GOST 6507-90
ГОСТ 6507-90
|
|
Micrometers. Specifications
Микрометры. Технические условия
Status: Effective. The limitation of the effectiveness period has been lifted: Decree of the State Standard No. 1354 dated 10.10.92
The standard applies to micrometers with a scale division of 0.01 and 0.001 mm.
Стандарт распространяется на микрометры с ценой деления 0,01 и 0,001 мм.
Choose Language:
Format: Electronic (pdf/doc)
Approved: USSR State Committee for Product Quality and Standards Management,
1/25/1990
SKU: RUSS64816
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
17 Metrology and measurements. Physical phenomena »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
3 Activities of testing laboratories »
3.2 Technical equipment of testing laboratories »
3.2.2 Measuring instruments and test equipment »
3.2.2.6 Instruments, tools and devices for linear, angular, profile and spatial measurements »
ISO classifier »
17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA »
17.040 Linear and angular measurements »
17.040.30 Measuring instruments »
National standards »
17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA »
17.040 Linear and angular measurements »
17.040.30 Measuring instruments »
National Standards for KGS (State Standards Classification) »
Latest edition »
P Measuring devices. Automation and computing facilities »
P5 Instruments, tools and devices for linear, angular, profile and spatial measurements »
P53 Instruments for measuring lengths (outer and inner dimensions) »
As a Replacement Of:
GOST 6507-78: Micrometers with a division value of 0.01 mm. Specification
The Document References:
GOST 13762-86: Measuring means for linear and angular measurements. Marking, packing, transporting and storage
GOST 2.601-95: Operational documents
GOST 2789-73: Surface roughness. Parameters and characteristics
GOST 3882-74: Sintered hard alloys. Types
GOST 6507-78: Micrometers with a division value of 0.01 mm. Specification
GOST 8.001-80: State system of ensuring the unity of measurements. Rules for conducting the state tests of measuring means
GOST 8.383-80: State system for ensuring the uniformity of measurements. State tests of means for measurements. General statements
GOST 9.032-74: Unified, system of corrosion and ageing protection. Paint coatings. Groups, technical requirements and designations
GOST 9.303-84: Unified system of corrosion and ageing protection. Metallic and non-metallic inorganic coatings. General requirements for selection
GOST 9038-90: Gauge blocks. Specifications
GOST 9391-80: Sintered Hard metals. Methods for determination of porosity and microstructure
MI 782-85: Guidelines. State system for ensuring uniformity of measurements. Micrometers with a division value of 0.01 mm. Method of verification
PR 50.2.009-94: The testing and approval procedure for the measurement instrumentation
The Document is Referenced By:
GOST 10007-80: Polytetrafluoroethylene. Specifications
GOST 10025-2016: Tin-phosphor bronze rods. Specifications
GOST 10025-78: Tin-phosphor bronze rods. Specifications
GOST 10092-2006: Cupro-nickel tubes for heat-exchange apparatus. Specifications
GOST 10092-75: Cupro-nickel tubes for heat-exchanging apparatus. Specifications
GOST 10155-2016: Manganin uninsulated wire. Specification
GOST 10155-75: Manganin uninsulated wire
GOST 10160-75: Magnetically soft precision alloys
GOST 1018-2015: Aluminium, copper, brass and cupronickel strips for capsules. Specifications
GOST 1018-77: Bands aluminium, copper, brass and cupronikel for capsules. Specifications
GOST 10234-77: Moderate strength flattened
GOST 102-75: Birch plywood for aircraft. Specifications
GOST 10292-74: Constructive glass-cloth-base laminate. Specifications
GOST 1048-2016: Strips of aluminium bronze for springs. Specifications
GOST 1048-79: Strips of aluminium bronze for springs. Specifications
GOST 1049-2015: Manganese nickel wire. Specifications
GOST 1049-74: Manganese nickel wire
GOST 10498-82: Seamless extra thin-walled tubes of corrosion-resistant steel
GOST 10505-76: Locked-coil hoisting steel wire ropes
GOST 1050-88: Carbon structural quality steel gauged bars with special surface finish. General specifications
GOST 10510-80: Metals. Erikson test method for sheets and strips extrusion
GOST 10533-86: Cold-rolled thermostatic bimetal strip
GOST 10543-82: Surfacing steal wire. Specifications
GOST 10543-98: Steel surfacing wire. Specifications
GOST 10633-2018: Wood chipboards and fibreboards. General rules for the preparation and conduct of physical and mechanical tests
GOST 10633-78: Wood particle boards. General requirements in testing physical and mechanical properties
GOST 1066-2015: Brass wire. Specifications
GOST 1066-90: Brass wire
GOST 10702-78: Steel bars, carbon and alloy, structural, for cold extruding and upsetting. Specifications
GOST 10703-73: Aluminium sheets for graphic arts industry. Specifications
GOST 10705-80: Electrically welded steel tubes. Specifications
GOST 10706-76: Electrically welded steel line-weld tubes. Technical requirements
GOST 10707-80: Steel cold shaped electrically welded tubes technical conditions
GOST 1071-81: Heat treated steel spring wire
GOST 10772-78: Antipenetration water-based washes
GOST 10821-75: Wire made of platinum and platinum-rhodium alloys for thermoelectric thermometers
GOST 10958-78: Protective glasses for apparatus of general industrial application. Specifications
GOST 10988-2016: Oxygen-free copper bars for electrovacuum industry. Specifications
GOST 10988-75: Oxygen-free copper bars for electrovacuum industry. Specifications
GOST 11017-80: High-pressure seamless steel pipes
GOST 11067-2013: Glass and glass products. Method for determination of mechanical properties. Determination of impact toughness
GOST 11068-81: Electric-welded pipes from corrosion-resistant steel
GOST 111-2001: Flat glass. Specifications
GOST 11249-80: Steel rolled up soldered double-layer tubes
GOST 11268-76: Structural thin sheets of special purpose alloyed high quality steel
GOST 11269-76: Universal rolled plates and wide strips made of special purpose structural high-grade Alloy steel
GOST 11383-2016: Thin-walled copper and brass tubes. Specification
GOST 11383-75: Thin-walled copper and brass tubes
GOST 11474-76: Bent-steel sections. Specifications
GOST 11529-2016: Polyvinylchloride materials for floors. Control methods
GOST 11529-86: PVC materials for floors. Methods of control
GOST 1173-2006: Copper foil, ribbons, sheets and plates. Specifications
GOST 1173-93: Copper strips. Specifications
GOST 1180-91: Zinc anodes. Specifications
GOST 1198-93: Asbestos brake bands
GOST 12004-81: Reinforcing-bar steel. Tensile test methods
GOST 1208-2014: Pressed bronze tubes. Specifications
GOST 12132-66: Electrowelded and seamless steel tubes for automotive and bicycle industries. Specifications
GOST 12177-79: Cables, wires and cords. Methods of construction checking
GOST 12393-2019: Rail contact network fittings linear. General specifications
GOST 12766.1-90: High electrical resistant wire made of precision alloys
GOST 12766.2-90: Strip from precision high electric resistance alloys
GOST 12766.3-90: Precision gauged alloys of high electric resistance
GOST 12766.4-90: Graded rolled stock of precision alloys of high electrical resistance
GOST 12766.5-90: Flattened strip of high electric resistance precision alloys
GOST 12851-87: Polystyrene filaments. Specifications
GOST 12920-2013: Brass wire for cold upsetting
GOST 12920-67: Brass wire for cold upsetting. Specifications
GOST 13073-2018: Zinc wire.Technikal requirements. Specifications
GOST 13073-77: Zinc wire
GOST 13083-2016: Rods of nickel and nickel-silicon alloys. Specifications
GOST 13083-77: Rods of nickel and nickel-silicon alloys. Technical requirements
GOST 13236-83: Electrotechnical periclase powders. Specifications
GOST 13345-85: Tin-plate and black plate
GOST 13548-2016: Thin-walled tubes of nickel and nickel alloys. Specification
GOST 13663-86: shaped steel pipes technical requirements
GOST 13726-97: Aluminium and aluminium alloys strips. Specifications
GOST 13744-87: Fluoroplast-3. Specifications
GOST 13843-78: Rod aluminium wire. Technical conditions
GOST 13844-68: Technical metallic gauges. Methods and means of verification
GOST 14080-78: Precision alloy strip with specified temperature coefficient of linear expansion. Specifications
GOST 14081-78: Wire of precision alloys with specified temperature coefficient of linear expansion. Specifications
GOST 14082-78: Bars and plates precision alloys with assigned temperature coefficient of linear expansion. Specifications
GOST 14117-85: Strip made from precision alloys for elastic elements
GOST 14118-85: Wire made of precision alloys, designed for elastic elements
GOST 14119-85: Rods from precision alloys for elastic elements
GOST 14162-79: Steel tubes of small dimensions (capillary)
GOST 14183-78: Organic watch glass. Specifications
GOST 14311-85: Steel cord
GOST 14340.1-74: Enameled round wires. Method for measurement of wires diameters
GOST 1435-99: Bars, strips and reels of tool unalloyed steel. General specifications
GOST 14613-83: Fibreboard. Specifications
GOST 14632-79: Multilayer and single-layer polyvinylchloride linoleum without backing. Technical requirements
GOST 14838-78: Aluminum wite
GOST 14955-77: Quality round steel with a special surface finish
GOST 14959-2016: Spring nonalloy and alloy steel product. Specifications
GOST 14959-79: Spring carbon and alloy steel bars. Specifications
GOST 1497-84: Metals. Methods of tension test
GOST 15040-2016: Oxygen-free copper pipes. Specification
GOST 15040-77: Oxygen-free copper pipes
