GOST R 52491-2005
ГОСТ Р 52491-2005
|
|
Coating materials, used in building. General specifications
Материалы лакокрасочные, применяемые в строительстве. Общие технические условия
Status: Not effective - Canceled. Registration information 867-st dated 07/06/2015 (the official website of Rosstandart); IUS 2-2016
This standard applies to paints and varnishes (paintwork materials) used in construction for finishing buildings and structures (concrete, reinforced concrete, plastered, brick, metal, wood and other surfaces), and establishes general technical requirements for paintwork materials, their basis and test methods
Настоящий стандарт распространяется на лакокрасочные материалы (ЛКМ), применяемые в строительстве для отделки зданий и сооружений (бетонных, железобетонных, оштукатуренных, кирпичных, металлических, деревянных и др. поверхностей), и устанавливает общие технические требования к ЛКМ, потребительские и эксплуатационные характеристики покрытий на их основе и методы испытаний
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
12/30/2005
SKU: RUSS64880
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
6. Regulatory documents for building materials and products »
k.66 Finishing and facing materials »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.9 Testing and control of chemical and industrial products »
4.9.3 Products of paint and varnish industry »
ISO classifier »
87 PAINT AND VARNISHING INDUSTRY »
87.040 Paints and varnishes »
National standards »
87 PAINT AND VARNISHING INDUSTRY »
87.040 Paints and varnishes »
National Standards for KGS (State Standards Classification) »
Latest edition »
L Chemical products and rubber-asbestos products »
L1 Inorganic chemical products »
L18 Pigments and paints »
National Standards for KGS (State Standards Classification) »
Latest edition »
L Chemical products and rubber-asbestos products »
L2 Organic Chemical Products »
L24 Varnish and enamel »
National Standards for KGS (State Standards Classification) »
Latest edition »
L Chemical products and rubber-asbestos products »
L2 Organic Chemical Products »
L25 Organic solvents, drying oils, primers »
The Document References:
Federal Law 184-FZ: About technical regulation
GN 2.1.5.1315-03: Maximum allowable concentrations (MACs) of chemicals in the water of water objects used for drinking and domestic recreation purposes
GN 2.1.5.1316-03: Tentative allowable levels (TALs) of chemical substances in water objects of domestic, culinary and cultural, welfare water usage
GN 2.1.6.1338-03: Maximum allowable concentrations (MACs) of pollutants in the air of residential areas
GN 2.1.6.1339-03: Tentative safe exposure levels (TSELs) of pollutants in the air of residential areas
GN 2.2.5.1313-03: Maximum allowable concentrations (MACs) of harmful substances in occupational air
GN 2.2.5.1314-03: Tentative safe exposure levels (TSELs) of harmful substances in the occupational air
GOST 12.1.005-88: General sanitary requirements for working zone air
GOST 12.1.044-89: Fire and explosion hazard of substances and materials. Nomenclature of indices and methods of their determination
GOST 12.3.005-75: Painting works
GOST 12.3.035-84: Construction. Painting. Safety requirements
GOST 12.4.021-75: Ventilation systems. General requirements
GOST 14192-96: Cargo marking
GOST 15140-78: Paintwork materials. Methods for determination of adhesion
GOST 17537-72: Paint materials. Methods for the determination of the content of volatile and non-volatile matters, hard and film-forming materials
GOST 19007-73: Paintwork materials. Method for determination of drying time and degree
GOST 19433-88: Dangerous goods. Classification and marking
GOST 20811-75: Paintwork materials. Methods for coating abrasion test
GOST 21903-76: Paint materials. Methods of relative light-fastness determination
GOST 25898-83: Building materials and products. Methods of steam-tightness determination
GOST 28246-89: Paints and varnishes. Terms and definitions
GOST 28574-90: Corrosion protection in construction. Concrete and reinforced concrete constructions. Methods of the protection covers adhesion testing
GOST 30884-2003: Ready-mixed oil paints. General specifications
GOST 4765-73: Pain and lacquer materials. Method of determination impact resistance
GOST 5233-89: Paint materials. Method for determination of coating hardness pendulum instrument
GOST 6806-73: Paint and lacquer materials. Method for determination of film elasticity in bending
GOST 8420-74: Paint and lacquer materials. Method for determination of relative viscosity
GOST 8784-75: Paint materials. Methods for determination of hiding power
GOST 8832-76: Paintwork materials. Methods for formation of paint coating for testing
GOST 9.401-91: Unified system of corrosion and ageing protection. Paint coatings. General requirements and methods of accelerated tests on resistance to the action of climatic factors.
GOST 9.403-80: Unified system of corrosion and ageing protection. Paint coatings. Test methods for resistance to liquid static effect
GOST 9825-73: Paint materials. Terms, definitions and designations
GOST 9980.1-86: Paint materials. Rules of acceptance
GOST 9980.2-86: Paint materials. Test sampling
GOST 9980.3-86: Paint materials. Packing
GOST 9980.4-2002: Paint materials. Marking
GOST 9980.4-86: Paint materials. Marking
GOST 9980.5-86: Paint materials. Transportation and storage
GOST R 1.0-2004: Standardization in the Russian Federation. Basic provisions
GOST R 51691-2000: Paint materials. Enamels. General specifications
GOST R 52020-2003: Water dispersible paint materials. General specifications
GOST R 52165-2003: Paint materials. Varnishes. General specifications
OND-86: Methodology for calculating atmospheric concentrations of harmful substances contained in enterprise emissions
SanPiN 2.1.6.575-96: Hygienic requirements for atmospheric air protection of the population aggregates
SanPiN 2.1.7.1322-03: Hygienic requirements regarding dumping and decontamination of industrial and consumable waste
SNiP 3.04.01-87: Insulation and finishing coatings
The Document is Referenced By:
GOST R 53223-2008: Chrysotile cement slabs for wall facing. Specifications
GOST R 53223-2016: Chrysotile cement slabs for wall facing. Specifications
RMD 12-21-2013 Sankt-Peterburg: Typical temporary means of fencing, arranging and decorating construction sites
SP 229.1325800.2014: Reinforced concrete structures of underground and utility systems. Protection against corrosion
SP 28.13330.2012: Corrosion protection of buildings structures. Updated living edition of SNiP 2.03.11-85
|
Customers Who Viewed This Item Also Viewed:
 |
Liquids for aircrafts systems. Method for determination thermo oxidizing stability and corrosion activity
Language: English |
Plastics structured-wall pipes and their fittings for sewerage systems outside the buildings. Specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.