imgalt

GOST 25164-82

ГОСТ 25164-82

Connections of SSI instruments and devices with external hydraulic and gas lines. Types, basic parameters and dimensions. Technical requirements

Соединения приборов и устройств ГСП с внешними гидравлическими и газовыми линиями. Типы, основные параметры и размеры. Технические требования

Status: Not effective - Superseded

The standard applies to detachable connections of the State system of industrial devices and automation equipment with external pipelines designed to transmit hydraulic signals and power energy, supply measured, controlled or regulated liquid or gas medium with a conditional pressure of up to 160 MPa. Replaced NTD: GOST 15579-70 (in terms of connections with external hydraulic lines)

Стандарт распространяется на разъемные соединения Государственной системы промышленных приборов и средств автоматизации с внешними трубопроводами, предназначенными для передачи гидравлических сигналов и энергии питания, подвода измеряемой, контролируемой или регулируемой жидкостной или газовой среды с условным давлением до 160 МПа. Замененные НТД: ГОСТ 15579-70 (в части соединений с внешними гидравлическими линиями)

Choose Language: 
Format: Electronic (pdf/doc)

Approved: USSR State Committee for Standards, 3/10/1982

SKU: RUSS64656

Price: $745.66



imgalt

The Product is Contained in the Following Classifiers:

Welding regulations » Welding work »

Welding regulations » Main materials »

Welding regulations » Pipelines »

Welding regulations » Welding materials »

Welding regulations » Admission Testing »

Welding regulations » Non-destructive control »

Welding regulations » Welding work » Automatic welding »

Welding regulations » Welding work » Dusting »

Welding regulations » Main materials » Steel, cast iron »

Welding regulations » Welding materials » Gases »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 3 Activities of testing laboratories » 3.2 Technical equipment of testing laboratories » 3.2.2 Measuring instruments and test equipment » 3.2.2.1 Basic requirements for instruments and test equipment »

ISO classifier » 17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA » 17.020 Metrology and measurements in general »

National standards » 17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA » 17.020 Metrology and measurements in general »

National Standards for KGS (State Standards Classification) » Latest edition » P Measuring devices. Automation and computing facilities » P0 General rules and regulations for instrument-making industry » P04 Details and components of general application in instrument making »

National Standards for OKSTU » GENERAL PURPOSE INSTRUMENTS AND AUTOMATION » General rules and regulations »


The Document is Replaced With:

GOST 25164-96: Connections of instruments and devices with external hydraulic and gas lines. Types, basic parameters and dimensions. Technical requirements

The Document References:

GOST 10007-80: Polytetrafluoroethylene. Specifications

GOST 1050-74: High-grade constructional carbon steel

GOST 1051-73: Calibrated quality steel

GOST 10549-80: Screw thread runout. Washout threads, total thread runouts, undercuts and chamfers

GOST 12815-80: Flanges for valves, fittings and pipelines for Pnom from 0,1 to 20 MPa (from 1 to 200 kgf/sq sm). Types. Connecting dimensions and dimensions of sealing surfaces

GOST 12816-80: Flanges for valves, fittings and pipelines for Pnom from 0,1 to 20 MPa (from 1 to 200 kgf/sq sm). General technical requirements

GOST 12819-80: Cast steel flanges for Pnom from 1,6 to 20,0 MPa (from 16 to 200 kgf/sq sm). Design and dimensions

GOST 12820-80: Steel plane welded flanges for Pnom from 0,1 to 2,5 MPa (from 1 to 25 kgf/cm2). Design and dimensions

GOST 12821-80: Steel butt-welded flanges for Pnom from 0,1 to 20,0 MPa (from 1 to 200 kgf/cm2). Design and dimensions

GOST 12822-80: Steel loose flanges with welded ring for Pnom from 0,1 to 2,5 MPa (from 1 to 25 kgf/sq sm). Design and dimensions