GOST 15113.1-77: Food concentrates. Methods for determination of packing quality, net and volume weight, separate components mass fraction, particle size of certain types of product and milling grade
GOST 15146-69: Thermal-treated steel tape for musical instrument reeds. Specifications
GOST 1525-2015: Rods of monel. Specifications
GOST 1525-91: Rods of monel. Specifications
GOST 1526-81: Steel zinc-coated wire for electrical lead and cable armoring
GOST 1535-2006: Copper rods. Specifications
GOST 1535-2016: Copper rods. Specifications
GOST 1535-91: Copper rods. Specifications
GOST 15471-2014: Ribbons and strips made of oxygen-free copper for electronics. Specifications
GOST 15471-77: Strips and ribbons of oxygen-free copper for electronics. Specifications
GOST 15834-2016: Beryllium bronze wire. Specification
GOST 15834-77: Wire from beryllium bronze
GOST 15835-2013: Beryllium bronze bars. Specifications
GOST 15835-70: Beryllium bronze bars. Specifications
GOST 15867-79: Details and products of wood and wooden materials. Test method for determining the strength of glued joint for an uneven pilling of facing materials
GOST 15885-2018: Tin-zinc-lead bronze ribbons and strips. Specifications
GOST 15885-77: Tin-zinc-lead bronze ribbons and strips. Specifications
GOST 15892-70: Steel zinc-coated bind wire for aerial communication lines
GOST 1595-90: Aluminium-manganese bronze strips and ribbons. Specifications
GOST 15960-79: Friction flexible asbestos materials and products of them. Specifications
GOST 15960-96: Asbestos friction elastic materials
GOST 16130-90: Welding wire and rods of copper and copper alloys. Specifications
GOST 16135-70: Steel wire for calculating devices
GOST 16153-80: Monocrystalline germanium. Specifications
GOST 16214-86: Tape polyvinylchloride electro insulation
GOST 16218.1-93: Small wares. Method for determination of linear dimensions
GOST 1628-2019: Bars are bronze. Technical conditions
GOST 1628-78: Bronze rods. Specifications
GOST 16358-2019: Copper tapes for coaxial trunk cables. Technical conditions
GOST 16358-79: Copper strips for coaxial main cables. Specifications
GOST 16483.14-72: Wood. Methods for swelling testing
GOST 16483.35-88: Wood. Method for determination of swelling
GOST 16483.37-88: Wood. Method for determination shrinkage
GOST 167-2018: Lead tubes. Specifications
GOST 167-69: Lead tubes. Specifications
GOST 16774-2015: Copper tubes of rectangular and square sections. Specifications
GOST 16774-78: Copper pipes of rectangular and square section
GOST 17152-89: Steel hot-rolled shapes for cutting blades of earth-moving machines. General specifications
GOST 17217-2018: Tubes of copper-nickel alloy МНЖ 5-1. Specifications
GOST 17217-79: Copper-nickel alloyed tubes grade Mnzh 5-1
GOST 17305-91: Wire of carbon construction steel
GOST 17431-72: Powder material. M-MP alloy Sheets. Specifications
GOST 17432-72: Powder material M-MP alloy Forgings and Rods. Specifications
GOST 1761-2016: Tin-phosphorus and tin-zinc bronze ribbons and strips. Specifications
GOST 1761-92: Tin-phosphorus and tin-zinc bronze ribbons and strips. Specifications
GOST 17716-91: Looking-glasses. General specifications
GOST 1789-2013: Beryllium bronze strips and tapes. Specifications
GOST 1789-70: Beryllium bronze strips and ribbons. Specifications
GOST 1790-2016: Wire made of chromel alloy T, alumel, copes and constantan for thermoelectrodes of thermoelectric converters. Specification
GOST 1790-77: Wire made of chrome, aluminum, copper and constantan alloys for thermo electrodes of thermo-electric converters
GOST 1791-2014: Wire of nickel and copper-nickel alloys for extending wires for the thermoelectric converters. Specifications.
GOST 1791-67: Wire from nickel and copper-nickel alloys for extension leads to the thermoelectric transducers.
GOST 18143-72: Corrosion resistant
GOST 18326-87: Low-alloyed zinc sheets for one-stage and multistage etching. Specifications
GOST 18327-2018: Zinc strips for general use. Specifications
GOST 18327-73: Zinc strips for general use. Specifications
GOST 18351-73: Magnesium alloy extruded rods. Specifications
GOST 18389-73: Wire made of platinum and its alloys
GOST 18390-73: Wire from palladium and its alloys
GOST 18394-2016: Tin plated lead and tin foil. Specifications
GOST 18394-73: Tin plated lead foil and tin foil. Specifications
GOST 18407-73: Wood. Method for evaluation of electrical strength at a.c. voltage
GOST 18408-73: Wood. Methods for evaluation of electrical resistances at d.c. voltages
GOST 18475-82: Cold-worked aluminum and aluminum alloy pipes
GOST 18482-2018: Aluminium and aluminium alloy extruded tubes. Specifications
GOST 18482-79: Aluminium and aluminium alloy extruded pipes. Specifications
GOST 18599-2001: Polyethylene pressure pipes. Specifications
GOST 18599-83: Polyethylene pressure pipes
GOST 18846-2018: Zinc foil. Specifications
GOST 18846-73: Zinc foil. Specifications
GOST 18899-73: Steel wire ropes. Locked conveying wire ropes. Specifications
GOST 19086-80: Throw-away (indexable) carbide inserts. Specifications
GOST 19109-2017: Plastics. Method for determination of Izod impact strength
GOST 19277-2016: Seamless steel pipes, cold-deformed for oil and fuel pipelines. Specification
GOST 19277-73: Seamless steel tubes for oil and fuel lines. Specifications
GOST 19351-74: Iridium and rhodium wires
GOST 19441-74: Magnesium-alloy extruded tubes. Specifications
GOST 19570-2018: Panels made of autoclaved aerated concrete for floors of residential and public buildings. Technical specifications
GOST 19592-80: Fibre boards. Test methods
GOST 19657-84: Magnesium alloy pressed profiles. Specifications
GOST 19671-91: Tungsten wire for light sources
GOST 19703-79: Leaded brass wire type LS 63-3 specifications
GOST 19739-2015: Strips from silver solders. Specifications
GOST 20295-85: Welded steel pipes for gas and oil pipelines. Technical specifications
GOST 20302-74: Motor oils. Method of corrosion test for oils on engine 'Yas-204'
GOST 20303-74: Motor oils. Method of estimation of detergent characteristics of oils by installation ИМ-1
GOST 20571-75: Modified wood. Method for determination of shock resistance
GOST 2060-2006: Brass rods. Specifications
GOST 2060-90: Brass rods. Specifications
GOST 20707-2015: Copper and brass ribbons for radiators. Specifications
GOST 20707-80: Copper and brass ribbons for radiators. Specifications
GOST 20900-2014: Copper tubing for waveguides and brass right angle tubes. Specifications
GOST 20910-2019: Concrete is heat-resistant. Technical specifications
GOST 21007-75: Platinum wire for thermo elements of resistance
GOST 2132-2015: Nickel anodes. Specifications
GOST 2132-90: Nickel anodes. Specifications
GOST 21427.1-83: Electric steel thin sheets
GOST 21427.2-83: Cold-rolled isotropic electrical-sheet steel
GOST 21488-97: Pressed bars of aluminium and aluminium alloys. Specifications
GOST 21631-76: Sheets of aluminium and aluminium alloys. Specifications
GOST 21646-2003: Copper and brass tubes for heat-exchange apparatus. Specifications
GOST 21646-76: Brass tubes for heat exchange apparatus
GOST 2170-2016: Strips of nickel and nickel low alloys. Specifications
GOST 2170-73: Strips of nickel and nickel low alloys. Specifications
GOST 2172-80: Aviation steel ropes
GOST 21729-76: Construction cold-shaped and heat-shaped carbon and alloy steel pipes. Specification.
GOST 2179-2015: Nickel and siliceous nickel wire. Specifications
GOST 2179-75: Nickel and silicon nickel wire
GOST 21945-76: Seamless hot-rolled pipes from titanium-based alloys
GOST 2198-76: Reinforced asbestos cloth and gaskets of it. Specifications
GOST 21996-76: Cold-rolled heat treated steel-cord belt
GOST 21997-76: Steel flattened strip of high strength
GOST 2205-2016: L-90 tapes and strips for plating. Specifications
GOST 2205-71: L-90 tapes and strips for plating. Specifications
GOST 2208-2007: Brass foil, ribbons, strips, sheets and plates. Specifications
GOST 2208-91: Brass strips for general use. Specifications
GOST 22178-76: Titanium and titanium alloys sheets. Specifications
GOST 22233-2001: Aluminium alloy extruded sections for translucent envelopes. General specifications
GOST 22233-2018: Aluminium alloy extruded sections for translucent envelopes. Specifications
GOST 22233-93: Extruded sections of aluminium alloys for enclosure building structures. General specifications
GOST 22366-93: Iron-based sintered filler ribbon electrode
GOST 22635-77: Magnesium sheets. Technical requirements
GOST 22689.0-89: Polyethylene waste-pipes and fittings. General specification
GOST 22689-2014: Polyethylene pipes and fittings for waste discharge inside the buildings. Specifications
GOST 22706-77: Metals. Method for tension tests at the temperature - 100 up to - 269 °C
GOST 2283-79: Cold-rolled tape made of tool steel and spring steel
GOST 2284-79: Cold-rolled carbon structural steel strip
GOST 22897-86: Seamless cold-deformed pipes from alloys based on titanium. Specifications
GOST 23522-79: Cold-rolled strip for hack saws. Specifications
GOST 23697-79: Longitudinal welded tubes from aluminium alloys
GOST 23775-79: Carbon products. Methods of determination for compressive, bend, tensile, strengths (diametric compression)
GOST 23779-95: Asbestos paper
GOST 23886-91: Cadmium sheets and plates. Specifications
GOST 23949-80: Welding non-consumable tungsten electrodes specifications.
GOST 24039-80: Seal sheet materials, asbestos polymer. Method of measurements of sizes and density
GOST 24157-80: Plastic pipes. Method of determination of the resistance to constant internal pressure
GOST 24409-80: Ceramic electrotechnical materials. Methods of testing
GOST 24718-2014: Bands of platinum, palladium and their alloys. Specifications.
