GOST 8724-81
ГОСТ 8724-81
|
|
Basic norms of interchangeability. Metric screw thread. Diameters and pitches
Основные нормы взаимозаменяемости. Резьба метрическая. Диаметры и шаги
Status: Not effective - Superseded
The standard applies to general purpose metric threads with a profile according to GOST 9150-81 and sets their diameters in the range from 0.25 to 600 mm and steps from 0.075 to 6 mm.
Стандарт распространяется на метрические резьбы общего назначения с профилем по ГОСТ 9150-81 и устанавливает их диаметры в диапазоне от 0,25 до 600 мм и шаги от 0,075 до 6 мм.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstandart of the USSR,
4/23/1981
SKU: RUSS64438
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
21 Mechanical systems and general purpose devices »
ISO classifier »
21 MECHANICAL SYSTEMS AND GENERAL PURPOSE DEVICES »
21.040 Screw threads »
21.040.10 Metric threads »
National standards »
21 MECHANICAL SYSTEMS AND GENERAL PURPOSE DEVICES »
21.040 Screw Threads »
21.040.10 Metric threads »
National Standards for KGS (State Standards Classification) »
Latest edition »
G Machines, equipment and tools »
G1 General parts and units of machines »
G13 Threads »
National Standards for OKSTU »
SYSTEMS OF GENERAL TECHNICAL AND ORGANIZATIONAL-METHODOLOGICAL STANDARDS »
Detachable connections (threads, keys, splines, etc.) »
The Document is Replaced With:
GOST 8724-2002: Basic norms of interchangeability. Metric screw threads. General plan
As a Replacement Of:
GOST 8724-58: Thread metric for diameters of 1-600 mm. Diameters and pitches
The Document References:
GOST 16967-81: Basic norms of interchangeability. Metric thread for instrument-making industry. Diameters and pitches
GOST 9150-81: Basic norms of interchangeability. Metric screw thread. Profile
The Document is Referenced By:
GOST 11709-81: Metric screw threads in the range 1-180 mm diameters for the parts in plastics. Profile, basic dimensions and tolerances
GOST 11897-94: Tripods for geodetic instruments. General technical requirements and methods of tests
GOST 14213-89: Logging cable tips, sonde heads and logging tools heads. Types, main parameters, dimensions and technical requirements
GOST 15860-84: Steel welded cylinders for liquefied hydrocarbon gases at pressure up to 1.6 MPa.
GOST 16093-81: Basic norms of interchangebility. Metric screw thread. Tolerances. Clearance fits
GOST 16967-81: Basic norms of interchangeability. Metric thread for instrument-making industry. Diameters and pitches
GOST 20062-96: Tractor seat
GOST 21130-75: Electrical articles. Grounding terminals and grounding signs
GOST 21561-76: Automobile tanks for liquefied hydrocarbon gas transportation at pressure up to 1,8 MPa. General specifications
GOST 23476-79: Tramway and trolleybus overhead trolley wire supporting devices. General specifications
GOST 24705-81: Basic norms of interchangeability. Metric screw thread. Basic dimensions
GOST 25144-82: Air silencers. Specifications
GOST 26063-84: Industrial robots. Grippers. Types, nomenclature of basic parameters, connecting dimensions
GOST 26879-88: Agricultural tractors. Safety belts. Specification and test methods
GOST 27320-87: Expansive bolts. Construction
GOST 2746-90: Screw holders for electric lamps. General specifications
GOST 28456-90: Expansive dowels for building. General specifications
GOST 30326-95: Safety of information technology equipment included electrical business equipment
GOST 30539-97: Pneumatic fluid power. Quick-action couplings for nominal pressures 1,0; 1,6 and 2,5 MPa. Connecting dimensions, technical requirements and test methods
GOST 30850.1-2002: Switches for household or similar stationary electrical facilities. Part 1 General requirements and test methods.
