GOST 1435-99

ГОСТ 1435-99

Bars, strips and reels of tool unalloyed steel. General specifications

Прутки, полосы и мотки из инструментальной нелегированной стали. Общие технические условия

Status: Effective - Supersedes. IUS 5-2001

The standard applies to forged bars and strips; Hot-rolled rods, strips and hanks, calibrated and with special surface finishing from tool non-alloyed (carbon) steel, as well as in terms of the norms of chemical composition - for ingots, billet, sheet, ta

Стандарт распространяется на кованые прутки и полосы; прутки, полосы и мотки горячекатаные, калиброванные и со специальной отделкой поверхности из инструментальной нелегированной (углеродистой) стали, а также в части норм химического состава - на слитки,

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 24

Approved: Gosstandart of Russia, 2/9/2001

SKU: RUSS65070

Price: $168.00




The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 77 Metallurgy »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.12 Testing and control of products of metallurgical industry » 4.12.4 Iron and steel products »

ISO classifier » 77 METALLURGY » 77.140 Iron and steel products » 77.140.60 Steel bars and wire rod »

National standards » 77 METALLURGY » 77.140 Iron and steel products » 77.140.60 Steel bars and wire rod »

National Standards for KGS (State Standards Classification) » Latest edition » V Metals and metal products » V3 Steel quality and high quality (quality stock) » V32 Rolled and shaped steel »


As a Replacement Of:

GOST 1435-90: Unalloyed tool steel bars, strips and coils

The Document References:

GOST 10243-75: Steel. Methods of test and estimation of macrostructure

GOST 103-76: Hot-rolled steel strip. Dimensions

GOST 1051-73: Calibrated quality steel

GOST 1133-71: Forged round and square steel. Dimensions

GOST 14955-77: Quality round steel with a special surface finish

GOST 1497-84: Metals. Methods of tension test

GOST 166-89: Vernier callipers. Specifications

GOST 1763-68: Steel. Methods for determination of decarbonised layer depth

GOST 18895-97: Steel. Method of photoelectric spectral analysis

GOST 21996-76: Cold-rolled heat treated steel-cord belt

GOST 2216-84: Adjustable smooth snap gauges

GOST 22536.0-87: Carbon steel and unalloyed cast iron. General requirements for methods of analysis

GOST 22536.1-88: Carbon steel and unalloyed cast iron. Methods for determination of general carbon and graphite

GOST 22536.2-87: Carbon steel and unalloyed cast iron. Methods for the determination of sulfur

GOST 22536.3-88: Carbon steel and unalloyed cast iron. Methods for determination of phosphorus

GOST 22536.4-88: Carbon steel and unalloyed cast iron. Methods for determination of silicon

GOST 22536.5-87: Carbon steel and unalloyed cast iron. Methods for determination of manganese

GOST 22536.7-88: Carbon steel and unalloyed cast iron. Methods for determination of chromium

GOST 22536.8-87: Carbon steel and unalloyed cast iron. Methods for determination of copper

GOST 22536.9-88: Carbon steel and unalloyed cast iron. Methods for determination of nickel

GOST 2283-79: Cold-rolled tape made of tool steel and spring steel

GOST 2590-88: Round steel bars. Dimensions

GOST 2591-88: Square Hot-rolled Steel Bars Dimensions

GOST 26877-91: Metal products

GOST 28033-89: Steel. Method of X-ray-fluorescent analysis

GOST 2879-88: Hot-rolled hexagonal steel. Range of sizes

GOST 3749-77: Checking 90° squares. Specifications

GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications

GOST 4405-75: Hot-rolled and wrought tool steel strips. Dimensions

GOST 5378-88: Vernier protractors. Specifications

GOST 6507-90: Micrometers. Specifications

GOST 7417-75: Calibrated round steel

GOST 7502-98: Measuring metal tapes. Specifications

GOST 7564-97: Rolled products general rules of samples, rough specimens and test pieces selection for mechanical and technological testing

GOST 7565-81: Iron, steel and alloys. Sampling for determination of chemical composition

GOST 7566-94: Metal products

GOST 8.326-89: State system for ensuring the uniformity of measurements. Metrological certification measuring instruments

GOST 8559-75: Square bar steel. Products sizes

GOST 8560-78: Calibrated hexahedral rolled stock

GOST 8817-82: Metals. Upsetting test method

GOST 9012-59: Metals. Method of Brinell hardness measurement

GOST 9013-59: Metals. Method of measuring Rockwell hardness

PR 50.2.009-94: The testing and approval procedure for the measurement instrumentation

The Document is Referenced By:

