imgalt

GOST 23732-2011

ГОСТ 23732-2011

Water for concretes and cement mortars Technical specifications.

Вода для бетонов и строительных растворов. Технические условия

Status: Effective

The standard applies to water used for the preparation of concrete and mortar mixes, as well as for the care of hardening concrete and washing aggregates (hereinafter - water for concrete and mortars), and establishes requirements for water quality for co

Стандарт распространяется на воду, применяемую для приготовления бетонных и растворных смесей, а также для ухода за твердеющим бетоном и промывки заполнителей (далее - вода для бетонов и растворов), и устанавливает требования к качеству воды для бетонов

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Federal Agency for Technical Regulation and Metrology, 5/31/2012

SKU: RUSS64433

Price: $316.00



imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Regulations » Documents System of normative documents in construction » 6. Regulatory documents for building materials and products » k.62 Concretes and mortars »

ISO classifier » 91 CONSTRUCTION MATERIALS AND CONSTRUCTION » 91.100 Building Materials » 91.100.30 Concrete and concrete products »

National standards » 91 CONSTRUCTION MATERIALS AND CONSTRUCTION » 91.100 Building Materials » 91.100.30 Concrete and concrete products »


As a Replacement Of:

GOST 23732-79: Water for concretes and mortars. Specifications

The Document References:

GOST 1.0-92: State System for Standardization of Russian Federation. Basic principles

GOST 10060.0-95: Methods for the determination of frost-resistance. General requirements

GOST 10060.1-95: Concretes, Basic Method For The Determination Of Frost-Resistance

GOST 10060.2-95: Concretes, rapid method for the determination of frost-resistance by repeated alternated freezing and thawing

GOST 10180-90: Concretes. Methods for strength determination using reference specimens

GOST 12730.5-84: Concretes. Methods for determination of water tightness

GOST 1770-74: Laboratory volumetric glassware. Cylinders, beakers, measuring flasks, test tubes. General specifications

GOST 18164-72: Drinking water. Method for determination of total solids content

GOST 18293-72: Drinking water. Methods for determination of lead, zinc and silver content

GOST 18309-72: Drinking water. Method for determination of polyphosphate content

GOST 18826-73: Drinking water. Methods for determination of nitrates content

GOST 23268.12-78: Drinking medicinal, medicinal-table and natural-table mineral waters. Method of determination of permanganate oxidation

GOST 23268.6-78: Drinking medicinal, medicinal-table and natural-table mineral waters. Method of determination of natrium ions

GOST 23268.7-78: Drinking medicinal, medicinal-table and natural-table mineral waters. Methods of determination of potassium ions

GOST 23732-79: Water for concretes and mortars. Specifications

GOST 24481-80: Drinking water. Sampling

GOST 25336-82: Laboratory glassware and equipment. Basic parameters and dimensions

GOST 2874-82: Drinking water. Hygienic requirements and quality control

GOST 310.3-76: Cements. Methods of tests consistency, times of settining and of soundness

GOST 31383-2008: Protection against corrosion of concrete and reinforced concrete constructions. Test methods

GOST 3351-74: Drinking water. Methods for determination of odor, taste, color and turbidity

GOST 4245-72: Drinking water. Method for determination of chloride content

GOST 4389-72: Drinking water. Methods for determination of sulfate content

GOST 7473-2010: Fresh concrete. Specifications

GOST R 51232-98: Drinking water. General requirements for organization and quality control methods

GOST R 56237-2014: Drinking water. Sampling on watertreatment stations and in piped distribution systems

GOST R 57164-2016: Drinking water. Methods for determination of odour, taste and turbidity

SNiP 10-01-94: System of normative documents in construction. Basic provisions.

