GOST R 52361-2005
ГОСТ Р 52361-2005
|
|
Analytical control of the object. Terms and definitions
Контроль объекта аналитический. Термины и определения
Status: Effective - Introduced for the first time till 09/01/2019. IUS 10-2005
The standard establishes terms and definitions of concepts in the field of analytical control of objects. The terms established by the standard are recommended for use in all types of documentation and literature in the field of analytical control that fall within the scope of standardization work and / or use the results of these flows.
Стандарт устанавливает термины и определения понятий в области аналитического контроля объектов. Термины, установленные стандартом, рекомендуются для применения во всех видах документации и литературы в области аналитического контроля, входящих в сферу работ по стандартизации и (или) использующих результаты этих раюот.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
7/14/2005
SKU: RUSS64873
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
01 General. Terminology. Standardization. Documentation »
PromExpert »
SECTION V. ENVIRONMENTAL PROTECTION. NATURE USE »
I Environmental-legal and economic-legal mechanisms for environmental protection »
1 Management infield of environmental protection and environmental management »
1.5 Environmental monitoring and control »
PromExpert »
SECTION II. METROLOGICAL »
I Organizational and technical bases of metrological support »
1 Organization and management of metrological support »
1.1 Basic provisions of metrological support »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
3 Activities of testing laboratories »
3.1 Basic requirements for testing laboratories and their activities »
ISO classifier »
01 GENERAL PROVISIONS. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION »
01.040 Dictionaries »
01.040.17 Metrology and Measurements. Physical phenomena (Dictionaries) »
National standards »
01 GENERAL PROVISIONS. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION »
01.040 Dictionaries »
01.040.17 Metrology and Measurements. Physical phenomena (Dictionaries) »
National Standards for KGS (State Standards Classification) »
Latest edition »
T General technical and organizational and methodological standards »
T0 General technical and metrological terms, designations and values »
T00 General technical terms, symbols and quantities »
The Document is Replaced With:
GOST R 52361-2018: Analytical control of the object. Terms and definitions
The Document References:
GOST R 1.0-2004: Standardization in the Russian Federation. Basic provisions
The Document is Referenced By:
FR 1.31.2014.17407: Quantitative chemical analysis of atmospheric air and air emissions. Method for measuring the mass concentration of polychlorinated dibenzo-p-dioxins and dibenzofurans in industrial emissions into the atmosphere by chromatography-mass spectrometry (2014)
GOST 28353.1-2017: Silver. Method of ark atomic-emission analysis
GOST 28353.2-2017: Silver. Method of inductively coupled plasma atomic-emission analysis
GOST 32279-2013: Iron ores, concentrates, agglomerates and pellets. Method for determination of hygroscopic water content
GOST 32517.1-2013: Iron ores, concentrates, agglomerates and pellets. Methods for the determination of total iron
GOST 32518.1-2013: Iron ores, concentrates, agglomerates and pellets. Determination of silica gravimetric method
GOST 32518.2-2013: Iron ores, concentrates, agglomerates and pellets. Determination of silica spectrophotometric method
GOST 32520-2013: Iron ores, concentrates, agglomerates and pellets. General requirements to the methods of chemical analyses
GOST 32599.1-2013: Iron ores, concentrates, agglomerates and pellets. Determination of sulfur content. Barium sulfate gravimetric method
GOST 34369-2017: Silver. Method of spark atomic-emission analysis
GOST R 51352-2013: In vitro diagnostic medical devices. Test methods
GOST R 52730-2007: Drinking water. Methods for determination of 2,4-D
GOST R 52963-2008: Water. Methods for determination of alkalinity, and mass concentration of carbonates and hydrocarbonates
GOST R 53133.2-2008: Medical laboratory technologies. Quality control of clinical laboratory tests. Part 2. Rules for intra-laboratory quality control of quantitative methods of clinical laboratory tests using control materials