GOST 24718-81: Strips made of platinum, palladium, their alloys. Specifications
GOST 24866-99: Sealed insulating glass units. Specifications
GOST 24890-81: Welded titanium and titanium alloys pipes
GOST 24944-81: PVC film decorative finishing. Specifications
GOST 24950-2019: Curved bends and curve inserts on bends of the linear part of steel pipelines. Technical specifications
GOST 24982-81: Sheets of corrosion-resistant, heat-resistant and high-temperature alloys
GOST 25015-2017: Cellular plastics and foam rubber. Method of measuring linear dimensions
GOST 25015-81: Plastics cellular and foam rubber. Method for measuring linear dimensions
GOST 25280-90: Metal powders. Method for determination of compressibility
GOST 25282-93: Metallic powders. Method for determination of pressings strength
GOST 25283-93: Permeable sintered metal materials. Determination of fluid permeability
GOST 25428-82: Fluoroplast-42. Specifications
GOST 25442-82: Molybdenum annealed strips for deep drawing. Specifications
GOST 25474-2015: Anodes silver. Specifications
GOST 25475-2015: Anodes golden. Specifications
GOST 25552-82: Twisted and plaited goods. Methods of tests
GOST 2622-2016: Manometric tubes made of bronze БрОФ4-0,25 and brass Л63. Specifications
GOST 2622-75: Manometric tubes made of bronze БрОФ4-0,25 and brass Л63. Specifications
GOST 2624-2016: Copper and brass capillary tubes. Specification
GOST 2624-77: Copper and brass capillary tubes
GOST 26250-84: Drill pipes for borehole tools with retrievable core
GOST 26366-84: Brass-plated steel wire for base rings of tires
GOST 26469-85: Palladium-tungsten alloy wire
GOST 26492-85: Titanium and titanium alloys rolled bars. Specifications
GOST 26771-85: Electric micro-motors for toys
GOST 26816-2016: Cement-bonded wood boards. Specifications
GOST 26816-86: Cement-bonded wood boards. Specifications
GOST 26877-2008: Metal products. Methods of measuring form variations
GOST 26877-91: Metal products
GOST 26996-86: Polypropylene and copolymers of propylene. Specifications
GOST 27265-87: Titanium and titanium-alloy filling wire
GOST 27266-87: Molybdenum wire for light sources
GOST 27386-87: Electrical insulating
GOST 27680-88: Particle and fibre boards. Methods of shape and dimensions control
GOST 27708-88: Decontaminable protective polymeric materials and coatings. Method for testing the ease of decontamination
GOST 2786-82: Testing glasses for radii and form control of spherical optical surfaces. Specifications
GOST 27891-88: Polymer protective coatings for insulation, localization, deactivation and accumulation. Method for determination of stripping quality
GOST 28196-89: Water-dispersion paints
GOST 28393-89: PM bars and strips of high-speed steel. General specifications
GOST 2850-2022: Chrysotile cardboard. Technical specifications
GOST 2850-95: Asbestos paperboard
GOST 28515-97: Copper. Method of test for sample spiral elongation
GOST 285-69: Monobasic corrugated barbed wire
GOST 28637-90: Bristle brush articles. Check methods
GOST 28966.1-91: Polymer adhesives. Method of determining cleavage strength
GOST 28966.2-91: Polymer adhesives. Method of determining peel strength
GOST 28970-91: Polymer protective coatings for insulation, localization, deactivation, improving, radioactivity situation in radiation protected rooms and box-like premises. Technological requirements
GOST 29150-91: Accessories for products of light industry. Methods of checking
GOST 29316-92: Lining artificial leather. Method for determination of resistance to rubbing
GOST 2936-2016: Planc-oval scamless radiator tubes. Specifications
GOST 2936-75: Plane-oval seamless radiator tubes
GOST 2977-82: Planed veneer. Specifications
GOST 30065-93: Hubs for films and magnetic tapes. Specifications
GOST 30245-2012: Steel bent closed welded square and rectangular section for building. Specifications
GOST 30246-94: Continuously rolled sheet steel with paint coating for Building
GOST 30563-98: Seamless cold-worked carbon and alloy steel tubes for special purposes. Specifications
GOST 30564-98: Seamless hot-worked carbon and alloy steel pipes and tubes with special properties. Specifications
GOST 30565-98: Hot-rolled steel shapes for machine-Building in chemical engineering and oil industry. General specifications
GOST 30684-2000: Asbestos and non-asbestos gasket materials. Method of testing of tensile strength
GOST 30733-2000: Hard coat low emissivity glass. Specifications
GOST 30765-2001: Metal transport packagings. General specifications
GOST 30766-2001: Tins for chemical products. General specifications
GOST 30767-2002: Gas lift well use equipment. Safety requirements and test methods
GOST 30826-2001: Laminated glass for building. Specifications
GOST 31014-2002: Glass filled poliamides profils. Specifications
GOST 3110-74: Steel spoke wire
GOST 31366-2008: Brass rods for free machining purposes. Specifications
GOST 31412-2010: Seaweeds, sea grasses and products of their processing. Methods of identification of sensory and physical characteristics
GOST 31447-2012: Steel weldes pipes for trunk gas pipelines, oil pipelines and oil products pipelines. Specifications
GOST 31471-2011: Panic and emergency exit devices. Specifications
GOST 31537-2012: Wheelset assembly for locomotives and motor-powered units using shrink fit method. Typical technological process
GOST 31571-2012: Dental ceramic. Technical requirements. Test methods
GOST 31572-2012: Denture base polymers. Technical requirements. Test methods
GOST 31575-2012: Dental ceramic fused to metal restorative materials. Technical requirements. Test methods
GOST 31578-2012: Dental water-based cements. Technical requirements. Test methods
GOST 31622-2012: Wrought stainless steel for surgical implants. Specifications
GOST 31624-2012: Special alloy wire for connecting load-bearing and implanted members of products for organism's bones. General specifications
GOST 31625-2012: Special alloy strip and wire for connecting and implanted members of products for cardiovascular surgery. General specifications
GOST 31938-2012: Fiber-reinforced polymer bar for concrete reinforcement. General specifications
GOST 32068-2013: Subscribers telephone equipment. Safety requirements and test methods
GOST 32158-2013: Plywood with outer layers of miter splicing veneer for use in construction specifications
GOST 32277-2013: Product for reproduction. Semen. Physical, biological, biochemical, morphological analysis technique
GOST 32399-2013: Waterproof Wood Chipboards. Technical Specifications
GOST 32412-2013: Unplasticized polyvinylchloride pipes and fittings for waste discharge inside the buildings. Specifications
GOST 32413-2013: Unplasticized polyvinylchloride pipes and fittings for sewerage and drainage systems outside the buildings. Specifications
GOST 32414-2013: Polypropylene pipes and fittings for waste discharge inside the buildings. Specifications
GOST 3241-91: Steel ropes
GOST 32482-2013: Gold-rolled grain-oriented electrical steel sheet and strip for transformer. Specifications
GOST 32486-2013: Polymer composite frame for reinforcement of concrete structures. Methods for determination of durability characteristics
GOST 32486-2015: Fibre-Reinforced Polymer Bar for Concrete Reinforcement. Methods for determination of structural and thermo-mechanical characteristics
GOST 32487-2013: Polymer composite frame for reinforcement of concrete structures. Methods for determination of characteristics of resistance to the corrosive media
GOST 32487-2015: Fibre-reinforced polymer bar for concrete constructions. Methods for determination of characteristics of resistance to the corrosive media
GOST 32492-2013: Polymer composite frame for reinforcement concrete structures. Method for determination of physical and mechanical properties
GOST 32492-2015: Fibre-reinforced polymer bar for concrete reinforcement. Determination of physical-mechanical properties
GOST 32528-2013: Hot-deformed seamless steel pipes. Specifications
GOST 32557-2013: Glass and glass products. Inspection methods for geometric parameters and appearance
GOST 32565-2013: Safety glass for ground vehicles. General specifications
GOST 32567-2013: Wood boards with oriented particles. Specifications
GOST 32568-2013: Glass units for vehicles grazing. Specifications
GOST 32583-2013: Stainless steel table and kitchen cutlery. General specifications
GOST 32590-2013: Fittings of copper and copper alloys with ends for capillary soldering or capillary brazing to copper tubes. Specifications
GOST 32591-2013: Fittings of copper and copper alloys with compression ends for use with copper tubes. Specifications
GOST 32598-2013: Tubes copper round for water and gas. Specifications
GOST 3262-75: Water-supply and gas-supply steel pipes Technical conditions
GOST 32656-2017: Polymer composites. Test methods. Tensile tests
GOST 32678-2014: Pipes steel seamless and welded cold-bent for general purpose. Specifications.
