014-78: Unified system of corrosion and ageing protection. Temporary corrosion protection of products. General requirements
GOST R 1.0-2004: Standardization in the Russian Federation. Basic provisions
GOST R 50009-2000: Electromagnetic compatibility of technical equipment. Components of intruder alarm systems. Requirement and test methods
GOST R 50775-95: Alarm systems. Part 1. General requirements. Section 1. General
GOST R 51089-97: Control, indicating receiving and operating equipment. General technical requirements. Test methods
GOST R 51241-98: Access control systems and units. Classification. General requirements. Methods of tests
GOST R 51317.2.5-2000: Electromagnetic compatibility of technical equipment. Electromagnetic environment. Classification of electromagnetic disturbances for different locations of technical equipment
GOST R 51317.6.1-99: Electromagnetic compatibility of technical equipment. Immunity of technical equipment intended for use in residential, commercial and light-industry environments. Requirements and test methods
GOST R 51317.6.2-99: Electromagnetic compatibility of technical equipment. Immunity of technical equipment intended for use in industry environments. Requirements and test methods
GOST R 51699-2000: Electromagnetic compatibility of technical equipment. Immunity to electromagnetic disturbances of components of intruder alarm systems. Requirements and test methods
GOST R 8.568-97: State system for ensuring the uniformity of measurements. Verification of testing equipment. General principles
GOST R IEC 60065-2002: Audio-, video- and similar electronic apparatus. Safety requirements
NPB 58-97: Address fire alarm systems. General technical requirements. Test methods
NPB 75-98: Control, indicating, receiving and operating equipment. General technical requirements. Test methods
The Document is Referenced By:
GOST R 50776-95: Alarm systems. Part 1. General requirements. Section 4. Code of practice
GOST R 51241-2008: Access control units and systems. Classification. General technical requirements. Test methods
GOST R 52435-2015: Alarm intruder technical means. Classification. General technical requirements and test methods
GOST R 52551-2006: Guard and security systems. Terms and definitions
GOST R 52551-2016: Protection and security systems. Terms and definitions
GOST R 53704-2009: Complex and integrated security systems. General technical requirements
GOST R 54101-2010: Means of automation and control systems. Means and systems of safety. Service and regular maintenance
GOST R 54126-2010: Warning devices for intruder alarm systems. Classification. General technical requirements and test methods
GOST R 54832-2011: Alarms are guarding point magnetic contact. General requirements and test methods
GOST R 55435-2013: Oil and oil products trunk pipeline transportation. Operation and maintenance. General principles
GOST R 56102.2-2015: Centralized security monitoring systems. Part 2. Subsystem for mounting at protected facility. General technical requirements and test methods
GOST R 56677-2015: Means of physical protection engineering. Coding, identification and marking. General requirements
R 076-2018: Guidelines. False alarms of technical means of security alarms and methods of dealing with them
R 78.36.018-2011: Safety guide on nuclear energy use. Unified control procedures of base materials (semi-products), weld joints and build-ups of equipment and pipelines of nuclear energy plants. Dye penetrant inspection.
SP 239.1326000.2015: Systems of informing, annunciator and park communication on railway transport
SP 350.1326000.2018: Norms for technological design of sea ports
Customers Who Viewed This Item Also Viewed:
 |
Unified system for design documentation. Types and sets of design documentation
Language: English |
Loads and impacts
Language: English |
Vessels and Apparatus. Norms and methods of strength calculation from wind loads, seismic influence and other external loads
Language: English |
Articulated connector devices with cast male and female parts for freight cars of articulated type. General technical specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.