The Document is Referenced By:

GOST 10060-2012: Concretes. Methods for the determination of frost-resistance

GOST 12730.5-2018: Concrete Methods for determining water resistance

GOST 13087-2018: Concrete Abrasion Determination Methods

GOST 17608-2017: The concrete paving slabs. Specifications

GOST 19222-2019: Arbolit and products from it. General specifications

GOST 19330-2013: Masts (poles) for overhead contact line supports of railways. Specifications

GOST 20054-2016: Concrete non-pressure pipes. Specifications

GOST 20910-2019: Concrete is heat-resistant. Technical specifications

GOST 22131-2016: Concrete towers for railway high voltage signal line of autoblock. Technical requirements

GOST 23789-2018: Gypsum binders. Test methods

GOST 24099-2013: Decorative facing slabs on basis of natural stone. Specifications

GOST 25098-2016: Reinforced concrete panels for partitions in industrial and agricultural buildings. Specifications

GOST 25214-2021: Dense silicate concrete. Technical specifications

GOST 25485-2019: Cellular concrete. General specifications

GOST 25820-2014: Lightweight aggregates concretes. Specifications

GOST 25912-2015: Prestressed reinforced concrete slabs for aerodrome pavement. Specifications

GOST 26633-2012: Heavy-weight and sand concretes. Specifications

GOST 26633-2015: Heavy-weight and sand concretes. Specifications

GOST 26816-2016: Cement-bonded wood boards. Specifications

GOST 28013-98: Mortars. General specifications

GOST 28575-2014: Corrosion protection in construction. Structural concrete. Test of vapour permeability of coatings

GOST 30491-2012: Organomineral mixtures and soils stabilized by organic binders for road and airfield construction. Specifications

GOST 30629-2011: Materials and products facing of rocks. Test methods

GOST 31384-2017: Protection of concrete and reinforced concrete structures against corrosion. General technical requirements

GOST 32209-2013: Reinforced for overhead contact line supports оf railways. Specifications

GOST 32492-2015: Fibre-reinforced polymer bar for concrete reinforcement. Determination of physical-mechanical properties

GOST 32803-2014: Self-stressing concrete. General specifications

GOST 32942-2022: Prestressed reinforced concrete beams for switches. General specifications

GOST 32943-2014: Materials and systems for the protection and repair of concrete structures. Requirements to bonded connections of structural strengthening elements

GOST 32955-2014: Public roads. Trays for road drainage. Technical specifications

GOST 33126-2014: Expanded clay concrete blocs. Specifications

GOST 33148-2014: Automobile roads of general use. Reinforced concrete slabs. Technical requirements

GOST 33320-2015: Ferro-concrete cross ties for railways. General specifications

GOST 33370-2015: Staple chemical fibres for reinforcement of building materials and structures. General specifications

GOST 33762-2016: Products and systems for the protection and repair of concrete structures. Requirements for injection-sealing compounds and seals of cracks, cavities and clefts

GOST 33929-2016: Concrete with polysterene aggregates. Specifications

GOST 33936-2016: Gas supply system. Trunk pipeline transportation of gas. Environment protection. Water protection. Water conditioning. Inspection

GOST 33937-2016: Gas supply system. Trunk pipeline transportation of gas. Environment protection. Water protection. Water conditioning. Technical requirements

GOST 34000-2016: Shaped charge. Test methods for function and safety

GOST 34028-2016: Reinforcing rolled products for reinforced concrete constructions. Specifications

GOST 34277-2017: Materials and systems for the protection and repair of concrete structures. Requirements for anchoring compositions and adhesion-strength fastenings of reinforcement elements

GOST 34518-2019: Industrial furnaces and thermal units. Rules for the organization and production of work, monitoring of performance and requirements for the results of work

GOST 34519-2019: Industrial chimney and ventilation pipes. Rules for the organization and production of work, monitoring of performance and requirements for the results of work

GOST 34885-2022: System of dry construction waterproofing mixtures based on cement binder for sealing static joints (cracks) in building structures. Technical conditions

GOST 6133-2019: Concrete wall stones. Technical conditions

GOST 6482-2011: Ferroconcrete nonpressure pipes. Technical specifications.