GOST 32680-2014: Head current collection elements of pantographs of electric vehicle. General specification
GOST 32686-2014: Bottles from polyethylene terephthalate for food liquids. General specifications
GOST 32686-2022: Polyethylene terephthalate bottles for edible liquids. General specifications
GOST 32758-2014: Public roads. Temporary technical means of traffic management. Specifications and rules for use
GOST 3282-74: General-purpose low-carbon steel wire. Specifications
GOST 32931-2015: Profile steel pipes for metal constructions. Specifications
GOST 32949-2014: Automobile roads of general use. Supports of stationary electric lighting. Control methods
GOST 33065-2014: Plywood for truck, car, container building. Specifications
GOST 3306-88: Square mesh screens made of corrugated steel wire
GOST 33118-2014: Combined materials on basis of aluminium foil. Specifications
GOST 33123-2014: Pipe culverts made of polymer composites. Specifications
GOST 33212-2014: Non-grain oriented electrical steel strip. Specifications
GOST 33221-2015: Bottles from polyethylene terephthalate for chemical products. General specifications
GOST 33225-2015: Footwear. Methods for determining linear dimensions
GOST 33228-2015: Steel welded pipes for general purposes. Specifications
GOST 33229-2015: Tubes for boiler and heat exchanging equipment. Technical specifications. Part 1. Seamless steel pipes to work under pressure not more than 6,4 MPa and at temperatures not exceeding 400 C
GOST 33344-2015: Constructive pultruded profiles from polymer composites. General specifications
GOST 33345-2015: Polymer composites. Production of plates for preparation of test specimens. General technical requirements
GOST 33348-2015: Polymer composites. Production of plates from prepregs for preparation of test specimens
GOST 33370-2015: Staple chemical fibres for reinforcement of building materials and structures. General specifications
GOST 33375-2015: Polymer composites. Test method for open-hole tension testing of specimens
GOST 33377-2015: Polymer composites. Test method for filled-hole tension testing of specimens
GOST 33495-2015: Polymer composites. Test method for compression after impact
GOST 33496-2015: Polymer composites. Method for testing the resistance to damage during a falling weight impact
GOST 33506-2015: Cosmetics. Methods for the determination and assessment of toxicological safety indicators
GOST 33519-2015: Polymer composites. Test method for compression at normal, low and high temperatures
GOST 3357-72: Cotton fabrics for emery-cloths. Specifications
GOST 33672-2015: Automobile transport facilities. Antiskid studs. Requirements and test methods
GOST 33685-2015: Polymer composites. Test method for determination of the interlaminar fracture toughness under shear GIIC
GOST 33694-2015: Plastics. Determination of linear dimensions of test specimens
GOST 33721-2016: Head sets of electric drives, external contactors for switches. Safety requirements and methods of checking
GOST 33756-2016: Plastic consumer packaging. General specifications
GOST 33785-2016: Sealing materials and gaskets from them. Method of test for resistance to liquids
GOST 33837-2016: Polymeric packaging for food products. General specifications
GOST 33837-2022: Polymeric packaging for food products. General technical conditions
GOST 33843-2016: Polymer composites. Method for determining the shear modulus in the plane by the torsion method
GOST 33846-2016: Polymer composites. Methods for determining the content of resin, fiber and voids in carbon composites
GOST 34099-2017: Izdeliya sanitarno-gigienicheskie iz metalla dlya detej i podrostkov. Tehnicheskie usloviya
GOST 34117-2017: Cookware and tableware made of corrosion-resistant steel for children and teenagers. Technical conditions
GOST 34264-2017: Polymeric transport containers. General specifications
GOST 34368.2-2017: Plastics Method for the determination of creep in three-point bending
GOST 34379-2018: Translucent enclosing structures. Rules of inspection of technical conditions under natural conditions
GOST 34534-2019: Packaging. Polymer bottles for food liquids. General specifications
GOST 34576-2019: Flat wooden pallets. Quality fasteners to assemble new and repair used wooden pallets
GOST 34599-2019: Semi-solid and solid fibreboard. Technical conditions
GOST 34645-2020: Pipes and pipeline parts made of thermosetting plastics reinforced with fiberglass. Methods for obtaining the hydrostatic design basis and the calculated pressure value
GOST 34648-2020: Fiber-reinforced thermosetting plastics pipes and pipeline parts. Methods for determining the resistance of pipes and fittings to short-term effects of internal hydraulic pressure
GOST 34708-2021: Pipe fittings. Sealing materials based on thermally expanded graphite. General specifications
GOST 34861-2022: Non-asbestos sealing sheets and gaskets made of them. Technical conditions
GOST 3559-75: Steel band for armoring cables
GOST 3560-73: Sealing tepe
GOST 3822-79: Bimetallic steel-copper wire
GOST 3826-82: Wire cloth nets with square mesh. Specifications
GOST 3875-83: Steel card wire
GOST 3916.1-2018: Plywood for general use with outer layers of deciduous veneer. Specifications
GOST 3916.1-96: Plywood with external layers of deciduous veneer for general use
GOST 3916.2-2018: Plywood for general use with outer layers of coniferous veneer. Specifications
GOST 3916.2-96: General purpose plywood with coniferous veneer
GOST 3920-70: Tinned steel cable wire
GOST 39-79: Naphthame-2. Specifications
GOST 4041-2017: Hot-rolled thick-rolled for cold stamping from non-alloyed constructional quality steel. Technical conditions
GOST 4071.2-94: Insulating refractory products. Determination of cold compressive strength
GOST 434-78: Wire with rectangular cross-section and copper busbar wire for electrotechnical purposes
GOST 4442-2014: Bands and strips of lead brass. Specifications
GOST 4442-72: Strips and bands of lead brass. Specifications
GOST 4514-78: Straps for electrical industry. Specifications
GOST 4543-2016: Metal products from structural alloy steel. Specification
GOST 4543-71: Structural alloyed steel
GOST 4647-2015: Plastics. Method for determination of Charpy impact strength
GOST 4648-2014: Plastics. Method of static bending test
GOST 4727-83: Bearing wire
GOST 4748-92: Silicon-manganese bronze strips and ribbons. Specifications
GOST 4752-2012: Cylinder copper wire. Specifications
GOST 494-2014: Brass tubes. Specifications
GOST 494-90: Pipes of brass
GOST 495-92: Copper sheets and ribbons. Specifications
GOST 4960-2009: Electrolytic copper powder. Specifications
GOST 4960-2017: Copper electrolytic powder. Technical conditions
GOST 4960-75: Electrolytic copper powder. Specifications
GOST 4986-79: Cold-rolled band from corrosion-resistant and heat-resistant steel
GOST 5005-82: Electric-welded cold-worked steel pipes for cardan shafts
GOST 503-81: Cold-rolled low-carbon steel strip. Specifications
GOST 5063-2016: Ribbons of cupro-nikel alloys. Specifications
GOST 5063-73: Ribbons of cupro-nickel alloys. Specifications
GOST 5187-2003: Nickel silver, german silver and monel tapes. Specifications
GOST 5187-70: Nickel silver, german silver and monel tapes. Specifications
GOST 5189-2018: Constantan strips. Specifications
GOST 5189-75: Constantan strips. Specifications
GOST 5220-2018: Germen silver wire. Specifications
GOST 5220-78: Nickel silver wire
GOST 5221-2008: Tin-zink bronze wire. Specifications
GOST 5221-77: Tin-zinc bronze wire
GOST 5222-2016: Silicon-manganese bronze wire. Specifications
GOST 5222-72: Silicon-manganese bronze wire
GOST 5233-89: Paint materials. Method for determination of coating hardness pendulum instrument
GOST 5267.0-90: Hot-rolled sections for car building. General specifications
GOST 529-2015: Radiator tubes. Specifications
GOST 529-78: Radiator tubes
GOST 5307-2015: Constantan uninsulated wire. Specifications
GOST 5307-77: Constantan noninsulated wire
GOST 5336-80: Single woven steel grids
GOST 535-2005: Common quality carbon steel bar and shaped sections. General specifications
GOST 535-88: Common quality carbon bar and shaped sections. General specifications
GOST 5362-2018: Brass ribbons. Specifications
GOST 5362-78: Brass ribbons. Specifications
GOST 5422-73: Hot-rolled special steel sections for tractors. Technical specifications
GOST 5437-85: Reed wire
GOST 550-75: Seamless steel tubes for petroleum processing and petrochemical industry. Specifications
GOST 5529-75: Round brass wire for foot-wear industry
GOST 5582-75: Corrosion-resistant, heat-proof, and heat-resistant thin-sheet rolled stock
GOST 5654-76: Steel seamless hot-shaped pipes for shipbuilding
GOST 5663-79: Carbon steel wire for cold upsetting
GOST 5949-2018: Stainless corrosion resisting, heat-resisting and creep resisting steel and alloy on iron-nickel-based products. Specifications
GOST 5949-75: Gauged corrosion-resistant, heat-resistant and high-temperature steel shape
GOST 598-2020: General purpose zinc sheets. Specifications
GOST 598-90: General-purpose zinc sheets. Specifications
GOST 617-2006: General-purpose copper and brass tubes of round section. Specifications
GOST 617-90: Copper tubes. Specifications
GOST 618-2014: Aluminum foil for technical purposes. Specifications.