GOST 10110-87: Circles diamond

GOST 10234-77: Moderate strength flattened

GOST 1051-73: Calibrated quality steel

GOST 11042-90: Construction steel hammers. Specifications

GOST 11310-90: Asbestos cement pipes and couplings. Methods of test

GOST 11906-77: Spiral bevel and hypoid gear-shaping cutter heads. Specifications

GOST 12855-77: Rubber sheet for transformers. Specifications

GOST 13215-79: Thrust centers and semi-centers

GOST 13764-86: Cylindrical helical compression (tension) springs made of round steel. Classification

GOST 14740-69: Dowels. Design

GOST 14955-77: Quality round steel with a special surface finish

GOST 1513-77: Needle files. Technical conditions

GOST 15146-69: Thermal-treated steel tape for musical instrument reeds. Specifications

GOST 15598-70: Piano steel wire

GOST 15987-91: Wooden bodied planes

GOST 16135-70: Steel wire for calculating devices

GOST 16632-80: Quick-changing square punches. Construction and dimensions

GOST 16633-80: Oblong punches. Construction and dimensions

GOST 16638-80: Reinforced female dies with round hole. Construction and dimensions

GOST 16639-80: Female dies with round hole and flange. Construction and dimensions

GOST 16640-80: Reinforced female dies with round hole and flange. Construction and dimensions

GOST 16641-80: Quick-changing female dies with round hole. Construction and dimensions

GOST 16642-80: Female dies with square hole. Construction and dimensions

GOST 16643-80: Quick-changing female dies with square hole. Construction and dimensions

GOST 16644-80: Female dies with oblong hole. Construction and dimensions

GOST 16645-80: Quick-changing female dies with oblong hole. Construction and dimensions

GOST 16646-80: Female dies with elongated oblong hole. Construction and dimensions

GOST 17166-71: Accessory tool for metal-cutting machines. General technical requirements

GOST 17199-88: Fitter’s screwdrivers

GOST 17439-72: Adjustable pliers

GOST 17440-93: Sniper nose pliers

GOST 18259-72: Thrust centres with cone 1:10 and 1:7. Design and dimensions

GOST 18578-89: Builders axes. Specifications

GOST 19126-2007: Medical metallic instruments. General specifications

GOST 19671-91: Tungsten wire for light sources

GOST 2015-84: Fixed plain gauges. Technical requirements

GOST 2016-86: Thread gauges. Specifications

GOST 21996-76: Cold-rolled heat treated steel-cord belt

GOST 21997-76: Steel flattened strip of high strength

GOST 22025-76: Resistive silicon alloys. Specifications

GOST 2216-84: Adjustable smooth snap gauges

GOST 2283-79: Cold-rolled tape made of tool steel and spring steel

GOST 23.207-79: Ensuring of wear resistance of products. Testing of engineering materials for impact abrasive wear

GOST 23.212-82: Products wear resistance assurance. The method of testing materials for wear under shock under law temperature conditions

GOST 23.221-84: Products weak resistance assurance. Experimental evaluation of lubricants temperature stability at friction

GOST 2310-77: Steel bench hammers

GOST 2424-83: Grinding wheels

GOST 24360-2016: Shell and mills with inserted carbide teeth. Specifications

GOST 24672-81: Gauges for taper thread

GOST 25.602-80: Design calculation and strength testing. Methods of mechanical testing of polymeric composite materials. Test for compression properties at normal, elevated and low temperatures

GOST 26215-84: Hand-held wood-saws

GOST 26665-97: Metal bodies planes. Specification

GOST 27266-87: Molybdenum wire for light sources

GOST 27358-87: Press moulds for manufacturing of plastic items

GOST 28052-97: Titanium and titanium alloys. Methods of oxygen determination

GOST 28438-90: Disk milling cutters with mechanically clamped many-sided hard-alloy inserts

GOST 2849-94: Gauges for the instruments tapers

GOST 28844-90: Thermal sprayed coatings strenghtive and reductive. General requirements

GOST 31.1066.03-97: Central arbors for exact operations

GOST 31.111.42-83: Parts and subunits of modular work tools for metal-cutting machines

GOST 31.121.42-84: Elements and assemblies of universal built-up and re-adjustable equipment for metal-cutting machines

GOST 31.211.42-93: Elements and assembly units of detachable fixtures for assembly and welding

GOST 33260-2015: Pipeline valves. Мetals used in pipeline valves production. Basic requirements for choice of materials

GOST 33532-2015: Saws frame and tare with cutting elements, welded with stellate, for vertical sawmills. Specification

GOST 3449-84: Taps. Specifications

GOST 3749-77: Checking 90° squares. Specifications

GOST 4045-75: Hand-operated bench vice

GOST 4405-75: Hot-rolled and wrought tool steel strips. Dimensions

GOST 5210-95: Tool steel bars for files , rasps, chisels and groove chisels

GOST 5468-88: Needle wire

GOST 5497-80: Cold-rolled steel strip for saws of cotton-scrubbing machines

GOST 5524-75: Saws for vertical gang mills

GOST 5547-93: Engineer's and lineman's pliers. Specifications

GOST 5808-77: Half-side and side-and-face milling cutters with inserted carbide blades. Techical specifications