GOST R 53133.3-2008: Medical laboratory technologies. Quality control of clinical laboratory tests. Description of materials for quality control of clinical laboratory investigations
GOST R 53198-2008: Ores and concentrates of non-ferrous metals. General requirements for methods of chemical analysis
GOST R 53293-2009: Fire hazard of substances and materials. Materials, substance and fire protective means. Identification by thermal analysis methods
GOST R 53372-2009: Gold. Methods of analysis
GOST R 53403-2009: Iron ores, concentrates, agglomerates and pellets. Method for the determination of titanium content
GOST R 53657-2009: Iron ores, concentrates, agglomerates and pellets. Method for determination of divalent iron calculated as ferrous oxide
GOST R 53658-2009: Iron ores, concentrates, agglomerates and pellets. Atomic absorption method for determination of copper content
GOST R 53659-2009: Iron ores, concentrates, agglomerates and pellets. Atomic absorption method for determination of total manganese calculated as protoxide
GOST R 53859-2010: Refractory alumosilicate mortars. Specifications
GOST R 54153-2010: Steel. Method of atomic emission spectral analysis
GOST R 54313-2011: Palladium. Method of inductively coupled plasma atomic-emission analysis
GOST R 54335-2011: Palladium. Method of spark atomic-emission analysis
GOST R 54503-2011: Water. Method for determination of polychlorinated biphenyls
GOST R 54519-2011: Organic fertilizers. Methods of sampling
GOST R 54651-2011: Organic fertilizers on basis of sewage sludge. Specifications
GOST R 54653-2011: Organic fertilizers. Methods of microbiological analysis
GOST R 55080-2012: Cast iron. Method of X-ray fluorescence (XRF) analysis
GOST R 55410-2013: Refractory. Analysis by X-ray fluorescence (XRF)
GOST R 55450-2013: Organic fertilizers. Method for determination of bulk density
GOST R 55451-2013: Organic fertilizers. Methods for the determination of mass density
GOST R 55571-2013: Organic fertilizers on basis of solid domestic waste. Specifications
GOST R 55684-2013: Drinking water. Methods for the determination of permanganate index
GOST R 55685-2013: Blister copper. Methods of analysis
GOST R 55991.1-2014: In vitro diagnostics medical devices. Part 1. Automatic analysers for biochemical assays. Technical requirements for public procurement
GOST R 55991.4-2014: In vitro diagnostics medical devices. Part 4. Automatic analysers for coagulation tests. Technical requirements for public procurement
GOST R 55991.6-2014: In vitro diagnostics medical devices. Part 6. Automatic analysers for haematology tests. Technical requirements for public procurement
GOST R 56142-2014: Silver. Method of ark atomic-emission analysis
GOST R 56157-2014: Soil. Procedures (methods) of analysis of composition and properties of soil samples. General requirements for development
GOST R 56219-2014: Water. Determination of 62 elements by inductively coupled plasma mass spectrometry (ICP-MS) method
GOST R 56226-2014: Resources saving. Sewage sludge. Methods of sampling and sample preparation
GOST R 56306-2014: Silver. Method of inductively coupled plasma atomic-emission analysis
GOST R 56307-2014: Silver. Method of spark atomic-emission analysis
GOST R 56308-2014: Silver. Method of atomic-absorption analysis
GOST R 57075-2016: Methodology and criterions of identification for best available techniques activity water use
GOST R 57103-2016: Specialized food products. Methods of sampling, detection and determination of nanoparticles and nanomaterials in the composition of agricultural and food products
GOST R 57107-2016: Specialized food products. Order to the detection and identification of nanomaterials in plants
GOST R 57108-2016: Specialized food products. Order to control the content of nanomaterials in food
GOST R 57111-2016: Specialized food products. Order to control the content of nanomaterials used in agriculture
GOST R 57165-2016: Water. Determination of elements by inductively coupled plasma atomic emission spectrometry
GOST R 57849-2017: Bee products. Sample preparation for the determination of pesticides chromatographic methods