GOST 618-73: Aluminum foil for technical purposes. Specifications
GOST 6235-2020: Nickel sheets and strips. Specifications
GOST 6235-91: Strips and ribbons of nickel. Specifications
GOST 6238-77: Casing pipes and core barrels for prospecting drilling and nipples to them
GOST 6292-93: Rice groats
GOST 631-75: Upset drill pipes with couplings
GOST 6511-2014: Wrought tin-zinc bronze rods. Specifications
GOST 6511-60: Wrought stannic-zinc bronze rods. Specifications
GOST 6688-2016: Brass bars of rectangular section. Specifications
GOST 6688-91: Brass bars of rectangular section. Specifications
GOST 6727-80: Cold-drawn low-carbon steel wire for reinforced concrete. Specifications
GOST 6765-75: Hot rolled three-layer steel and wide steel strip (universal). Specifications
GOST 7221-2014: Strips made of gold, silver and their alloys. Specifications
GOST 7221-80: Strips out of gold, silver and their alloys. Technical conditions
GOST 7329-91: Chemical laboratory and electrovacuum glassware. Polarizable and optical method of path-length difference measuring
GOST 7348-81: Carbon steel wire for reinforcement of prestressed concrete constructions. Specifications
GOST 7370-2015: Railway frogs. Specifications
GOST 7372-79: Steel wire for ropes
GOST 745-2003: Aluminium foil for packing. Specifications
GOST 745-2014: Aluminium foil for packing. Specifications
GOST 745-79: Aluminium foil for packing. Specifications
GOST 7480-73: Polygraphic wire
GOST 7481-78: Armoured sheet glass. Technical requirements
GOST 7511-73: Steel sections for window and lantern transoms and window panels of industrial buildings. Specifications
GOST 7827-74: Solvents of grades P-4, P-4A, P-5, P-5A, P-12 for paint materials. Specifications
GOST 7837-76: Hunting, sporting shot and buck-shot
GOST 7871-2019: Welding wire of aluminum and aluminum alloys. Technical specifications
GOST 7871-75: Aluminum and aluminium alloy welding wire
GOST 792-67: Quality low-carbon wire
GOST 800-78: Bearing tubes. Technical requirements
GOST 8036-2013: Strips of brass Л90. Specifications
GOST 8036-79: Tombac strips. Specifications
GOST 808-70: Flattened steel strip for spiral rollers of bearings
GOST 8467-83: Steel drill pipes with
GOST 8617-2018: Pressed sections of aluminium and aluminium alloys. Specifications
GOST 8617-81: Pressed sections out of aluminium and aluminium alloys. Specifications
GOST 8673-2018: Plywood panels. Specifications
GOST 8696-74: General-purpose electrically welded spiral seam steel pipes. Specifications
GOST 8733-74: Cold-formed and heat-formed seamless steel pipes. Technical requirements
GOST 8733-87: Steel seamless cold-deformed and heat-deformed pipes. Technical specifications
GOST 89-2018: Rolled-in lead sheets. Specifications
GOST 89-73: Rolled-in lead sheets. Specifications
GOST 9.302-88: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. Control methods
GOST 9074-85: Joined by pins slot cloths
GOST 9124-85: Binding tin-coated steel wire
GOST 9161-85: Harness wire
GOST 9186-76: Cardboard for footwear and details made of the same. Rules of acceptance and test methods
GOST 931-90: Brass sheets and strips. Specifications
GOST 9389-75: Carbon steel spring wire
GOST 9424-79: Hardened glasses for scuttles. Specifications
GOST 9506.7-74: Brushes for electrical machines. The method for determination of the commutator's characteristics
GOST 9559-89: Lead sheets. Specifications
GOST 9590-76: Laminated paper decorative plastic. Specifications
GOST 9620-94: Laminated glued wood. Sampling and general requirements in testing
GOST 9622-2016: Laminated wood. Methods for determining the tensile strength and modulus of tensile elasticity
GOST 9622-87: Laminated glued wood. Methods for determination of ultimate strength and modulus of elasticity in tension
GOST 9623-87: Laminated glued wood. Method for determination of ultimate strength and modulus of elasticity in compression
GOST 9624-2009: Laminated glued wood. Method for determination of shear strength
GOST 9624-93: Laminated glued wood method for determination of shear strength
GOST 9625-2013: Laminated glued wood. Methods for determination of ultimate and modulus of elasticity in static bending
GOST 9625-87: Laminated glued wood. Method for determination of strength and elasticity module in static bending
GOST 9850-72: Zinc-coated steel core wire
GOST 9900-2013: Glass and glass products. Methods for determination of mechanical properties. Determination of elasticity modulus at cross static bending
GOST 99-2016: Veneer peeled. Technical conditions
GOST 9940-81: Seamless hot-deformed tubes made from corrosion-resistant steel
GOST 9941-2022: Cold-deformed seamless pipes made of corrosion-resistant high-alloy steels. Technical conditions
GOST 9941-81: Seamless cold- and warm-deformed tubes made from corrosion-resistant steel
GOST 99-96: Rotary cut veneer
GOST R 13.1.107-2005: Reprography. Micrography. Microforms of archival documents. General specifications
GOST R 50428-92: Hubs for films and magnetic tapes. Specifications
GOST R 50575-93: Steel wire. Requirements for zinc coating and testing methods
GOST R 50598-93: Structural laminates based on phenol-formaldehyde resins. General specifications
GOST R 50742-95: Cartridges for gas pistols, revolvers, shoot devices and gas tubeless arms. Safety requirements. Types and methods of control during safety certification tests
GOST R 50773-95: Polymer protective coatings for the improvement of radioactive situation. Methods used to determine the decontamination coefficient and time of protective action
GOST R 50838-2009: Polyethylene pipes for the supply of gaseous fuel. Specifications
GOST R 50838-95: Polyethylene pipes for the supply of gaseous fuel. Specifications
GOST R 51136-2008: Protective laminate glass. General specifications
GOST R 51136-98: Protective laminate glass. General specifications
GOST R 51190-98: Tubings for air brake systems of road vehicles with the use of polyamide tubes. General technical requirements
GOST R 51194-98: Brushes of electrical machines. Methods of dimensions examination
GOST R 51245-99: Steel universal drill rods. General specifications
GOST R 51287-99: Station telephone subscribers. Requirements for safety and test methods
GOST R 51393-99: Corrosion-resistant steel cold rolled sheets and decks cold-shaped sections for carriage building. Specifications
GOST R 51394-99: Wrought stainless steel for surgical implants. Specifications
GOST R 51396-99: Special alloy wire for connecting load-bearing and implanted members of products for organism's bones. General specifications
GOST R 51397-99: Special alloy strip and wire for connecting and implanted members of products for cardiovascular surgery. General specifications
GOST R 51573-2000: Tubes from alloyed brasses for heat-exchange apparatus. Specifications
GOST R 51611-2000: Special purpose rounds for self-defence tubeless fire-arms (complex 'OSA'). General technical requirements. Safety requirements and test methods
GOST R 51613-2000: Pressure pipes made of unplasticized polyvinylchloride. Specifications
GOST R 51667-2000: Brushes for electrical machines. Methods for determination of the commutator characteristics
GOST R 51682-2000: Casing and coring tubes for geology-exploring drilling. Specifications
GOST R 51687-2000: Stainless steel table and kitchen cutlery. General specifications
GOST R 51735-2001: Dental ceramic. Technical requirements. Test methods
GOST R 51736-2001: Dental ceramic fused to metal restorative materials. Technical requirements. Test methods
GOST R 51744-2001: Dental water-based cements. Technical requirements. Test methods
GOST R 51760-2001: Polymeric consumers packagings. General specifications
GOST R 51760-2011: Polymeric consumer's containers. General specifications
GOST R 51867-2002: Ceramic denture teeth. Technical requirements. Test methods
GOST R 51877-2002: Combined flexible materials for electrical insulation. General specifications
GOST R 51889-2002: Denture base polymers. Technical requirements. Test methods
GOST R 51924-2002: Double tube core barrel for exploration drilling. General technical specifications
GOST R 52079-2003: Steel welded pipes for trunk gas pipelines, oil pipelines and oil products pipelines. Specifications
GOST R 52123-2003: Port-holes for diving hyperbaric chambers with operating pressure up to 4,9 MPa (50 kgf/sq cm). General specifications
GOST R 52132-2003: Items of net for gabion constructions. Specifications
GOST R 52145-2003: Combined materials on basis of aluminium foil. Specifications
GOST R 52172-2003: Glass units for vehicles glazing. Specifications
GOST R 52203-2004: Tubing and coupling. Specifications
GOST R 52318-2005: Round copper tubes for water and gas. Specifications
GOST R 52569-2006: Frits. Specifications
GOST R 52569-2018: Frits. Specifications
GOST R 52597-2006: Brass rods for free machining purposes. Specifications
GOST R 52620-2006: Transport polymeric containers. General specifications
GOST R 52664-2010: Welded pipe sheet piles. Specifications
GOST R 52750-2007: Panic and emergency exit devices. Specifications
GOST R 52789-2007: Bottles from polyethylene terephthalate for food liquids. General specifications
GOST R 52922-2008: Fittings from copper and copper alloys for capillary soldering to copper tubes. Specifications
GOST R 52927-2015: Rolled of normal, increased - and high-strength steel for shipbuilding. Specifications
GOST R 52948-2008: Fittings from copper and copper alloys with compression ends for use with copper tubes. Specifications
GOST R 53191-2008: Wheelset assembly for locomotives and motor-powered units using shrink fit method. Typical technological process
GOST R 53201-2008: Fibre-glass plastic pipes and fittings. Specifications
GOST R 53201-2023: Composite polymer pipes and fittings with threaded joints for pressure and non-pressure pipelines. Technical conditions
GOST R 53286-2009: Fire engineering. Automatic dry chemical fire fighting system. Module. General technical requirements. Test methods
GOST R 53370-2009: Removable protective polymeric covering for radiation protective rooms and box-like premises. Improvement of radioactivity situation. Technological requirements
GOST R 53371-2009: Decontaminable protective polymeric material and coating. Method used determine the decontamination coefficient
GOST R 53383-2009: Hot-deformed seamless steel pipes. Specifications
GOST R 53405-2009: Copper cylinder wire. Specifications
GOST R 53439-2009: Brass wire for cold upsetting. Specifications
GOST R 53499-2009: Tombac strips. Specifications
GOST R 53542-2009: Aviation engines and their components. Brazing of high-alloy steels in vacuum. General requirements for technological process
GOST R 53568-2009: Non-destructive testing. Evaluation of third order elasticity modulus by ultrasound. General requirements
GOST R 53652.1-2009: Thermoplastics pipes. Method for determination of tensile properties. Part 3. General requirement
GOST R 53655.1-2009: Plastics film and sheeting. Determination of impact resistance by the free-falling weight method. Part 1. Staircase methods
GOST R 53671-2009: Pipeline valves. Swing and lift check valves. General specifications
GOST R 53673-2009: Pipeline valves. Butterfly wicket valves. General specifications
GOST R 53772-2010: Reinforced steel low-relaxation 7-wire strands. Specifications
GOST R 53784-2010: Optical elements for light signal devices of a railway transport. Specifications