GOST 30851.1-2002: Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCB'S). Part 1. General rules
GOST 31.0151.01-90: Universal and special-purpose setters
GOST 31841-2012: Petroleum and natural gas industries. Well service equipment. General technical requirements
GOST 7396.0-89: Plugs and socket-outlets for household and similar purposes. General specifications
GOST 7397.0-89: Switches for household and similar stationary electric devices
GOST 8724-2002: Basic norms of interchangeability. Metric screw threads. General plan
GOST 9000-81: Basic norms of interchangeability. Metric screw thread for diameters less than 1 mm. Tolerances
GOST 9740-71: Circular screw dies. Specifications
GOST R 50561-93: Hexagonal dienuts. Dimensions
GOST R 51322.1-99: Plugs and socket-outlets for household and similar purposes. Part 1. Requirements and methods of tests
GOST R 51324.1-99: Switches for household and similar fixed electrical installations. Part 1. General specifications and methods of tests
GOST R 51325.1-99: Appliance couplers for household and similar general purposes. Requirements and methods of tests
GOST R 51328-99: Portable residual current devices without integral overcurrent protection for household and similar use (PRCDs). General requirements and test methods
GOST R 51539-99: Cable reels for household and similar purposes. General requirements and test methods
GOST R 51686.1-2000: Connecting devices. Electrical copper conductors. Safety requirements for screw-type and screwless-type clamping units. Part 1. General requirements and particular requirements for clamping units for conductors from 0,2 up to 35 sq. mm (included)
GOST R 51686.2-2000: Connecting devices. Safety requirements for screw-type and screwless-type clamping units for electrical copper conductors. Part 2. Particular requirements for conductors from 35 up to 300 sq mm
GOST R 51701-2000: Connecting devices. Devices for the connection of aluminium conductors in clamping units of any material and copper conductors in aluminium bodied clamping units. General requirements and methods of tests
GOST R 52630-2012: Steel welded vessels and apparatus. General specifications.
GOST R 53680-2009: Petroleum and natural gas industries. Well service equipment. General technical requirements
GOST R 53737-2009: Petroleum and natural gas industries. Reciprocating compressors. General technical requirements
GOST R 54786-2011: Fastening parts for detachable connections of nuclear power plants. Specifications.
GOST R IEC 60950-2002: Safety of information technology equipment
OST 24.200.02-91: Assembling units of steel pipelines on nominal pressure<=10 MPa (100 kgf/cm2) of complete technological lines. General specifications.
OST 26-01-139-81: Studs threaded vessels and apparatus connections for pressure over 9.81 up to 98.1 MPa (over 100 up to 1000 kgf/cm2). Types. Design and dimensions.
OST 26-01-140-81: Nuts for threaded joints of vessels and apparatuses for pressure over 9.81 to 98.1 MPa (over 100 to 1000 kg/cm2). Types. Construction and dimensions.
OST 26-01-142-81: Sockets for threaded joints of vessels and apparatuses for pressure over 9.81 to 98.1 MP (100 to 1000 kg/cm2). Construction and dimensions.
OST 26-01-143-81: Protective caps for threaded joints of vessels and devices for pressure over 9.81 to 98.1 MPa (100 to 1000 kg/cm2). Design and dimensions.
OST 26-291-94: Steel welded vessels and devices. General technical requirements.
OST 34-10-739-93: Threaded rods with coupling. Design and dimensions.
OST 68-12-97: Devices for forced centring of geodetic instruments. Types, main parameters and specifications.
R 50-54-90-88: Recommendations. Calculations and tests of strength. General requirements for strength calculations for threaded connections
RD 153-34.1-39.603-99: Fittings repair manual of high parameters.
RD 26.260.010-2002: The leading document on standardization. The list of standard documentation on standardization on the cells and devices working under pressure.
RD 26.260.010-97: List of Regulatory Documents on Standardization for Pressure Vessels and Apparatus
TU 34-38-20140-94: Valves of gas pipelines TPP. General technical conditions for major repairs
TU 34-38-20197-94: Valves for steam and water DN 10, 20, 40, 50, 65 mm Chekhov factory of power engineering. Technical conditions for major repairs
TU 34-38-20365-94: Power valves. General technical conditions for major repairs
TU 34-38-20409-94: Pulse-safety devices Chekhov factory of power engineering. General technical conditions for major repairs
|
Customers Who Viewed This Item Also Viewed:
 |
Liquid lubricating and plastic materials. Method of test for lubricating properties on four ball machine
Language: English |
Armour clothes. Classification and general technical requirements
Language: English |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English |
Food products. Methods for detection and quantity determination of coliformes
Language: English |
Natural gas. Methods of calculation of physical properties. Calculation of physical properties on base information on density of standards conditions and nitrogen and carbon dioxide contents
Language: English |
Hotels design
Language: English |
Railroad rails. General specifications
Language: English |
Potassium chloride
Language: English |
Controllers acting without
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