GOST 5984-99: Explosives. Methods for determination of brisance

GOST 6476-80: Files for sharpening wood saws. Specifications

GOST 7210-75: Hand-held metal-cutting shears

GOST 7211-86: Cold chisels

GOST 7212-74: Cape chisels

GOST 7213-72: Center punches

GOST 7214-72: Bench piercers

GOST 7236-93: Flat-nose pliers. Specifications

GOST 7283-93: Round nose pliers. Specifications

GOST 7934.5-74: Watch oils and greases. Method for the determination of corrosion activity

GOST 8.393-2010: State system for ensuring the uniformity of measurements. Optical Quadrants. Verification procedure

GOST 809-2014: Track wood screws. General technical specifications

GOST 809-71: Track wood screws. Specifications

GOST 8781-71: Low-temperature clock oils. Specifications

GOST 8921-69: Swing handle nuts. Design

GOST 9031-75: Reference hardness standards

GOST 9186-76: Cardboard for footwear and details made of the same. Rules of acceptance and test methods

GOST 9389-75: Carbon steel spring wire

GOST 9509-74: Scales and dosimeters. Knife-edges and bearings of steel. General requirements

GOST 9533-81: Trowels, tuck pointing tools. Specifications

GOST 9900-2013: Glass and glass products. Methods for determination of mechanical properties. Determination of elasticity modulus at cross static bending

GOST R 50.05.06-2018: Conformity assessment system for the use of nuclear energy. Conformity assessment in the form of examination. Unified procedures. Magnetic particles examination

GOST R 50982-2003: Fire equipment. Specialized fire department tools. General technical requirements. Test methods

GOST R 50982-2009: Fire equipment. Specialized fires department tools. General technical requirements. Test methods

GOST R 50982-2019: Fire fighting equipment. Tool for special work in fires. General technical requirements. Test methods

GOST R 51016-97: Sets of carbon steel and aluminium alloys. General specifications

GOST R 52787-2007: Hinge and pliers tools. Technical requirements

GOST R 53843-2010: Engines of vehicles. Piston rings. Technical requirements and test methods

GOST R 53935-2010: Screwdrivers for fitting and assembling for recessed screws and wood screws. General technical requirements, methods of control and tests

GOST R 55509-2013: Pipeline valves. Metals used in pipeline valves production. Basic requirements for choice of materials

GOST R 56512-2015: Non-destructive testing. Method of magnetic particle testing. Standard technological processes

GOST R 57180-2016: Welding joints. Methods for determination of mechanical properties, macrostructure and microstructure

GOST R 57968-2017: Polymer composites. Test method of samples for shearing

GOST R 58515-2019: Trowel, shovels and cuts. Technical conditions

GOST R 58518-2019: Steel construction hammers. Technical conditions

MI 1782-87: GSI. Calibration procedure

MI 1799-87: Guidelines. Squares testing 90 degrees. Control method

MI 1812-87: Gages threaded tapered. Methods of control

MI 1988-89: Guidelines. State system for ensuring uniformity of measurements. Zubomer. Model 23900. Method of verification

MI 2077-90: Micrometers with inserts

OST 108.004.109-80: Welded joint seams of CHP plant power equipment. Magnetic-particle control method.

OST 3-98-80: Constructional and spring refining steel. Technical requirements.

RD 26.260.15-2001: The leading document. Positive material identification of the main and welding materials and finished goods.

RD 50-460-84: Guidelines. Ensuring the durability of products. Method for experimental evaluation of plasticity of the surface layers of machine parts

RDMU 80-76: Guidelines for designing sheet metal stamping for separation operations

RDMU 95-77: Guidelines for the design of tooling for stamping parts from sheet materials elastic medium

RST RSFSR 605-89: Folding knives. General technical conditions

RST RSFSR 655-81: Ice screws fishing. General technical conditions

ST TsKBA 008-2014: Pipe fittings. Calculation and evaluation of reliability and safety at the design stage

ST TsKBA 030-2006: Pipe fittings. Springs helical cylindrical. General technical conditions

STB 813-93: Scissors. General specifications

Customers Who Viewed This Item Also Viewed:

Man-machine system. Operator's arm-chair. General ergonomic requirements
Language: English
Price: $73.00
Traction railway stock wheelsets of 1520 mm gauge railways. General specifications
Language: English
Price: $137.00
Safety of machinery. Guards. General requirements for the design and construction of fixed and movable guards
Language: English
Price: $332.00
Safety of machinery. Interlocking devices associated with guards. Principles for design and selection
Language: English
Price: $436.00
Seismic building design code
Language: English
Price: $594.00
Conformity assessment. The procedure for conducting inspection control in certification procedures
Language: English
Price: $491.82

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!