GOST R 53803-2010: Copper rod for electrical purposes. Specifications
GOST R 53920-2010: Laminated plywood. Specifications
GOST R 53934-2010: Grain-oriented electrical steel strip. Specifications
GOST R 54086-2010: Pressure regulators. General specifications
GOST R 54109-2010: Secure technologies. Security printing products. General technical requirements
GOST R 54150-2010: Wire from БрКМц3-1 bronze. Specifications
GOST R 54151-2010: Platinum alloys catalytic gauzes. Specifications
GOST R 54152-2010: Tapes and strips from Л90 brass for plating. Specifications
GOST R 54154-2010: Sanitary ware made from metal for children and teenagers. Specifications
GOST R 54156-2010: Table utensils made from stainless steel for children and teenagers. Specifications
GOST R 54157-2010: Profile steel pipes for metal constructions. Specifications
GOST R 54158-2010: Thin-walled tubes from copper and copper alloys. Specifications
GOST R 54159-2010: Seamless and welded cold deformed steel pipes for general purposes. Specifications
GOST R 54160-2010: Ribbons from cuprum-nickel, nickel silver and monel. Specifications
GOST R 54170-2010: Clear flat glass. Specifications
GOST R 54171-2010: Laminated glass. Specifications
GOST R 54175-2010: Sealed insulating glass units. Specifications
GOST R 54177-2010: Hart coat low emissivity glass. Specifications
GOST R 54179-2010: Hard coating solar protection or decorative glass. Specifications
GOST R 54301-2011: Cold-rolled electrolyze zinc sheet with polymer coating, repainted by the continuous coil-coating process. Specifications
GOST R 54475-2011: Plastics structured-wall pipes and their fittings for sewerage systems outside the buildings. Specifications
GOST R 54480-2011: Non-grain oriented electrical steel strip. Specifications
GOST R 54568-2011: Tubes from alloy МНЖ5-1. Specifications
GOST R 54574-2011: Steel drums for paint materials. Specifications
GOST R 54592-2011: Foot-wear. Methods for determination of linear dimensions
GOST R 54864-2011: Hot-deformed seamless steel pipes for the welded steel structures. Specifications
GOST R 54864-2016: Hot-deformed seamless steel pipes for the welded steel structures. Specifications
GOST R 54913-2012: Modified wood. Method for determination of pressure in swelling
GOST R 54923-2012: Polymer composite wall ties for multilayer envelope buildings. Specifications
GOST R 54929-2012: Steel welded pipes for general purposes. Specifications
GOST R 55020-2012: Pipeline valves. Knife gate valves for trunk pipelines. General specifications
GOST R 55046-2012: Technical diagnostics. Evaluation of residual resource of long used steel pipelines on the basis of samples mechanical tests results. General requirements
GOST R 55068-2012: Glass-fibre and basalt-fibre reinforced epoxy plastic pipes and parts of pipelines. Specifications
GOST R 55078-2012: Fiberglass reinforced thermosetting plastic pipes. Glass reinforced thermosetting plastics cylinder shells of chimney and flue-pipes. Specifications
GOST R 55084-2012: Strips and foil made of iridium and rhodium. Specifications
GOST R 55411-2013: Roll-formed shapes of aluminium and aluminium alloys. Specifications
GOST R 55442-2013: Tubes for boiler and heat exchanging equipment. Specifications. Part 1. Seamless steel pipes to work under pressure not more than 6,4 MPa and at temperatures not exceeding 400 °C
GOST R 55504-2013: Metal tins for preserve. Specifications
GOST R 55647-2018: Copper and copper alloy trolley wires for electric railways. Specifications
GOST R 55951-2014: Modified wood. Method for determining the wear resistance and friction coefficient
GOST R 56030-2014: Pipes for details of bearings. Technical specifications
GOST R 56064-2014: Safety of attractions. Capital repair of attractions. Procedure
GOST R 56177-2014: Controlled door closing devices (door closers). Specifications
GOST R 56209-2014: Rods composite polymer for the manufacture of cores uninsulated wires. Specifications
GOST R 56309-2014: Oriented strand wood construction boards. Specifications
GOST R 56403-2015: Trunk pipelines for oil and oil products transportation. Welded steel pipes. Specifications
GOST R 56500-2015: Acrylic sheets for aircraft glazing. Methods for determination of optical characteristics
GOST R 56594-2015: Hot-deformed seamless pipes made of corrosion-resistant high-alloy steel. Specifications
GOST R 56650-2015: Polymer composites. Methods for determination of tensile properties of pultruded glass-reinforced plastic rods
GOST R 56651-2015: Polymer composites. Method for determination of shear properties of sandwich core materials
GOST R 56652-2015: Polymer composites. Methods for determination of water absorption of core materials for sandwich constructions
GOST R 56653-2015: Polymer composites. Determination of shear strength of pultruded glass-reinforced plastic rods by the short-beam method
GOST R 56654-2015: Polymer composites. Method for determination of density of sandwich core materials
GOST R 56655-2015: Polymer composites. Method for determination of in-plane shear strength of pultruded glass–reinforced plastic rods
GOST R 56656-2015: Metal composites. Method for determination of tensile properties of fibre reinforced metal matrix composites
GOST R 56657-2015: Polymer composites. Method for determination of flexural properties of glass-fibre reinforced pultruded plastic rods
GOST R 56661-2015: Polymer composites. Method for determination of «sandwich» core materials’ Poisson’s Ratio
GOST R 56678-2015: Polymer composites. Method of determination of sandwich core materials’ dimensional stability
GOST R 56679-2015: Polymer composites. Method for determination of voids
GOST R 56680-2015: Polymer composites. Determination facing’s mechanical flexural properties of sandwich construction by long beam flexure method
GOST R 56681-2015: Polymer composites. Determination of mechanical characteristics by compression of unidirectional reinforcement materials by four-point bending of sandwich beam
GOST R 56682-2015: Polymer and metal composites. Method for determination the volume of matrix, reinforce filler and voids
GOST R 56712-2015: Panel multilayer polycarbonate. Specifications
GOST R 56739-2015: Polymer composites. Method for determination of water migration in sandwich construction cores
GOST R 56740-2015: Polymer composites. Method for determination of translaminar fracture toughness characteristic of polymer composite laminates and pultruded polymer composites
GOST R 56772-2015: Polymer composites. Method for determination static energy absorption properties of honeycomb sandwich core materials
GOST R 56774-2015: Polymer composites. Determination of two-dimensional mechanical characteristics of bending sandwich constructions subjected to a distributed load
GOST R 56785-2015: Polymer composites. Test method for tensile of flat specimens
GOST R 56786-2015: Polymer composites. Method for determination of shear strength in the plane of the reinforcement
GOST R 56788-2015: Polymer composites. Test method open-hole compressive strength of polymer matrix composite laminates
GOST R 56790-2015: Polymer composites. Method for determination of bearing strength and bypass strength of laminates connected to one another by two bolts
GOST R 56791-2015: Polymer composites. Determination of mechanical characteristics of shear of the inner layer of sandwich constructions by beam flexure
GOST R 56792-2015: Polymer composites. Test method on stratifying with winding on drum
GOST R 56797-2015: Polymer composites. Axial compressive test method for mechanical characteristics of hoop wound polymer matrix composite cylindrical specimens
GOST R 56799-2015: Polymer composites. Method of definition of mechanical characteristics at shear on samples with V-notched cut
GOST R 56800-2015: Polymer composites. Determination of tensile properties of unreinforced and reinforced materials
GOST R 56805-2015: Polymer composites. Methods for determination of flexural properties
GOST R 56808-2015: Polymer composites. Method for determination interlaminar fracture toughness of unidirectional-reinforced composites
GOST R 56810-2015: Polymer composites. Test method for flexural flat samples
GOST R 56812-2015: Polymer composites. Method for determination of mechanical characteristics in combined loading compression
GOST R 56813-2015: Polymer composites. Guide for preparation of flat panel testing and machining
GOST R 56815-2015: Polymer composites. Method for determination specific work of exfoliation in tearing off conditions GIC
GOST R 57009-2016: Polymer composites. Test method for fracture strength in cleavage of adhesives in bonded joints
GOST R 57041-2016: Polymer composites. Method of determination of the characteristics of flexural curved beams
GOST R 57045-2016: Polymer composites. Test method for determination of tensile properties perpendicular to reinforcement plane
GOST R 57047-2016: Polymer composites. Method for determination of the characteristics of fatigue resistance of laminates
GOST R 57049-2016: Polymer composites. Test method for shear fatigue of sandwich core materials
GOST R 57066-2016: Polymer composites. Test method for lap shear adhesion for bonded joints
GOST R 57142-2016: Polymer composites. Method for determination of shrinkage stresses in the oriented organic glasses
GOST R 57151-2016: Polymer composites. Method of constructing the curve of equilibrium deformation of samples of organic glasses
GOST R 57152-2016: Polymer composites. Method for determination of highly elastic and relaxation characteristics of organic glasses
GOST R 57173-2016: Calculation and strength testing. Methods of mechanical testing of metals. Test for stress relaxation of metals and alloys at a compression. General requirements
GOST R 57177-2016: The induction-metallurgical method of surfacing. Technological process
GOST R 57178-2016: Electric-contact method of surface hardening of details. Typical technological process
GOST R 57180-2016: Welding joints. Methods for determination of mechanical properties, macrostructure and microstructure
GOST R 57206-2016: Polymer composites. Test method of determination of the mode II fracture toughness for the calibrated end-loaded split (C-ELS)
GOST R 57207-2016: Polymer composites. Test method for shear properties of V-notched test samples
GOST R 57223-2016: Technical diagnostics. Evaluation of steel pipelines condition under the parameters of the deformation relief in operation. General requirements
GOST R 57231-2016: Electromagnetic compatibility of technical equipment. Radar-absorbing structural polymer composites. General specifications
GOST R 57407-2017: Carbon fibers. General technical requirements and test methods
GOST R 57423-2017: Tubes for boiler and heat exchanging equipment. Part 2. Seamless steel tubes for pressure purposes more 6, 4 MPa and temperatures exceeding 400 °C. Specifications
GOST R 57430-2017: Pipes, fitting from ductile iron with spherical graphite and their connections for trade oil pipelines. Specifications
GOST R 57517-2017: General-purpose aluminium and aluminium alloys drawn wire. Specifications
GOST R 57578-2017: Polymer composites. Method for determination of linear thermal expansion with a interferometry
GOST R 57605-2017: Ceramic composites. Test method of compression at elevated temperature
GOST R 57606-2017: Ceramic composites. Compression test method at normal temperature