GOST R 58587-2019: Isotope analysis in agroecological studies. Terms and Definitions
GOST R 8.703-2010: State system for ensuring the uniformity of measurements. Nuclear material control and accounting. Measurement system. Main principles
GOST R 8.878-2014: State system for ensuring the uniformity of measurements. Nuclear material control and accounting. System of measurements. Estimation of uncertainty in the sampling
GOST R ISO 16000-7-2011: Indoor air. Part 7. Sampling strategy for determination of airborne asbestos fibre concentrations
ITS 22.1-2016: General principles of industrial environmental control and its metrological support
M 15-2010: Recommendation. General requirements for quantitative chemical analysis
M 16-2019: Recommendation. Solutions used in quantitative chemical analysis. Preparation and Control Requirements
M 24-2012: Recommendation. Certification of methods (methods) of measurements of indicators of the composition and properties of objects of metallurgical production, industrial environmental monitoring, environmental monitoring, chemical factors of the industrial en
MI 2427-2016: Recommendation. State system for ensuring uniformity of measurements. Assessment of measurement status in test, measurement and production and analytical control laboratories
MI PrV-2015/1: Industrial emissions of pollutants into the atmosphere. Method for measuring the mass concentration of sulfur dioxide in gases organized by IZA (photometric method)
MI PrV-2015/3: Industrial emissions of pollutants into the atmosphere. Method for measuring the mass concentration of dust in gases organized by IZA
MI PrV-2015/4: Industrial emissions of pollutants into the atmosphere. Method for measuring the mass concentration of solid fluorides in gases organized by IZA (potentiometric method)
MI PrV-2016/1: Industrial emissions of pollutants into the atmosphere. Method for measuring the mass concentration of aluminum oxide in gases organized by IZA
MI PrV-2016/4: Industrial emissions of pollutants into the atmosphere. Method for measuring the mass concentration of hydrogen fluoride in gases organized by IZA (photometric method)
MI PrV-2016/5: Industrial emissions of pollutants into the atmosphere. Method for measuring the mass concentration of chlorine in gases organized by IZA (photometric method)
MI PrV-2017/1: Industrial emissions of pollutants into the atmosphere. Method for measuring the mass concentration of resinous substances in gases organized by IZA (gravimetric method)
MR 1.2.2640-10: Sampling methods, detection and determination of the content of nanoparticles and nanomaterials in the composition of agricultural, food products and packaging materials
MRR 3.2.76-11: Method of determining the cost of developing land surveying projects carried out with the involvement of the budget funds of the city of Moscow
MU 08-47/262: Underground water. Methods for measuring the mass concentration of carbonate-, bicarbonate ions and free carbonic acid using titrimetric and potentiometric methods
MU 2.6.5.032-2017: Control of radioactive contamination of surfaces
PND F 13.1.65-08: Quantitative chemical analysis of atmospheric air and air emissions. Methods for measuring the total content of polychlorinated dibenzo-p-dioxins and dibenzofurans in terms of 2, 3, 7, 8-tetrachlorodibenzo-p-dioxin in samples of industrial emissions into the atmosphere by chromato-mass spectrometry
PND F 13.1.66-09: Methods for measuring the mass concentration of elements (zinc, copper, nickel, manganese, lead, cadmium, chromium, iron, aluminum, titanium, cobalt, calcium, magnesium) in industrial emissions using inductively coupled plasma atomic emission spectrometry
PND F 13.2.3.67-09: Methods for measuring the mass concentration of elements (zinc, copper, nickel, manganese, lead, cadmium, chromium, iron, aluminum, titanium, cobalt) in the atmospheric air of populated areas, air at sanitary inductively coupled plasma emission spectromet
PND F 13.2:3.64-08: Methods of measuring the mass concentration of polychlorinated dibenzo-p-dioxins and dibenzofurans in atmospheric air and working area air chromatography-mass spectrometry
