GOST R 53258-2009
ГОСТ Р 53258-2009
|
|
Fire equipment. The small size cylinders for apparatuses breathing and self-contained escape with compressed air. General technical requirements. Test methods
Техника пожарная. Баллоны малолитражные для аппаратов дыхательных и самоспасателей со сжатым воздухом. Общие технические требования. Методы испытаний
Status: Effective - Introduced for the first time. IUS 2-2010; Introduced with early application right
This standard applies to small-capacity cylinders with a capacity of up to 12 liters, designed for a working pressure of not more than 31 MPa (316 kgf / cm sq.) And intended for use as part of breathing apparatus with compressed air for firefighters or as part of self-rescuers. This standard establishes general technical requirements and test methods.
Настоящий стандарт распространяется на малолитражные баллоны вместимостью до 12 л, рассчитанные на рабочее давление не более 31 МПа (316 кгс/см кв.) и предназначенные для использования в составе аппаратов дыхательных со сжатым воздухом для пожарных или в составе самоспасателей. Настоящий стандарт устанавливает общие технические требования и методы испытаний
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
2/18/2009
SKU: RUSS64150
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
13 Environmental protection, protection of people from environmental exposure. Security »
Construction (Max) »
Standards »
Other state standards used in construction »
23 Hydraulic and pneumatic systems and components for general use. »
Evidence base (TR CU, Technical Regulation of the Customs Union) »
032/2013 TR CU. On safety of overpressure equipment »
Regulations and standards (to 032/2013 TR CU) »
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
IV Fire safety »
3 Fire safety equipment »
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
II Industrial sanitation and occupational health »
8 Personal protective equipment »
8.2 Respiratory, hearing protection »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.12 Testing and control of products of metallurgical industry »
4.12.6 Metal products »
ISO classifier »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.340 Protective equipment »
13.340.30 Respiratory Protection Devices »
National standards »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.340 Protective equipment »
13.340.30 Respiratory Protection Devices »
ISO classifier »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.020 Storage tanks for liquids and gases »
23.020.30 Pressure vessels, gas cylinders »
National standards »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.020 Storage tanks for liquids and gases »
23.020.30 Pressure vessels, gas cylinders »
National Standards for KGS (State Standards Classification) »
Latest edition »
T General technical and organizational and methodological standards »
T5 Documentation System »
T58 System of standards infield of nature conservation and improvement of use of natural resources, labor safety, scientific organization of labor »
The Document is Replaced With:
GOST R 53258-2019: Fire fighting equipment. Small-capacity cylinders for respiratory and self-rescuers with compressed air. General technical requirements. Test methods
The Document References:
Federal Law 184-FZ: About technical regulation
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 16504-81: The state system of testing products. Product test and quality inspection. General terms and definitions
GOST 17433-80: Industrial purity. Compressed air. Grades of contamination
GOST 2.103-68: Unified system for design documentation. Stages of designing
GOST 24997-2004: Gauges for metric thread. Tolerances
GOST 24998-81: Gauges for tapes thread of valves and gas-bags. Tolerances
GOST 4233-77: Reagents. Sodium chloride. Specifications
GOST 4784-74: Wrought aluminium and aluminium alloys. Grades
GOST 6709-72: Distilled water. Specifications
GOST 8509-93: Hot-rolled steel equal-leg angles. Dimensions
GOST 9150-2002: Basic norms of interchangeability. Metric screw threads. Profile
GOST 9150-81: Basic norms of interchangeability. Metric screw thread. Profile
GOST 9909-81: Basic norms of interchangeability. Taper screw thread of valves and gas cylinder
GOST R 1.0-2004: Standardization in the Russian Federation. Basic provisions
GOST R 15.201-2000: System of product development and launching into manufacture. Products of industrial and technical designation. Procedure of product development and launching into manufacture
The Document is Referenced By:
Decision 200: On the list of international and regional (interstate) standards, and in their absence - national (state) standards, the application of which on a voluntary basis ensures compliance with the requirements of the technical regulations of the Eurasian Economic Union "On requirements for means of fire safety and fire fighting" (TR EAEC 043/2017), and the list of international and regional (interstate) standards, and in their absence - national (state) standards, containing rules and meters
Decision 96: On the list of international and regional (interstate) standards, and in their absence - national (state) standards, the application of which on a voluntary basis to ensure compliance with the requirements of technical regulations of the Customs Union "On safety of equipment operating under excess pressure" (TR TS 032/2013), and the list of international and regional (interstate) standards, and in their absence - national (state) standards, containing rules and methods of research (tests) and
GOST R 53255-2019: Fire fighting equipment. Breathing apparatus with compressed air with an open breathing cycle. General technical requirements. Test methods
GOST R 53259-2019: Fire fighting equipment. Insulating fire self-rescuers with compressed air to protect people from toxic combustion products when rescuing from smoky rooms during a fire. General technical requirements. Test methods
GOST R 55998-2014: Petroleum and natural gas industries. Offshore production installation. Evacuation ways and temporary safe refuges. General requirements
GOST R 57308-2016: Fire equipment. Сamera protection for children for protection of the children 1, 5 years against toxic products at rescue from smoking buildings from fire. Protective devices for children for rescue of new born and small babys out of smoking areas during
GOST R 57528-2017: Equipment for diving. Diving breathing apparatus with a half breath scheme. General technical requirements
GOST R 58446-2019: Fire fighting equipment. A set of equipment to equip the personnel of the gas and smoke protection service. General technical requirements. Test methods
Order 1317: The list of documents in the field of standardization, as a result of which, on a voluntary basis, compliance with the requirements of the Federal Law of July 22, 2008 No. 123-FZ "Technical Regulations on Fire Safety Requirements" is ensured
Order 1573: The list of national standards and sets of rules, as a result of which, on a voluntary basis, compliance with the requirements of the Federal Law of July 22, 2008 No. 123-FZ "Technical Regulations on Fire Safety Requirements" is ensured
Order 832: The list of documents in the field of standardization, as a result of which, on a voluntary basis, compliance with the requirements of the Federal Law of July 22, 2008 No. 123-FZ "Technical Regulations on Fire Safety Requirements" is ensured
PO 1.3.2.13.1054-2015: The management system for the provision of personal protective equipment for employees of Rosenergoatom Concern JSC
|
Customers Who Viewed This Item Also Viewed:
 |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Unified system for design documentation. Types and sets of design documentation
Language: English |
Loads and impacts
Language: English |
High strength rolled steel. General specification
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
