imgalt

GOST R 55085-2012

ГОСТ Р 55085-2012

Cylinders steel welded on pressure 1,6 MPа for liquefied hydrocarbon gas, used as motor fuel on car transport facility. Specifications

Баллоны стальные сварные на давление 1,6 МПа для сжиженных углеводородных газов, используемых в качестве моторного топлива на автомобильных транспортных средствах. Технические условия

Status: Not effective - Canceled. Registration information 617-st dated 06/30/2017 (official website of Rosstandart); IUS 11-2017

This standard applies to steel welded cylinders without valves at a working pressure of 1.6 MPa, designed for liquefied hydrocarbon gases according to GOST 27578, used as motor fuel in automotive vehicles. The standard does not apply to toroidal cylinders.

Настоящий стандарт распространяется на стальные сварные баллоны без арматуры на рабочее давление 1,6 МПа, предназначенные для сжиженных углеводородных газов по ГОСТ 27578, используемых в качестве моторного топлива на автомобильных транспортных средствах. Стандарт не распространяется на баллоны тороидальной формы

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Federal Agency for Technical Regulation and Metrology, 11/14/2012

SKU: RUSS64290

Price: $283.00



imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 23 Hydraulic and pneumatic systems and components for general use. »

Welding regulations » Welding work »

Welding regulations » Main materials »

Welding regulations » Pipelines »

Welding regulations » Metal structures »

Welding regulations » welding equipment »

Welding regulations » Welding staff »

Welding regulations » Admission Testing »

Welding regulations » Certification »

Welding regulations » Documentation »

Welding regulations » Non-destructive control »

Welding regulations » Heat treatment »

Welding regulations » Defects »

Welding regulations » Welding work » Dusting »

Welding regulations » Main materials » Steel, cast iron »

Welding regulations » Welding materials » Gases »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.12 Testing and control of products of metallurgical industry » 4.12.6 Metal products »

ISO classifier » 23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS » 23.020 Storage tanks for liquids and gases » 23.020.30 Pressure vessels, gas cylinders »

National standards » 23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS » 23.020 Storage tanks for liquids and gases » 23.020.30 Pressure vessels, gas cylinders »


The Document References:

GOST 1050-88: Carbon structural quality steel gauged bars with special surface finish. General specifications

GOST 13078-81: Sodium glass liquid. Technical conditions

GOST 14249-89: Vessels and apparatus. Norms and methods of strength calculation

GOST 15.309-98: System of product development and launching into manufacture. Test and acceptance of produced goods. Principal positions

GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence

GOST 17410-78: Non-destructive testing of seamless cylindrical metal pipes and tubes. Methods of ultrasonic imperfection detection.

GOST 18442-80: Non-destructive testing. Capillary methods. General requirements

GOST 19151-73: Red lead. Specifications

GOST 19903-74: Hot-rolled steel sheets. Dimensions

GOST 19904-90: Cold-rolled steel sheets. Dimensions

GOST 2016-86: Thread gauges. Specifications

GOST 20415-82: Non-destructive testing. Acoustic methods. General principles

GOST 21105-87: Non-destructive testing. Method of magnetic particle testing

GOST 23055-78: Non-destructive testing. Fusion welding of metals. Welds classification by radiography testing results

GOST 24297-87: Input inspection of products. General provisions.

GOST 24705-2004: Вasic norms of interchangeability. Metric screw thread. Basic dimensions

GOST 24997-2004: Gauges for metric thread. Tolerances

GOST 24998-81: Gauges for tapes thread of valves and gas-bags. Tolerances

GOST 25859-83: Steel vessels and apparatuses. Norms and methods of fatigue strength calculation under low-cyclic loads

GOST 26266-90: Ultrasonic transducers

GOST 27578-87: Liquefied hydrocarbon gases for motor transport gases

GOST 3242-79: Welded joints

GOST 380-2005: Common quality carbon steel. Grades

GOST 5539-73: Litharge. Specifications

GOST 6996-66: Welded joints. Methods of mechanical properties determination

GOST 7512-82: Nondestructive testing. Welded joints. Radiography method

GOST 7931-76: Natural drying oil

GOST 8253-79: Calcium carbonate precipitated. Specifications

GOST 9.032-74: Unified, system of corrosion and ageing protection. Paint coatings. Groups, technical requirements and designations

GOST 9909-81: Basic norms of interchangeability. Taper screw thread of valves and gas cylinder

GOST R 15.201-2000: System of product development and launching into manufacture. Products of industrial and technical designation. Procedure of product development and launching into manufacture

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English
Price: $745.00
imgalt
Unified system for design documentation. Types and sets of design documentation
Language: English
Price: $139.00
imgalt
Loads and impacts
Language: English
Price: $306.00
imgalt
High strength rolled steel. General specification
Language: English
Price: $289.00
imgalt
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English
Price: $349.00
imgalt
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English
Price: $414.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!