PND F 13.3.64-08: Quantitative chemical analysis of atmospheric air and air emissions. Methods for measuring the total content of polychlorinated dibenzo-p-dioxins and dibenzofurans in terms of 2, 3, 7, 8-tetrachlorodibenzo-p-dioxin in atmospheric air samples using chromatography-mass spectrometry
PND F 14.1:2:4.251-08: Quantitative chemical analysis of water. Methods for measuring the total content of polychlorinated dibenzo-p-dioxins and dibenzofurans in terms of 2,3,7,8-tetrachlorodibenzo-p-dioxin in samples of drinking, surface natural and treated waste water using chromatography-mass spectrometry
PND F 16.1:2:2.2.56-08: Quantitative chemical analysis of soil. Methods for measuring the total content of polychlorinated dibenzo-p-dioxins and dibenzofurans in terms of 2, 3, 7, 8-tetrachlorodibenzo-p-dioxin in soil, soil, bottom sediment samples using chromatography-mass spectrometry
PND F 16.1:2:2.2:3.56-08: Quantitative chemical analysis of soil and waste. Methods of measuring the mass fraction of polychlorinated dibenzo-p-dioxins and dibenzofurans in soils, soils, silts, sediments, sludges, fly ash using chromatography-mass spectrometry
R 50.2.074-2010: State system for ensuring the uniformity of measurements. Requirements for the competence of legal persons and individual entrepreneurs, accredited for the works on certification of measurement procedures, used in analytical control
R 50.2.090-2013: State system for ensuring the uniformity of measurements. Quantitative chemical analysis procedures. General requirements for development, certification and application
RB 154-19: Safety Guide for the Use of Atomic Energy "Recommendations on the application of the radionuclide ratio method for determining the content of complexly detected radionuclides in the radioactive waste of nuclear fuel cycle enterprises"
RD 52.04.893-2020: Mass concentration of suspended solids in atmospheric air samples. Gravimetric measurement technique
RD 52.04.894-2020: Mass concentration of hydrogen fluoride and solid soluble fluorides from one sample of atmospheric air. Photometric Measurement Procedure Using Xylene Orange
RD 52.10.728-2010: Basic requirements for the competence of laboratories in monitoring the status and pollution of sea water. State Oceanographic Institute (GOIN)
RD 52.10.777-2012: Internal quality control of information on the state and pollution of the marine environment
RD 52.11.679-2006: Guidelines. Comprehensive assessment of possible harmful levels of environmental impact when working on active impacts on hydrometeorological and geophysical processes. Central Aerological Observatory (CAO)
RD 52.18.827-2016: Mass fraction of mercury in samples of soil, ground, bottom sediments and biomaterial. Measurement procedure by cold vapour atomic absorption spectroscopy
RD 52.18.843-2017: Mass fraction of mercury in organic compounds in samples of soils, bottom sediments and biological material. Measurement procedure by atomic absorption spectroscopy of "cold steam"
RD 52.44.589-2016: Mass concentration of priority components of polycyclic aromatic hydrocarbons in atmospheric air samples. Measurement technique by high performance liquid chromatography
RD 52.44.593-2015: Mass concentration of heavy metals in atmospheric air. Measurement technique by atomic absorption spectrometry with flameless atomization
RD 52.44.594-2016: Mass concentration of heavy metals in precipitation and surface waters. Measurement technique by atomic absorption spectrometry with flameless atomization
SP 432.1325800.2019: Fireproof coatings. Condition Monitoring
Customers Who Viewed This Item Also Viewed:
 |
State system for ensuring the uniformity of measurements. Measurements of liquids and gases flow rate and quantity by means of orifice instruments. Part 5. Measurement procedure
Language: English |
Petroleum products. Method for measurement of viscosity by automatic capillar viscosimeter
Language: English |
Greases. Method for determination of ultimate strength and thermostrengthening
Language: English |
Electric heating devices for heating rolling stock railways. Safety requirements and test methods
Language: English |
Ice cream. General technical requirements
Language: English |
Pipe fittings. Ball valves made of brass. General specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.