GOST R 57638-2017: Polymer composites. Determination of the fracture resistance of adhesive joints under cleavage conditions by means of double cantilever beam and tapered double cantilever beam
GOST R 57686-2017: Ceramic composites. Determination of misalignment of grips of a testing machine
GOST R 57706-2017: Ceramic composites. Method of tension tests at elevated temperature
GOST R 57707-2017: Polymer composites. Test method for durability of adhesive joints by exposure to humidity and temperature under load
GOST R 57708-2017: Polymer composites. Method for determination of linear thermal expansion with a push-rod dilatometer
GOST R 57711-2017: Ceramic composites. Determination of characteristics fatigue loading with constant amplitude at high temperature
GOST R 57714-2017: Polymer composites. Determination of tensile creep, compressive creep and creep-rapture
GOST R 57715-2017: Polymer composites. Determination of izod impact strength
GOST R 57716-2017: Resources saving. Waste treatment. Types, requirements and test methods for plastics sacks for household solid waste collection
GOST R 57727-2017: Polymer composites. Determination of the nominal bearing strength under tension or compression loading
GOST R 57733-2017: Polymer composites. Test method for determination of inplane shear properties of hoop wound samples
GOST R 57734-2017: Polymer composites. Determination of impact energy to break sample
GOST R 57735-2017: Ceramic composites. Test method for open-hole tension testing of specimens at normal temperature
GOST R 57743-2017: Ceramic composites. Determination of thermal expansion
GOST R 57744-2017: Ceramic composites. Determination of the interlaminar shear strength at ambient temperature by the compression of double-notched test pieces and by the Iosipescu test
GOST R 57745-2017: Polymer composites. Determination of plane shear strength of laminates by short-beam method
GOST R 57748-2017: Composite polymers. Method for in situ determination of polymer network parameters of cross-linked ultra high molecular weight polyethylene in solvent
GOST R 57749-2017: Ceramic composites. Test method of flexural strength at normal temperature
GOST R 57750-2017: Polymer composites. Test method for creep properties of adhesives in shear
GOST R 57751-2017: Polymer composites. Test method of determination of adhesives in cleavage peel by tension loading
GOST R 57752-2017: Ceramic composites. Determination of characteristics fatigue loading with constant amplitude at normal temperature
GOST R 57753-2017: Polymer composites. Test method for determination of apparent interlaminar shear strength of pultruded glass composite rods
GOST R 57754-2017: Polymer composites. Test method for determination of linear thermal expansion by thermomechanical analysis
GOST R 57778-2017: Polymer composites. Determination of in-plane shear properties by the rail shear method
GOST R 57802-2017: Ceramic composites. Test method for determination of transthickness tensile strength at ambient temperature
GOST R 57834-2017: Polymer composites. Standard test method for shear strength of single-lap-joint adhesively bonded
GOST R 57840-2017: Ceramic composites. Determination of interlaminar shear strength at elevated temperatures
GOST R 57857-2017: Ceramic composites. Determination of axial tensile strength and stress-strain response performed on cylindrical specimens at normal temperature under monotonic loading
GOST R 57860-2017: Polymer composites. Determination of shear strength by punch tool method
GOST R 57864-2017: Polymer composites. Test method for determination of through-thickness flatwise tensile strength and elastic modulus
GOST R 57865-2017: Polymer composites. Normalization of physical-mechanical properties depending on of reinforcing filler
GOST R 57866-2017: Polymer composites. Determination of flexural properties
GOST R 57867-2017: Polymer composites. Test methods for determination of pull-through resistance
GOST R 57885-2017: Glassfiber reinforced thermosetting pipes and parts of pipelines. Determination of dimensions
GOST R 57922-2017: Ceramic composites. Test method for determination of mechanical characteristics under monotonic uniaxial tension at normal temperature
GOST R 57924-2017: Polymer composites. Methods for determination of flammability of the materials for used in aviation technics
GOST R 57926-2017: Ceramic composites. Test method for determination of axial tension-tension cyclic fatigue at constant amplitude and normal temperature
GOST R 57927-2017: Ceramic composites. Determination of oxidation resistanceof non-oxidemonolithic ceramics
GOST R 57928-2017: Polymer composites. Method of determining the rate of heat release during combustion, using a flow calorimeter, operating on the principle of thermocouple
GOST R 57948-2017: Polymer composites. Test method of determination of impact resistance of unnotched sample
GOST R 57953-2017: Ceramics composites. Test Method for bond strength of ceramic materials
GOST R 57954-2017: Plastics. Determination of the mean-failure energy by Gardner method
GOST R 57968-2017: Polymer composites. Test method of samples for shearing
GOST R 57971-2017: Ceramic composites. Determination of tensile strength at the hoop tension at normal temperature on cylindrical samples with elastomeric inserts
GOST R 57991-2017: Trunk pipeline transport of oil and oil products. Steel piles of pipes used for foundation construction of above-ground pipelines supports. General specifications
GOST R 57994-2017: Polymer composites. Test methods for fracture toughness definition and energy release speeds
GOST R 58017-2017: Plastics. Determination of dynamic mechanical properties. Compression
GOST R 58064-2018: Steel welded pipes for building structure. Technical specifications
GOST R 58360-2019: Dish-shaped anchors for fastening a heat-insulating layer in facade heat-insulating composite systems with external plaster layers. Test methods
GOST R 58386-2019: Sheathed ropes for prestressed structures. Technical specifications
GOST R 58540-2019: Fire fighting equipment. Semi-rigid pressure fire hoses. General technical requirements. Test methods
GOST R 58915-2020: Rolled plates of cryogenic steels. Specifications
GOST R 58953-2020: Rolled sheet metal for folded roofs and facades. General specifications
GOST R 70235-2022: Cold-rolled strip of thermo-metals. Technical conditions
GOST R 70520-2022: Reinforcement for reinforced concrete structures. Methods for determining the mechanical properties at high temperatures
GOST R 70522-2022: Cellular concrete small wall blocks. Technical specifications
GOST R 70706-2023: Modified wood. Methods of determination of physical properties
GOST R 70707-2023: Compact units for treatment of domestic wastewater. General technical conditions
GOST R 70731.1-2023: Steel pipes for manufacturing of equipment and pipelines for nuclear power plants. General specifications. Part 1. Seamless steel pipes of non-alloy and alloy steels.
GOST R 70731.2-2023: Steel pipes for manufacture of equipment and pipelines of nuclear power plants. General technical conditions. Part 2. Seamless steel pipes from austenitic class steel of 08Х18Н10Т and 08Х18Н10Т-Ш grades
GOST R 70731.3-2023: Steel pipes for manufacture of equipment and pipelines of nuclear power plants. General technical conditions. Part 3. Longitudinal welded steel pipes of unalloyed and alloyed steel
GOST R 70731.4-2023: Steel pipes for manufacture of equipment and pipelines of nuclear power plants. General technical conditions. Part 4. Longitudinal welded steel pipes made of 08Х18Н10Т austenitic class steel.
GOST R 8.597-2003: State system of insuring the uniformity of measurements. Coaxial loads. Method of verification
GOST R IEC 60893-2-2023: Materials for electrical insulation. Industrial rigid laminated sheet materials based on thermosetting resins for electrical applications. Part 2. Test methods
GOST R ISO 230-1-2010: Machine tools tests. Part 1. Measurement techniques of geometrics parameters
GOST R ISO 3126-2007: Plastics piping systems. Plastics components of piping systems. Determination of dimensions
I 23 SD-80*: Instructions for flaw detection of pipe bends made of pearlite steel
MI 1384-86: GSE. Caliper with a handout model 124. Calibration method
MI 1729-87: State system for ensuring uniformity of measurements. Calibration lines. Method of verification
MI 1780-87: Guidelines. GSOEI. Tape exemplary and metal measuring tapes. Method of verification
MI 1799-87: Guidelines. Squares testing 90 degrees. Control method
MI 1904-88: Threaded cylindrical gauges. Methods of control
MI 1937-88: Gauges for taper connections. Methods of control
MI 2006-89: State system for ensuring uniformity of measurements. Depth gauge indicators. Verification procedure
MI 2018-89: State system for ensuring uniformity of measurements. Micrometric depth gauges. Method of verification
MI 2077-90: Micrometers with inserts
MI 2190-92: State system for ensuring uniformity of measurements. Shtangenreysmasy. Method of verification
MI 2194-92: State system for ensuring uniformity of measurements. Nutromera indicator with the price of division of 0.01 mm. Methods of verification
MI 2299-05: Recommendation. State system for ensuring uniformity of measurements. Electromagnetic heat meters, flow meters and flow meters. Method of testing using the installation "Thread-T" (firmware version 2005)
MI 2299-2001: State system for ensuring uniformity of measurements. Electromagnetic heat meters, flow meters and flow meters. Method of verification
MI 2314-2000: Recommendation. GSOEI. Codifier of groups of measuring instruments
MI 2585-2000: State system for ensuring uniformity of measurements. Diaphragm measuring piping. Primary calibration technique
MI 2638-2001: State system for ensuring uniformity of measurements. Chamber and tubeless diaphragms installed in flanged connections of measuring pipelines. Dimensional control methods for the primary and periodic calibration of measuring systems with restricting devices
MI 424-84: State system for ensuring uniformity of measurements. Shtangenreissmass arrow model BV-6226. Methods and means of verification
MI 524-2010: State system for ensuring uniformity of measurements. Shtangenzubomery with vernier SHZN-18, SHZN-40. Method of verification
MP 001-06-2012: Micrometers MK, ML, MT, MZ. Verification Method
MP 203-9-2020: Squares testing 90 degrees of the Calibron trademark. Verification method
MU 0898-00.001: Methods of conducting non-destructive testing of hooks of lifting and transport equipment (automobile, tractor, trailer cranes and crane beams)
MU 2002-2002: Methodology for examining the technical condition of cabinet elevators for drill and casing KM type and cast elevators for casing EN type to determine the possibility of their further operation
NPB 173-98*: Helmets are fire. General technical requirements. Test methods
ODM 218.5.007-2016: Guidelines for determining the modulus of elasticity of a static stamp
OST 1 90113-86: Pressed sections of aluminium alloys. Specifications.
OST 108.033.01-86: mechanical stokers. Technical conditions.
OST 14-11-196-86: Thin-sheet roof rolled plate. Specifications.
OST 17-113-2002: Ribbons colored for belts. Specifications
OST 24.090.39-83: Shell stacker cranes. General specifications.
OST 26.260.454-99: Spiral wound gasket. Types and dimensions. General specifications.
