GOST R 55807-2013
ГОСТ Р 55807-2013
|
|
Non-destructive testing. Ultrasonic monitoring of internal straight pipe threads. General requirements
Контроль неразрушающий. Акустический метод контроля состояния внутренней трубной цилиндрической резьбы. Общие требования
Status: Effective - Introduced for the first time. IUS 8-2014
This standard establishes a method for determining the state of the internal tubular cylindrical thread of critical technical objects by the acoustic method using the methods of spectral processing of acoustic signals. The standard establishes the basic requirements for the procedure for determining the state of a thread by an acoustic echo method using electroacoustic transducers of elastic waves in the mode of manual scanning of the surface of the test object. The standard applies to internal pipe cylindrical threads according to GOST 6357 with an internal diameter of at least 30 mm. The method established by the standard can be applied both in laboratory tests and in the operation of technical objects for various purposes containing threaded connections with cylindrical pipe threads
Настоящий стандарт устанавливает метод определения состояния внутренней трубной цилиндрической резьбы ответственных технических объектов акустическим методом с применением приемов спектральной обработки акустических сигналов. Стандарт устанавливает основные требования к порядку определения состояния резьбы акустическим эхо-методом с использованием электроакустических преобразователей упругих волн в режиме ручного сканирования поверхности объекта контроля. Стандарт распространяется на внутреннюю трубную цилиндрическую резьбу по ГОСТ 6357 с внутренним диаметром не менее 30 мм. Устанавливаемый стандартом метод может быть применен как при лабораторных исследованиях, так и при эксплуатации технических объектов различного назначения, содержащих резьбовые соединения с трубной цилиндрической резьбой
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
11/22/2013
SKU: RUSS64622
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
77 Metallurgy »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
2 Tests for external factors »
2.2 Testing of manufacturing products »
ISO classifier »
77 METALLURGY »
77.040 Metal Testing »
77.040.10 Mechanical testing of metals »
National standards »
77 METALLURGY »
77.040 Metal Testing »
77.040.10 Mechanical testing of metals »
National Standards for KGS (State Standards Classification) »
Latest edition »
T General technical and organizational and methodological standards »
T5 Documentation System »
T59 General methods and means of control and testing of products. Methods of statistical control of quality, reliability, durability »
The Document References:
GOST 11708-82: Basic norms of interchangeability. Screw thread. Terms and definitions
GOST 12.1.001-89: Occupational safety standards system. Ultrasound. General safety requirements
GOST 12.1.004-91: Fire safety. General requirements
GOST 12.1.019-79: Occupational safety standards system. Electric safety. General requirements and nomenclature of kinds of protection
GOST 12.1.038-82: Occupational safety standards system. Electric safety. Maximum permissible values of pick-up voltages and currents
GOST 12.2.003-91: Industrial equipment. General safety requirements
GOST 12.3.002-75: Occupational safety standards system. Manufacturing processes. General safety requirements
GOST 17299-78: Technical ethyl alcohol. Specifications
GOST 23829-85: Acoustical non-destructive testing. Terms and definitions
GOST 26266-90: Ultrasonic transducers
GOST 2768-84: Acetone technical. Specifications
GOST 2789-73: Surface roughness. Parameters and characteristics
GOST 32-74: Turbine oils
GOST 6259-75: Reagents. Glycerin. Specifications
GOST 6357-81: Basic norms of interchangeability pipe cylindrical thread
GOST 7.32-91: System of standards on information, librarianship and publishing. The research report. Structure and rules of presentation
GOST R ISO 5725-2-2002: Accuracy (trueness and precision) of measurement methods and results. Part 2. Basic method for the determination of repeatability and reproducibility of a standard measurement method
SN 245-71: Sanitary standards for the design of industrial enterprises
|
Customers Who Viewed This Item Also Viewed:
 |
Tight and slack wooden barrels
Language: English |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Construction in seismic regions
Language: English |
2015 Kazakhstan PUE RK Rules for Arrangement of Electrical Installations. ALL SECTIONS.
Language: English |
Software for measuring instruments. Procedure for of certification. General provisions
Language: English |
Current transformers. General specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
