GOST R 53287-2009
ГОСТ Р 53287-2009
|
|
Water and foam fire fighting systems. Fire alarm hydraulic, fire foam inducer, feeder. General technical requirements. Test methods
Установки водяного и пенного пожаротушения. Оповещатели пожарные звуковые гидравлические, дозаторы. Общие технические требования. Методы испытаний
Status: Effective - Introduced for the first time. IUS 2-2010; Introduced with early application right
This standard applies to newly developed and manufactured fire alarm sound hydraulic automatic installations of water and foam fire extinguishing, designed to notify people about the fire and the operation of the fire shut-off device; ejector-type dispensers, designed to dispense (enter) the foaming agent (additives) with a density of 1.0 to 1.2 kg / m 3. and kinematic viscosity from 40 to 200 mm sq. / s into the water flow and installed on the bypass line of the water pump in the deluge installations of foam fire extinguishing, as well as establish general technical requirements and test methods of these technical means. The standard contains mandatory requirements for product quality, the implementation of which ensures its safety for the life, health and property of the population, environmental protection
Настоящий стандарт распространяется на вновь разрабатываемые и выпускаемые оповещатели пожарные звуковые гидравлические автоматических установок водяного и пенного пожаротушения, предназначенные для оповещения людей о пожаре и о срабатывании пожарного запорного устройства; дозаторы эжекторного типа, предназначенные для дозирования (ввода) пенообразователя (добавок) с плотностью от 1,0 до 1,2 кг/м куб. и кинематической вязкостью от 40 до 200 мм кв./с в поток воды и устанавливаемые на обводной линии водяного насоса в дренчерных установках пенного пожаротушения, а также устанавливают общие технические требования и методы испытаний данных технических средств. Стандарт содержит обязательные требования к качеству продукции, выполнение которых обеспечивают ее безопасность для жизни, здоровья и имущества населения, охрану окружающей среды
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
2/18/2009
SKU: RUSS64152
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
13 Environmental protection, protection of people from environmental exposure. Security »
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
IV Fire safety »
3 Fire safety equipment »
ISO classifier »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.220 Fire protection »
13.220.10 Fire fighting »
National standards »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.220 Fire protection »
13.220.10 Fire fighting »
National Standards for KGS (State Standards Classification) »
Latest edition »
G Machines, equipment and tools »
G8 Machinery and equipment of universal application »
G88 Fire fighting vehicles, equipment and inventory »
The Document References:
Federal Law 184-FZ: About technical regulation
GOST 12.2.003-91: Industrial equipment. General safety requirements
GOST 12.2.037-78: Fire engineering. Safety requirements
GOST 12.2.047-86: Occupational safety standards system. Fire engineering. Terms and definitions
GOST 12.4.009-83: Fire-fighting equipment for protection of units. Basic types. Location and maintenance
GOST 12.4.026-76: Signal colors and safety signs
GOST 12815-80: Flanges for valves, fittings and pipelines for Pnom from 0,1 to 20 MPa (from 1 to 200 kgf/sq sm). Types. Connecting dimensions and dimensions of sealing surfaces
GOST 14192-96: Cargo marking
GOST 15.001-88: System of product development and launching into manufacture. Products of industrial and technical designation
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 1583-89: Aluminium casting alloys. Specifications
GOST 1583-93: Aluminium casting alloys. Specifications
GOST 166-89: Vernier callipers. Specifications
GOST 18321-73: Statistical quality control. Item random sampling methods
GOST 2.601-2006: Unified system for design documentation. Exploitative documents
GOST 2.601-95: Operational documents
GOST 21786-76: Man-machine system. Sound signalling devices for non-voice communication. General ergonomic requirements
GOST 23170-78: Packing for products of engineering industry. General requirements.
GOST 24054-80: Engineering and instrument production items. Leak detection methods. General requirements
GOST 24634-81: Wooden boxes for export products. General specifications
GOST 27.301-95: Dependability in techniques. Dependability prediction. Basic principles
GOST 27.410-87: Industrial product dependability. Inspection methods of reliability indices and plans of check tests on reliability
GOST 2991-85: Wooden uncollapsible cases for weights up to 500 kg. General specifications
GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications
GOST 9.014-78: Unified system of corrosion and ageing protection. Temporary corrosion protection of products. General requirements
GOST 9.032-74: Unified, system of corrosion and ageing protection. Paint coatings. Groups, technical requirements and designations
GOST 9.302-88: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. Control methods
GOST 9.303-84: Unified system of corrosion and ageing protection. Metallic and non-metallic inorganic coatings. General requirements for selection
GOST 9.308-85: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. Procedures for accelerated corrosion tests
GOST R 1.0-2004: Standardization in the Russian Federation. Basic provisions
GOST R 15.201-2000: System of product development and launching into manufacture. Products of industrial and technical designation. Procedure of product development and launching into manufacture
GOST R 50588-93: Foaming agents for fire extinguishing. General technical requirements and test methods
GOST R 50800-95: Automatic fire fighting foam systems General technical requirements Test methods
RD 50-204-87: Procedural Guidelines. Equipment Reliability. Gathering and Processing Data on In-Service Reliability of Articles. Basic Provisions
The Document is Referenced By:
Decision 200: On the list of international and regional (interstate) standards, and in their absence - national (state) standards, the application of which on a voluntary basis ensures compliance with the requirements of the technical regulations of the Eurasian Economic Union "On requirements for means of fire safety and fire fighting" (TR EAEC 043/2017), and the list of international and regional (interstate) standards, and in their absence - national (state) standards, containing rules and meters
GOST R 53704-2009: Complex and integrated security systems. General technical requirements
GOST R 54906-2012: Complex security systems. Environmental security and ecological safety guaranteed design. General technical requirements
GOST R 56677-2015: Means of physical protection engineering. Coding, identification and marking. General requirements
GOST R 57052-2016: Mining equipment. Automatic fire fighting systems (for mining). General technical requirements and test methods
Order 1317: The list of documents in the field of standardization, as a result of which, on a voluntary basis, compliance with the requirements of the Federal Law of July 22, 2008 No. 123-FZ "Technical Regulations on Fire Safety Requirements" is ensured
Order 1573: The list of national standards and sets of rules, as a result of which, on a voluntary basis, compliance with the requirements of the Federal Law of July 22, 2008 No. 123-FZ "Technical Regulations on Fire Safety Requirements" is ensured
Order 832: The list of documents in the field of standardization, as a result of which, on a voluntary basis, compliance with the requirements of the Federal Law of July 22, 2008 No. 123-FZ "Technical Regulations on Fire Safety Requirements" is ensured
RD EO 1.1.2.09.0772-2012: Methods of assessing the technical condition and resource characteristics of systems and fire protection ?a nuclear power plants
SP 485.1311500.2020: Fire protection systems. Automatic fire extinguishing installations. Norms and rules of design
|
Customers Who Viewed This Item Also Viewed:
 |
Preservative oil K-17
Language: English |
Jet fuels
Language: English |
Chill moulds. Ventilation channels. Dimensions
Language: English |
Laminated glued wood. Methods for determination of ultimate and modulus of elasticity in static bending
Language: English |
Ceramic brick and stone. General specifications
Language: English |
Microbiology of food and animal feeding stuffs. Methods for detection and enumeration of sulphite-reducing bacteria growing under anaerobic conditions
Language: English |
Maximum admissible amounts of chemical substances, emitting from the packaging materials into food products
Language: English |
System of design documents for construction. Rules for execution of the working documentation of architectural and construction solutions
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