GOST 8735-88: Sand for construction work. Testing methods

GOST 9758-2012: Porous inorganic aggregates for construction work. Test methods

GOST R 51263-2012: Concrete with polystyrene aggregates. Specifications

GOST R 53682-2009: Fired heaters for refineries. General technical requirements

GOST R 54270-2010: Masts (Poles) for overhead contact line supports of railways. Specifications

GOST R 55943-2018: Systems facade composite insulation with outer plaster layers. Methods for determining and assessing climate resistance

GOST R 56178-2014: Modifiers of organic-mineral origin of MB type for concretes, mortars and dry mixes. Specifications

GOST R 56378-2015: Materials and systems for the protection and repair of concrete structures. Requirements for products repair and bond connections for rehabilitation of structures

GOST R 56506-2015: Coarse-pored claydite-concrete heat insulating tiles. Specifications

GOST R 56589-2015: Claydite-concrete heating main chutes. Specifications

GOST R 56591-2015: Expanded claydite-plaster blocks. Specifications

GOST R 56593-2015: Mineral admixtures for concretes and mortars. Test methods

GOST R 56600-2015: Reinforced concrete prestressed slabs for pavements of roads. Specifications

GOST R 56686-2015: Dry construction plaster mixes based on cement binder with use of ceramsite sand. Specifications

GOST R 56703-2015: Dry building in-depth waterproofing capillary mixes based on cement binder. Specifications

GOST R 56727-2015: Self-stressing cements. Specifications

GOST R 57255-2016: Photo catalytic self-cleaning concrete. Specifications

GOST R 57796-2017: Dry building mixes on cement binder with use of ceramsite sand for mortars. Specifications

GOST R 57984-2017: External rendering and internal plastering. The rules of estimation, preparation and application. Part 1. External rendering

GOST R 58035-2017: Special geotechnical works. Bored piles. Execution rules

GOST R 58276-2018: Dry mixes for building on a gypsum binder. Test methods

GOST R 58277-2018: Dry mixes for building on cement binder. Test methods

GOST R 58323-2018: Reinforced concrete pipes for trenchless laying of engineering networks. Technical conditions

GOST R 58411-2019: Flexible concrete slabs. Technical specifications

GOST R 58527-2019: Wall materials. Methods for determining compressive and bending strengths

GOST R 58766-2019: Building solutions. General specifications

GOST R 58894-2020: Condensed silica fume for concrete and mortars. Specifications

GOST R 70222-2022: Heavy concretes. Technical conditions

GOST R 70363-2022: Public roads. Concretes for construction of base layers and pavements. Test methods

GOST R 70452-2022: Public Roads. Soils stabilized and strengthened by inorganic binders. General technical conditions

GOST R 70453-2022: Public roads. Soils strengthened with organic binders. General technical conditions

GOST R 70455-2022: Public Roads. Crushed stone-gravel-sandy mixtures treated with inorganic binders. General technical specifications

GOST R 70521-2022: Reinforced Concrete Products for Silos of Elevators and Grain Processing Enterprises. General technical conditions

GOST R 70696-2023: Injection mortars for cement-based soil consolidation. Test methods

ODM 218.2.023-2012: Recommendations for the use of fast-hardening materials for the repair of cement concrete pavements

ODM 218.2.026-2012: Design and calculation guidelines for pile-anchor structures of highways

ODM 218.2.031-2013: Guidelines for the use of fly ash and ash-and-slag mixtures from coal combustion at thermal power plants in road construction

ODM 218.2.035-2013: Recommendations for the use of fly ash in concrete foundations of roads

ODM 218.2.066-2016: Guidelines for the use of anchor piles and micropiles as part of the engineering protection of roads

ODM 218.3.039-2014: Recommendations for testing film-forming materials for the care of freshly laid concrete

ODM 218.3.070-2016: Guidelines on formulation of self-compacting concrete with prescribed waterproof properties for bored piles

ODM 218.3.077-2016: Guidelines for justifying the parameters of design and technology in the repair of asphalt concrete pavements with layers of cement concrete

ODM 218.3.084-2020: Recommendations for the preparation and use of organic-mineral mixtures in the construction of structural layers of road pavements of capital and lightweight types

ODM 218.3.094-2017: Recommendations on engineering and geological surveys and design of engineering protection structures on road sections with the development of slope processes

ODM 218.3.095-2017: Corrosion protection of concrete and reinforced concrete structures of transport facilities

OST 32.72-97: Reinforced concrete slabs without ballast bridge bed for metal superstructures of railway bridges. General specifications

PNST 213-2017: Nanomaterials. Fresh concrete nanomodified for protective concrete. Technical requirements and test methods

PNST 269-2018: Automobile roads of general use. Geosynthetic materials for road construction. Method for determination of filtration coefficient for the system «soil-geosynthetic material-soil»

