imgalt

GOST R 52664-2010

ГОСТ Р 52664-2010

Welded pipe sheet piles. Specifications

Шпунт трубчатый сварной. Технические условия

Status: Effective

This standard applies to welded tubular grooves intended for use in hydraulic, transport and civil engineering in the structures of the sheet walls of capital and temporary structures built in all climatic areas of construction [1]

Настоящий стандарт распространяется на шпунт трубчатый сварной, предназначенный для применения в гидротехническом, транспортном и промышленно-гражданском строительстве в конструкциях шпунтовых стен капитальных и временных сооружений, возводимых во всех климатических районах строительства [1]

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Federal Agency for Technical Regulation and Metrology, 12/23/2010

SKU: RUSS64124

Price: $333.00



imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Regulations » Documents System of normative documents in construction » 5. Regulatory documents for building structures and products » K.53 Metal structures »

Welding regulations » Welding work »

Welding regulations » Main materials »

Welding regulations » Pipelines »

Welding regulations » Metal structures »

Welding regulations » Welding materials »

Welding regulations » Documentation »

Welding regulations » Non-destructive control »

Welding regulations » Mechanical Testing »

Welding regulations » Defects »

Welding regulations » Welding work » Manual welding »

Welding regulations » Welding work » Mechanized welding »

Welding regulations » Welding work » Automatic welding »

Welding regulations » Welding work » Surfacing »

Welding regulations » Welding work » Dusting »

Welding regulations » Main materials » Steel, cast iron »

Welding regulations » Welding materials » Electrodes »

Welding regulations » Welding materials » Fluxes »

Welding regulations » Welding materials » Gases »

ISO classifier » 91 CONSTRUCTION MATERIALS AND CONSTRUCTION » 91.080 Structures of buildings » 91.080.10 Metal constructions »

National standards » 91 CONSTRUCTION MATERIALS AND CONSTRUCTION » 91.080 Structures of buildings » 91.080.10 Metal constructions »

National Standards for KGS (State Standards Classification) » Latest edition » T General technical and organizational and methodological standards » T3 Physics and Mechanics » T34 Oscillatory and wave-like movements. Bodies vibration. Sound. Acoustics »


As a Replacement Of:

GOST R 52664-2006: Welded pipe sheet piles. General specifications

The Document References:

GOST 5264-80: Manual arc welding. Welding joints. Main types, design elements and dimensions

Federal Law 184-FZ: About technical regulation

GOST 10157-79: Gaseous and liquid argon. Specifications

GOST 1050-88: Carbon structural quality steel gauged bars with special surface finish. General specifications

GOST 10704-91: Electrically welded steel line-weld lubes. Range

GOST 10705-80: Electrically welded steel tubes. Specifications

GOST 10706-76: Electrically welded steel line-weld tubes. Technical requirements

GOST 11358-89: Dial-type thickness gauges and dial-type wall thickness gauges graduated in 0,01 and 0,1 mm. Specifications

GOST 12344-2003: Alloyed and high-alloyed steels. Methods for determination of carbon

GOST 12345-2001: Alloyed and high-alloyed steels. Methods of sulphur determination

GOST 12346-78: Alloyed and high-alloyed steels. Methods of silicon determination

GOST 12347-77: Alloyed and high-alloyed steels. Methods for determination of phosphorus

GOST 12348-78: Alloyed and high-alloyed steels. Methods of manganese determination

GOST 12349-83: Alloyed and high-alloyed steels. Methods for determination of tungsten

GOST 12350-78: Alloyed and high-alloyed steels. Methods of chromium determination

GOST 12351-2003: Alloyed and highalloyed steels. Methods for determination of vanadium

GOST 12352-81: Steels alloyed and highalloyed. Methods for the determination of nickel

GOST 12354-81: Steels alloyed and highalloyed. Methods for the determination of molybdenum

GOST 12355-78: Alloyed and high-alloyed steels. Methods of copper determination

GOST 12356-81: Steels alloyed and highalloyed. Methods of the determination of titanium

GOST 12357-84: Steels alloyed and highalloyed. Methods for the, determination of aluminium

GOST 12358-2002: Alloyed and highalloyed steels. Methods for determination of arsenic

GOST 12359-99: Carbon, alloyed and high-alloyed steels. Methods for determination of nitrogen

GOST 12360-82: Steels alloyed and highalloyed. Methods for the determination of boron

GOST 12361-2002: Alloyed and highalloyed steels. Methods for determination of niobium

GOST 12362-79: Alloy and high-alloy steels. Methods for determination of stibium, lead, tin, zinc and cadmium

GOST 14771-76: Gas-shielded arc welding. Welded joints. Main types, design elements and dimensions

GOST 14782-86: Nondestructive testing. Welded joints. Ultrasonic methods

GOST 1497-84: Metals. Methods of tension test

GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence

GOST 17745-90: Steels and alloys. Methods for determination of gases

GOST 18895-97: Steel. Method of photoelectric spectral analysis

GOST 19281-89: Rolled steel with increased strength. General specifications

GOST 20295-85: Welded steel pipes for gas and oil pipelines. Technical specifications

GOST 2246-70: Welding steel wire. Specifications

GOST 22536.0-87: Carbon steel and unalloyed cast iron. General requirements for methods of analysis

GOST 23118-99: Steel construction structures General Technical Specifications

GOST 28033-89: Steel. Method of X-ray-fluorescent analysis

GOST 30432-96: Metal tubes. Selection of samples, tube stocks and specimens for mechanic and technological tests

GOST 3242-79: Welded joints

GOST 380-2005: Common quality carbon steel. Grades

GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications

GOST 6507-90: Micrometers. Specifications

GOST 6996-66: Welded joints. Methods of mechanical properties determination

GOST 7502-98: Measuring metal tapes. Specifications

GOST 7512-82: Nondestructive testing. Welded joints. Radiography method

GOST 7565-81: Iron, steel and alloys. Sampling for determination of chemical composition

GOST 8050-85: Carbon dioxide,

GOST 8713-79: Flux welding. Welded joints. Maih types design elements and dimensions

GOST 8732-78: Seamless hot-deformed steel pipes. Range of sizes

GOST 9454-78: Metals. Method for testing the impact strength at the low, room and high temperature

GOST 9466-75: Covered metal electrodes for manual arc welding of steels and deposition. Classification and general specifications

GOST 9467-75: Metal covered electrodes for manual arc welding of structural and heat-resistant steels. Types

GOST 9567-75: Precision steel tubes. Range

GOST R 1.0-2004: Standardization in the Russian Federation. Basic provisions

GOST R 52222-2004: Fused fluxes for automatic welding. Specifications

GOST R ISO 10543-99: Seamless and hot-stretch-reduced welded steel tubes for pressure purposes. Ultrasonic thickness testing

GOST R ISO 2859-1-2007: Statistical methods. Sampling procedures for inspection by attributes. Part 1. Sampling schemes indexed by acceptance quality limit for lot-by-lot inspection

SP 16.13330.2011: Steel structures

SP 53-101-98: Manufacturing and quality control of steel structures for construction

The Document is Referenced By:

ODM 218.2.090-2017: Guidelines for the use of tubular welded grooves in the construction of roads

SP 287.1325800.2016: Marine berthing facilities. Rules of design and construction

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Building materials. Methods for combustibility test
Language: English
Price: $162.00
imgalt
Building materials spread flame test method
Language: English
Price: $147.00
imgalt
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English
Price: $283.00
imgalt
Clear sheet glass. Specifications
Language: English
Price: $250.00
imgalt
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $549.00
imgalt
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English
Price: $700.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!