GOST R 53790-2010
ГОСТ Р 53790-2010
|
|
Non-traditional technologies. Energetics of biowastes. General technical requirements for biogas sets
Нетрадиционные технологии. Энергетика биоотходов. Общие технические требования к биогазовым установкам
Status: Effective - Introduced for the first time
The standard applies to all types of biogas plants and establishes uniform technical requirements for them. The provisions of the standard are recommended to be applied to enterprises, unions, associations, concerns, joint-stock companies, inter-branch, regional and other associations, regardless of their form of ownership and subordination, located in the territory of the Russian Federation.
Стандарт распространяется на биогазовые установки всех типов и устанавливает единые технические требования к ним. Положения стандарта рекомендуется применять предприятиям, союзам, ассоциациям, концернам, акционерным обществам, межотраслевым, региональным и другим объединениям независимо от форм собственности и подчинения, расположенным на территории Российской Федерации.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
5/31/2010
SKU: RUSS64184
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
13 Environmental protection, protection of people from environmental exposure. Security »
PromExpert »
SECTION V. ENVIRONMENTAL PROTECTION. NATURE USE »
II Ensuring environmental safety »
3 Hazardous Waste Management »
3.3 Requirements for waste management in implementation of activities »
3.3.2 Requirements for waste producers in carrying out waste management activities »
3.3.2.7 Requirements for handling biological waste »
PromExpert »
SECTION V. ENVIRONMENTAL PROTECTION. NATURE USE »
I Environmental-legal and economic-legal mechanisms for environmental protection »
1 Management infield of environmental protection and environmental management »
1.1 Fundamentals of Environmental Management »
ISO classifier »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.020 Environmental protection »
National standards »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.020 Environmental protection »
ISO classifier »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.020 Environmental protection »
13.020.01 Environment and environmental protection in general »
National standards »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.020 Environmental protection »
13.020.01 Environment and environmental protection in general »
National Standards for KGS (State Standards Classification) »
Latest edition »
T General technical and organizational and methodological standards »
T5 Documentation System »
T58 System of standards infield of nature conservation and improvement of use of natural resources, labor safety, scientific organization of labor »
The Document References:
Federal Law 184-FZ: About technical regulation
GOST 12.1.004-91: Fire safety. General requirements
GOST 12.2.007.0-75: Occupation safety standards system Electrical equipment. General safety requirements
GOST 12.2.049-80: Occupational safety standards system. Industrial equipment. General ergonomic requirements
GOST 12815-80: Flanges for valves, fittings and pipelines for Pnom from 0,1 to 20 MPa (from 1 to 200 kgf/sq sm). Types. Connecting dimensions and dimensions of sealing surfaces
GOST 12816-80: Flanges for valves, fittings and pipelines for Pnom from 0,1 to 20 MPa (from 1 to 200 kgf/sq sm). General technical requirements
GOST 12817-80: Cast grey iron flanges for Pnom from 0,1 to 1,6 MPa (from 1 to 16 kgf/sq sm). Design and dimensions
GOST 12818-80: Cast malleable iron flanges for Pnom from 1,6 to 4,0 MPa (from 16 to 40 kgf/cm2). Design and dimensions
GOST 12819-80: Cast steel flanges for Pnom from 1,6 to 20,0 MPa (from 16 to 200 kgf/sq sm). Design and dimensions
GOST 12820-80: Steel plane welded flanges for Pnom from 0,1 to 2,5 MPa (from 1 to 25 kgf/cm2). Design and dimensions
GOST 12821-80: Steel butt-welded flanges for Pnom from 0,1 to 20,0 MPa (from 1 to 200 kgf/cm2). Design and dimensions
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 16037-80: Welded joints in steel pipelines. Main types, design elements and dimensions
GOST 20.39.108-85: General requirements complex system. Human factors, inhabitancy and technical aesthetics requirements. Nomenclature and order of choice
GOST 25136-82: Pipe-line connections. Leak tightness test methods
GOST 26349-84: Tube connections and fittings. Nominal pressures. Series
GOST 27.003-90: Reliability in engineering. Make-up and general rules for assigning reliability requirements
GOST 28338-89: Nominal bores (nominal sizes)
GOST 356-80: Valves and details for piping. Pressures conditional, test and operational. Lines.
GOST 5762-2002: Pipeline industrial valves. Gate valves PN<=250. General specifications
GOST 9544-2005: Pipeline gate valves. Classes and rates of gates sealibility
GOST R 1.0-2004: Standardization in the Russian Federation. Basic provisions
GOST R 50571.10-96: Electrical installations of buildings. Part 5. Selection and erection of electrical equipment. Chapter 54. Earthing arrangements and protective conductors
GOST R 50571.1-2009: Low-voltage electrical installations. Part 1. Fundamental principles, assessment of general characteristics and definitions
GOST R 51317.6.1-2006: Electromagnetic compatibility of technical equipment. Immunity of technical equipment intended for use in residential, commercial and light-industrial environments. Requiremеnts and test methods
GOST R 51317.6.3-2009: Electromagnetic compatibility of technical equipment. Electromagnetic disturbance from technical equipment intended for use in residential, commercial and light-industry environments Limits and test methods
GOST R 51317.6.3-99: Electromagnetic compatibility of technical equipment. Emission from technical equipment intended for use in residential, commercial and light-industry environments. Limits and test methods
GOST R 51330.9-99: Electrical apparatus for explosive gas atmospheres. Volume 10. Classification of hazardous areas
GOST R 52720-2007: Pipeline valves. Terms and definitions
GOST R 52760-2007: Pipeline valves. Requirements for the marking and distinctive painting
GOST R 52808-2007: Untraditional technologies. Energetics of bio wastes. Terms and definitions
PB 12-529-03: Gas distribution and gas consumption system safety rules. Series 12. Revision 4.
SP 56.13330.2011: Industrial buildings
The Document is Referenced By:
GOST 33380-2015: Organic fertilizers. Effluent. Specifications
GOST R 52106-2003: Resources saving. General
GOST R 55103-2012: Resource saving. Efficient control of resources. Basic regulation
|
Customers Who Viewed This Item Also Viewed:
 |
Metals. Methods of tension test
Language: English |
Liquids for aircrafts systems. Method for determination thermo oxidizing stability and corrosion activity
Language: English |
Natural gas for industrial and municipal purposes. Technical conditions
Language: English |
Global navigation satellite system. Emergency response system in case of accidents. Test methods for emergency services call device/system for compliance with the requirements for the quality of loudspeaker communication in the vehicle cab.
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.