PNST 306-2018: Automobile roads of general use. Organo-mineral cold mixes with addition of recycled asphalt concrete pavement (RAP). Specifications

PNST 321-2019: General automobile roads. Soils reinforced with organic binders. Technical specifications

PNST 322-2019: General automobile roads. Soils stabilized and fortified with inorganic binders. Technical specifications

PNST 326-2019: General automobile roads. Mixtures of crushed stone, gravel and sand, treated with inorganic binders. Technical specifications

PNST 371-2019: Public roads with low traffic density. Road clothes. Design and calculation

PNST 61-2015: Foamed concrete thermo insulating blocks based on nanostructured binder. Specifications

PNST 69-2015: Silica nanostructured binder. Specifications

RMD 52-01-2006 Sankt-Peterburg: Design and construction of enclosing structures of residential and public buildings using cellular concrete in St. Petersburg. Part I

RMD 52-12-2012 Sankt-Peterburg: Typical temporary concrete fences during work on the city’s road network

SP 100.13330.2016: The reclamation systems and construction

SP 130.13330.2018: Production of prefabricated reinforced concrete structures and products

SP 229.1325800.2014: Reinforced concrete structures of underground and utility systems. Protection against corrosion

SP 243.1326000.2015: Design and construction of low-volume roads

SP 249.1325800.2016: Design and construction of underground utilities by closed and cut-and-cover methods

SP 250.1325800.2016: Building and structures. Protection against groundwater

SP 267.1325800.2016: High rise buildings and complexes. Design rules

SP 287.1325800.2016: Marine berthing facilities. Rules of design and construction

SP 289.1325800.2017: Constructions cattle-breeding, poultry-breeding and beast-breeding. Design rules

SP 341.1325800.2017: Underground engineering communications. Lining of by a method of the horizontal directional drilling

SP 357.1325800.2017: Concrete hydraulic structures. Rules of works and acceptance of works

SP 37.13330.2012: Industrial transport

SP 412.1325800.2018: The construction of foundations of high-rise buildings and structures. Work Rules

SP 435.1325800.2018: Monolithic concrete and reinforced concrete structures. Rules for the production and acceptance of work

SP 45.13330.2017: Earthworks, grounds and footings

SP 46.13330.2012: Bridges and pipes

SP 63.13330.2012: Concrete and reinforced concrete structures. General provisions.

SP 63.13330.2018: Concrete and reinforced concrete structures. Key Points

SP 70.13330.2012: Bearing and enclosing structures. Updated living edition of SNiP 3.03.01-87

SP 71.13330.2017: Insulation and finish coatings

SP 72.13330.2016: Protection of buildings, facilities and structures against corrosion

SP 78.13330.2012: Automobile roads

SP 99.13330.2016: On-farm roads in the collective and state farms and other agricultural enterprises and organizations

STO 95 12005-2017: Objects of use of atomic energy. Concrete work in the construction of the protective shell of the reactor installation of nuclear power plants. Basic requirements and quality control organization

STO DOKTOR BETON 68686983-001-2011: Dry building mixtures trade mark "ДОКТОР БЕТОН®" for waterproofing and repair concrete construction. Classification. Nomenclature of indicators. Technical requirements

STO DOKTOR BETON 68686983-002-2011: Dry building mixtures trade mark "ДОКТОР БЕТОН®" for waterproofing and repair concrete construction. Technical specifications and quality characteristics

STO DOKTOR BETON 68686983-003-2011: Dry building mixtures trade mark "ДОКТОР БЕТОН®" for waterproofing and repair concrete construction. Technologies execution and methods estimation of quality

Supplement to SP 63.13330: Toolkit. Calculation of reinforced concrete structures without prestressed reinforcement

TU 5859-002-59565714-2012: Concrete protective flexible universal slabs

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Building materials. Methods for combustibility test
Language: English
Price: $162.00
imgalt
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English
Price: $745.00
imgalt
Building materials spread flame test method
Language: English
Price: $147.00
imgalt
Clear sheet glass. Specifications
Language: English
Price: $250.00
imgalt
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English
Price: $349.00
imgalt
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $549.00
imgalt
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English
Price: $414.00
imgalt
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English
Price: $700.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!