GOST 12997-84: SSI Products. General specifications

GOST 1414-75: Construction steel with enhanced and high machinability

GOST 14613-83: Fibreboard. Specifications

GOST 16093-81: Basic norms of interchangebility. Metric screw thread. Tolerances. Clearance fits

GOST 21631-76: Sheets of aluminium and aluminium alloys. Specifications

GOST 21858-78: Threaded pipeline connections. End unions. Construction

GOST 21872-78: Threaded pipeline connections. Partition unions. Construction

GOST 22525-77: Threaded pipeline connections. Pipe nipple ends for union nuts. Construction

GOST 23353-78: Threaded pipeline connections. Cartive nut. Construction

GOST 23355-78: Threaded pipeline connections. Ball nipple. Construction

GOST 23997-80: Nozzles for pressure gauges. Technical requirements

GOST 24705-81: Basic norms of interchangeability. Metric screw thread. Basic dimensions

GOST 25165-82: Connections of SSI instruments and devices with external pneumatic lines. Types, basic parameters and dimensions. Technical requirements

GOST 2789-73: Surface roughness. Parameters and characteristics

GOST 356-80: Valves and details for piping. Pressures conditional, test and operational. Lines.

GOST 3778-77: Lead. Specifications

GOST 4784-74: Wrought aluminium and aluminium alloys. Grades

GOST 481-80: Compressed asbestos fibre sheets and gaskets from it. Specifications

GOST 495-77: Copper sheets and ribbons. Specifications

GOST 5632-72: High-alloy steels and corrosion-proof, heat-resisting and heat treated alloys. Grades

GOST 6111-52: Conical pipe thread. Profile, basic dimensions and tolerances

GOST 7338-77: Rubber and rubber-fabric sheets. Specifications

GOST 7798-70: Hexagon bolts, product grade B. construction and dimensions

GOST 859-78: Copper. Grades

GOST 8625-77: Pressure gauges, vacuum gauges and manometers, indicating. Basic parameters and dimensions

GOST 8734-75: Seamless steel tubes cold deformed. Range

GOST 9.306-85: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. Symbols

GOST 9399-81: Threaded steel flanges for Pn 20-100 MPa (200-1000 kgf/sq sm). Specifications.

GOST 9567-75: Precision steel tubes. Range

GOST 9833-73: Rubber toroidal sealing rings for hydraulic and pneumatic equipment. Construction and dimensions

GOST 9941-81: Seamless cold- and warm-deformed tubes made from corrosion-resistant steel

The Document is Referenced By:

GOST 12997-84: SSI Products. General specifications

GOST 16920-93: Manometric thermometers and temperature transducers

GOST 18140-84: SSI differential pressure gauges. General specifications.

GOST 22521-85: Pressure, vacuum and pressure difference transmitters with pneumatic analogue output signal of gsp (state system of industrial devices and automation systems)

GOST 25164-96: Connections of instruments and devices with external hydraulic and gas lines. Types, basic parameters and dimensions. Technical requirements

GOST 26055-84: Manipulators for construction and erection works

GOST 9898-79: Diaphragm pneumatic actuators SSI. General specifications

GOST R 50759-95: Gas analyses for control of industrial and transport emissions. General specifications

GOST R 50760-95: Gas and aerosol analysers for air pollution monitoring. General specifications

IM 4-12-95: Automation systems. Handbook of materials. Part 1. Basic materials

RM 4-246-91: Automation systems. General requirements for CAD

SNiP 3.05.07-85: Automated systems

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English
Price: $745.00
imgalt
Unified system for design documentation. Types and sets of design documentation
Language: English
Price: $139.00
imgalt
Loads and impacts
Language: English
Price: $306.00
imgalt
High strength rolled steel. General specification
Language: English
Price: $289.00
imgalt
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English
Price: $349.00
imgalt
Articulated connector devices with cast male and female parts for freight cars of articulated type. General technical specifications
Language: English
Price: $333.00
imgalt
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English
Price: $414.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!