OST 68-16-02: Cartographic instruments. General specifications
PNAE G-7-016-89: Standardized methods of control of basic materials (semifinished products), welded joints and cladding of equipment and of pipelines of NPP. Visual and a measuring control
PNST 38-2015: Nanomodified carbon hydratecellulose fibre. Specifications
PNST 391-2020: High-strength steel packaging tape. Technical specifications
PNST 394-2020: Steel pipes for the manufacture of equipment and pipelines of nuclear plants. General specifications. Part 1. Seamless steel pipes from unalloyed and alloyed steels
PNST 453-2020: Steel pipes for the manufacture of equipment and pipelines for nuclear power plants. General technical conditions. Part 2. Seamless steel pipes of austenitic steel grades 08Х18Н10Т and 08Х18Н10Т-Ш
PNST 454-2020: Steel pipes for the manufacture of equipment and pipelines for nuclear power plants. General technical conditions. Part 3. Longitudinal welded steel pipes of unalloyed and alloyed steel
PNST 455-2020: Steel pipes for the manufacture of equipment and pipelines for nuclear power plants. General technical conditions. Part 4. Longitudinal welded steel pipes made of austenitic steel grade 08Х18Н10Т
PNST 456-2020: Steel pipes for the manufacture of equipment and pipelines for nuclear power plants. General technical conditions. Part 5. Longitudinal welded cold-worked steel pipes of austenitic class steel
PNST 683-2023: Oil and gas industry. Underwater production systems. Tubes from austenitic-ferritic corrosion-resistant steel. Technical specifications
PR 32 TsSh 001-2001: Rules for metrology. Methodical instructions. Metrological support of control patterns for linear parameters of sorting slide retarders
PR 32.131-98: Rules for Metrology. Typical training program for calibrators measuring instruments of geometric quantities in railway transport
R 3112199-0254-92: Time sheet of technological equipment for ATP of various capacities of TC and BTW
R 50-60-88: Recommendations. Unified system of technological documentation. Rules for registration of documents on the technological processes of repair
RD 15-12-2007: Methodical instructions on the procedure for testing steel ropes at cable test stations
RD 15-13-2008: Guidelines for the examination of industrial safety of compressor installations used in coal mines and mines
RD 15-14-2008: Guidelines for the examination of the industrial safety of single-bucket excavators
RD 16.407-2000: Explosionproof electrical apparatus. Repair
RD 34.10.102-91: Specified Quantity Allowances for Means of Mechanization, Special Accessories, and Tools for Overhaul of Main Energy Equipment of Thermal Power Stations
RD 34.10.103: Industry-Specific Specified Quantity Allowance for Tools, Equipment, Materials, and Aids for Repair and Rehabilitation of Gas Cleaning Equipment of Thermal Electric Powers
RD 34.10.130-96: Instructions for visual and measuring control.
RD 34.17.425-86: Procedural Guidelines for X-Ray Detection of Macrodamage to Metal in Circulation Piping and Housing Equipment of Electric Power Generating Stations
RD 34.30.605: Process instruction for replacement of steam turbine blades
RD 34.35.606: General Guide to Overhaul of Thermal Automation and Measuring Equipment
RD 34.35.618: Explosionproof Indicating Electrical Contact Pressure Gauges Type VE-16rb. Guide to Overhaul
RD 34.39.601: Guide to Repair of Fittings for Piping Systems at Pressure of 64-100 kgf/sq. cm
RD 34.47.602-75: Guidelines for the overhaul of the VMD-35 oil circuit breaker
RD 52.08.658-2004: Guidelines. Verification scheme for means of measuring water level
RD-15-15-2008: Guidelines on the procedure for conducting industrial safety expertise of mine electric locomotives
RK 34-38-025-87: Guide to Overhaul of Indicating Pressure Gauges for Precise Measurements Type MTI
RST RSFSR 195-82: Writing pins. Technical conditions
RTM 17-03-2005: Guiding technical materials on the design, manufacture and use of steel fiber concrete structures on steel wire fiber
RTM 5-05-2009: Guiding technical materials for the design, manufacture and use of steel fiber concrete structures on the fiber of thin steel wire
RTM 68-14.33-91: Manufacturing technology of plastic globes with a diameter of 210 mm
SP 42-103-2003: Design and construction of polyethilene gas pipelines and renovation of underground gas pipelines
ST RK 2651-2015: Containers made of polypropylene. Specifications.
ST SSFZhT TsT 052-99: Shoes and brake pads for locomotives running on main railways. Standard testing method.
ST TsKBA 015-2005: Pipe fittings. The program of quality control of fittings of nuclear power plants
ST TsKBA 019-2012: Pipe fittings. Thermally expanded graphite based seals. General technical requirements
ST TsKBA 021-2004: Painting and conservation of pipeline valves and drive devices for it supplied for nuclear power plants. Typical technological instructions for cleanliness, dyeing and conservation
ST TsKBA 099-2011: Pipe fittings. Repairs. Organization of repair and general repair manual
STB 1517-2004: Plastic consumer packaging. General specifications
STB 1520-2008: Materials for the horizontal marking of roads. Technical conditions
STB 1963-2009: Noodles. General specifications
TU 102-390-85: Vibrational low-frequency platforms with spatial oscillations of the HSV type
TU 1211-205-46854090-2005: Steel wire fiber for concrete reinforcement
TU 1221-002-95751815-2009: Fiber from thin steel wire. Technical conditions
TU 13.03-011-00212179-2003: Spiral-welded electric-welded pipes made of carbon steel 20 for pipelines of nuclear power plants. Technical conditions
TU 1317-006.1-593377520-2003: Steel seamless oil and gas pipelines of increased operational reliability for the field construction of TNK OJSC
TU 1381-003-47966425-2006: Steel electric-welded steel pipes with an outer diameter of 610 - 1420 mm for gas pipelines for operating pressures up to 9.8 MPa
TU 14-11-262-89: Cold-Rolled Thin-Sheet Roofing Products
TU 14-158-116-99: Steel electric-welded longitudinal pipes of increased corrosion resistance and cold resistance for gas and oil pipelines
TU 14-2-767-88: Hot-rolled steel strip with improved quality. Technical conditions
TU 14-3-1401-86: Seamless cold-deformed pipes of steel grade 02Х18Н11
TU 14-3-1428-86: Electric-Welded Straight-Seam Steel Pipes 1020 mm in Diameter for Gas and Oil Pipelines. Technical Specifications
TU 14-3-1573-96: Steel electric welded longitudinal pipes with a diameter of 530-1020 mm with a wall thickness of up to 32 mm for main gas pipelines, oil pipelines and oil product pipelines
TU 14-3-1760-91: Seamless Steel Pipes, Hot Deformed, Higher Precision
TU 14-3-190-2004: Seamless steel pipes for boiler plants and pipelines
TU 14-3-1972-97: Seamless hot-deformed oil and gas pipes of increased corrosion resistance and cold resistance. Technical conditions
TU 14-3-377-99: Steel welded longitudinal welded pipes for main gas and oil pipelines
TU 14-3-460:2009: Seamless steel pipes for steam boilers and pipelines. Technical conditions
TU 14-3R-1471-2002: Northern-straight-seam electric-welded pipes for arranging oil and gas fields, main gas pipelines, oil and oil product pipelines of field pipelines. Technical specifications
TU 14-3R-197-2001: Seamless pipes made of corrosion-resistant steel with high surface quality. Technical conditions
TU 14-3R-251-2007: Seamless steel pipes for chemical and petrochemical plants with conditional pressure Py = 19.6 - 98 MPa (200 - 1000 kgf/cm2)
TU 14-3R-55-2001: Seamless steel pipes for steam boilers and pipelines
TU 14-3R-56-2001: Welded steel pipes with a diameter of 1420, 1620, 1720, 2020 and 2220 mm for general use. Technical conditions
TU 14-3R-63-2002: Steel pipes lined with polyethylene pipes. Technical specifications
TU 14-4-1431-87: AP-AN4 Activated Welding Wire. Technical conditions
TU 14-4-1731-92: Dowel-nails with zinc coated washers. Technical conditions
TU 1469-006-01297858-02: Specifications cold bending curves from steel electric-welded pipes with diameters of 720-1020 mm with insulating coating for main pipelines
TU 146930-08-01297858-05: Specifications for cold bending curves from steel electric-welded pipes with diameters of 530 and 1220 mm with insulating coating for main pipelines
TU 2245-011-44271562-2004: Cuff thermo-shrinkable "Therma-STMP". Technical conditions
TU 2245-017-44271562-2005: Polymer tape "Terma-P". Technical conditions
TU 2248-048-00203536-98: Polyethylene pipes for high pressure gas pipelines (up to 1, 2 MPa). Technical conditions
TU 2293-004-44271562-2004: Cuff the thermosetting "Terma-STMP"
TU 34-38-20111-96: Centrifugal pump TsN-400-105-U4 (3B-200x2). Technical conditions for repair
TU 34-38-20140-94: Valves of gas pipelines TPP. General technical conditions for major repairs
TU 34-38-20201-94: Stationary steam boilers. Piping within the boiler. General technical conditions for major repairs
TU 34-38-20202-94: Stationary steam boilers. Collectors. General technical conditions for major repairs
TU 34-38-20219-94: Economizers smooth tube steam stationary boilers. Technical conditions for major repairs
TU 34-38-20222-94: Steam superheaters of stationary steam boilers. Technical conditions for major repairs
TU 34-38-20310-96: Centrifugal multistage sectional pumps CNS 180-85 ... 425. Technical conditions for repair
TU 34-38-20365-94: Power valves. General technical conditions for major repairs
TU 3742-001-10995136-98: All-welded ball valves. Technical conditions
TU 48-1-73-88: Feeder feeders from platinum metals and alloys. Technical conditions
TU 5728-006-93978201-2008: Sealing gaskets made of thermally expanded graphite (PUTG). Technical conditions
TU 5913-001-58455567-2004: Low-Emission Glass with Soft Coating
TU 6-19-215-83: Pipes for electrical wiring. Smooth unplasticized polyvinyl chloride. Technical conditions
TU 63-178-112-87: Film from recycled polyvinyl chloride raw material for road construction "Armodor-2". Technical conditions
TU 6-49-14-89: Connecting parts from high-pressure polyethylene for pressure pipes
TU 68-2.211-91: Plastic globe (diameter 210 mm). Technical conditions
TU 95 1613-01: Polyethylene heat shrink tubes. Technical conditions
TU 9557-010-02570823-97: Cartographic products. Plastic globe (diameter 320 mm)
TU 9558-005-02570823-96: Cartographic products. Embossed cards
VSN 8-94: Industry-Specific Building Code for Installation of Domestic Water Supply Systems Equipped with Water Meters, Backflow/Distribution Valves, and Flexible Connectors for Plumbing Fixtures
Customers Who Viewed This Item Also Viewed:
|
Limit dimension deviation from 0,1 to 10000 mm and surface shape and arrangement allowances, not specified on drawings.
Language: English |
Rules of development, coordination, approval and composition of technical and economic assessment for construction
Language: English |
Mineral fertilizers. Method for determination of dynamic strength and attrition
Language: English |
Diesel fuel EURO. Specifications
Language: English |
Inch thread with a profile angle of 55 degrees
Language: English |
Vessels and apparatus. Norms and methods of strength calculation. General requirements
Language: English |
Norms of structural design of nuclear power plants with reactors of different types
Language: English |
|
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.