GOST R 53471-2009
ГОСТ Р 53471-2009
|
|
Synchronous three-phase generators of power above 100 kW. General specifications
Генераторы трехфазные синхронные мощностью свыше 100 кВт. Общие технические условия
Status: Effective - Introduced for the first time
This standard applies to three-phase synchronous generators with a capacity of over 100 kW, designed for continuous nominal operation S1 according to GOST R 52776 as sources of electrical energy of alternating current, manufactured for the needs of the national economy. Generators intended for export must comply with the requirements of GOST 28173. The standard does not apply to turbine generators, hydrogenerators and generators intended for use in onboard systems of mobile means of land, water and air transport
Настоящий стандарт распространяется на генераторы трехфазные синхронные мощностью свыше 100 кВт, предназначенные для продолжительного номинального режима работы S1 по ГОСТ Р 52776 в качестве источников электрической энергии переменного тока, изготовляемые для нужд народного хозяйства. Генераторы, предназначенные для экспорта, должны соответствовать требованиям ГОСТ 28173. Стандарт не распространяется на турбогенераторы, гидрогенераторы и генераторы, предназначенные для применения в бортовых системах подвижных средств наземного, водного и воздушного транспорта
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
12/9/2009
SKU: RUSS64161
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
29 Electrical Engineering »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.15 Testing and control of products of electronic, optical and electrical industry »
4.15.1 Electric machines, electrical equipment and materials »
ISO classifier »
29 ELECTRICAL ENGINEERING »
29.160 Electric rotating machines »
29.160.20 Generators »
National standards »
29 ELECTRICAL ENGINEERING »
29.160 Electric rotating machines »
29.160.20 Generators »
National Standards for KGS (State Standards Classification) »
Latest edition »
E Power and electrical equipment »
E6 Electric machines, transformers and converters »
E62 Generators »
The Document References:
Federal Law 184-FZ: About technical regulation
GOST 10169-77: 3-phase synchronous machines. Test methods
GOST 10198-91: Wooden boxes for weights of mass over 200 up to 20000 kg. General specifications
GOST 10511-83: Automatic rotational frequency control systems (ARFCS) of marine, locomotive
GOST 11828-86: Rotating electrical machines. General test methods
GOST 11929-87: Rotating electrical machinery. General test methods. Noise levels determinations
GOST 12.1.003-83: Noise. General safety requirements
GOST 12.1.012-2004: Occupational safety stаndards system. Vibration safety. General requirements
GOST 12.2.007.0-75: Occupation safety standards system Electrical equipment. General safety requirements
GOST 12.2.007.11-75: Occupation safety standards system. Semiconductor converters of electric energy. Safety requirements
GOST 12.2.007.1-75: Occupation safety standards system. Rotating electric machines. Safety requirements
GOST 12139-84: Electric rotary machines. Ranges of rated output, voltages and frequencies
GOST 13267-73: Rotating electrical machines and directly connected them nonelectrical ones. Shaft heights and control methods
GOST 14192-96: Cargo marking
GOST 14254-96: Degrees of protection provided by enclosures (IP Code)
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 15151-69: Machines, instuments and other industrial products for tropics. General specifications.
GOST 15543.1-89: Electrical articles. General requirements for environmental climatic aspects stability
GOST 16372-93: Rotating electric machines. Limiting values of noise levels
GOST 16504-81: The state system of testing products. Product test and quality inspection. General terms and definitions
GOST 16962.1-89: Electrical articles. Test methods as to environments climatic factors resistance
GOST 17412-72: Electrical articles for the cold climate regions. Technical requirements, acceptance and test methods
GOST 17494-87: Rotating electrical machines. Classification of degrees of protection provided by enclosures for rotating machines
GOST 17516.1-90: Electrical articles. General requirement for environment mechanical stability
GOST 17516-72: Electrical articles. Operating conditions as to environment mechanical aspects influence
GOST 18311-80: Electrical products. Terms and definitions of basic concepts
GOST 183-74: Rotating electrical machines
GOST 18709-73: Rotating electrical machines of middle size. Mounting dimensions.
GOST 2.601-2006: Unified system for design documentation. Exploitative documents
GOST 20459-87: Rotating electrical machines. Means of cooling. Symbols.
GOST 20815-93: Rotating electrical machines. Mechanical vibration of certain machines with shaft heights 56 mm and higher. Measurement, evaluation and limits of the vibration severity
GOST 20839-75: Rotating electrical machinery with shaft height from 450 to 1000 mm. Mounting dimensions
GOST 21130-75: Electrical articles. Grounding terminals and grounding signs
GOST 23875-88: Quality of electric energy. Terms and definitions
GOST 2479-79: Rotating electrical machines. Symbols for types of construction and mounting arrangements.
GOST 25941-83: Rotating electrical machines. Methods for determining losses and efficiency
GOST 27471-87: Electrical rotating machinery. Terms and definitions
GOST 28173-89: Rotating electrical machines. Rating and performance
GOST 2991-85: Wooden uncollapsible cases for weights up to 500 kg. General specifications
GOST 8032-84: Preferred numbers and series of preferred numbers
GOST 8592-79: Rotating electrical machines. Mounting and connecting dimensions. Tolerances and control methods
GOST 8865-93: Electrical insulation system. Thermal evalution and classification
GOST 9.032-74: Unified, system of corrosion and ageing protection. Paint coatings. Groups, technical requirements and designations
GOST 9.301-86: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. General requirements
GOST 9.401-91: Unified system of corrosion and ageing protection. Paint coatings. General requirements and methods of accelerated tests on resistance to the action of climatic factors.
GOST R 1.0-2004: Standardization in the Russian Federation. Basic provisions
GOST R 51318.11-2006: Electromagnetic compatibility of technical equipment. Industrial, scientific, medical and domestic (ISMD) high-frequency equipment. Radio disturbance. Limits and methods of measurement
GOST R 51318.11-99: Electromagnetic compatibility of technical equipment. Radio disturbance from industrial, scientific, medical and domestic (ISMD) radio-frequency equipment. Limits and test methods
GOST R 51320-99: Electromagnetic compatibility of technical equipment. Man-made radio disturbance. Test methods for technical equipment which are man-made radio disturbance sources
GOST R 51321.1-2007: Low-voltage switchgear and control gear assemblies. Part 1. Type-tested and partially type-tested assemblies. General technical requirements and test methods
GOST R 51908-2002: General requirements for machines, instruments and other industrial products as to storage and transporting conditions
GOST R 52776-2007: Rotating electrical machines. Rating and performance
GOST R 53148-2008: Rotating electrical machines. Noise limits
GOST R IEC 60034-14-2008: Electric rotating machines. Part 14. Mechanical vibration of certain types of machines with a rotation axis height of 56 mm or more. Measurements, assessment and limits of vibration
GOST R IEC 60034-5-2007: Rotating electrical machines. Part 5. Classification of protection degrees provided by the integral design of rotating electrical machines (IP code)
|
Customers Who Viewed This Item Also Viewed:
 |
Square steel tubes. Range
Language: English |
Design norms for antiseismic atomic power stations
Language: English |
Federal norms and rules in the field of the use of atomic energy. Valves for nuclear power plants. General technical requirements
Language: English |
Electric locomotives. General technical requirements
Language: English |
Pipeline valves. Leakage rates of valves
Language: English |
Federal Standards and Rules in the Field of Atomic Energy Use
Language: English |
Locomotive and motor rolling stock. Requirements of fire safety
Language: English |
Railway rolling stock. Methods for monitoring the performance of fire alarm and fire extinguishing systems
Language: English |
Oil. General specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
