GOST R 50759-95
ГОСТ Р 50759-95
|
|
Gas analyses for control of industrial and transport emissions. General specifications
Анализаторы газов для контроля промышленных и транспортных выбросов. Общие технические условия
Status: Effective - Introduced for the first time. IUS 6-1995
This standard applies to gas analyzers designed to measure the content of pollutants in industrial and vehicle emissions. Measurements in order to protect the environment are carried out: - with periodic and continuous monitoring of industrial emissions directly from their sources; - when monitoring samples of gas emissions delivered to analytical laboratories; - with periodic inspection of vehicles. This standard can be used for certification.
Настоящий стандарт распространяется на анализаторы газов, предназначенные для измерений содержания загрязняющих веществ в промышленных и транспортных выбросах. Измерения в целях охраны окружающей среды проводят: - при периодическом и непрерывном контроле промышленных выбросов непосредственно у их источников; - при контроле проб газовых выбросов, доставляемых в аналитические лаборатории; - при периодическом контроле транспортных средств. Настоящий стандарт может быть использован для сертификации
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstandart of Russia,
3/30/1995
SKU: RUSS65085
The Product is Contained in the Following Classifiers:
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
3 Activities of testing laboratories »
3.2 Technical equipment of testing laboratories »
3.2.2 Measuring instruments and test equipment »
3.2.2.7 Instruments for determining composition, state and properties of substances »
ISO classifier »
71 CHEMICAL INDUSTRY »
71.040 Analytical Chemistry »
71.040.40 Chemical analysis »
National standards »
71 CHEMICAL INDUSTRY »
71.040 Analytical Chemistry »
71.040.40 Chemical analysis »
National Standards for KGS (State Standards Classification) »
Latest edition »
P Measuring devices. Automation and computing facilities »
P6 Instruments for determining composition, state and properties of substances »
P63 Instruments for determining composition and properties of gaseous media and liquids »
National Standards for OKSTU »
GENERAL PURPOSE INSTRUMENTS AND AUTOMATION »
Devices for determining the composition and properties of gases, liquids, solids and bulk substances »
The Document References:
3086-84: Maximum permissible concentrations (MPC) of pollutants in the atmospheric air of populated areas (as amended)
GOST 12.2.007.0-75: Occupation safety standards system Electrical equipment. General safety requirements
GOST 12997-84: SSI Products. General specifications
GOST 13033-84: Gsp. Electrical analog equipment and means for automation
GOST 13053-76: Ssi pneumatic instruments and devices
GOST 13093-81: Gas analyzers. Dimensions for threaded joints and hose couplings
GOST 14192-77: Marking of cargoes
GOST 14254-80: Electrotechnical articles. Enclosures. Degrees of protections. Designations. Test methods
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 17.2.4.02-81: Nature protection. Atmosphere. General requirements for determination of pollutants
GOST 2.601-68: Unified system for design documentation. Exploitative documents
GOST 20.39.108-85: General requirements complex system. Human factors, inhabitancy and technical aesthetics requirements. Nomenclature and order of choice
GOST 22315-77: Aggregate means of information-measuring systems. General principles
GOST 22316-77: Aggregate means of information-measuring systems. Complex of normalized characteristics general requirements
GOST 22782.0-81: Explosion-proof electrical equipment
GOST 22782.3-77: Explosion-proof electrical equipment with special means
GOST 22782.4-78: Explosion-proof electrical apparatus. Pressurized enclosure. Technical requirements and methods of testing
GOST 22782.5-78: Explosion proof electrical apparatus with the type of protection «intrinsically-safe electrical circuit». Technical requirements and test methods
GOST 22782.6-81: Explosion proof electrical apparatus. Flameproof enclosure. Technical requirements and Test methods.
GOST 22782.7-81: Explosion-proof electric equipment with "e" type protection
GOST 23170-78: Packing for products of engineering industry. General requirements.
GOST 24054-80: Engineering and instrument production items. Leak detection methods. General requirements
GOST 25164-82: Connections of SSI instruments and devices with external hydraulic and gas lines. Types, basic parameters and dimensions. Technical requirements
GOST 25165-82: Connections of SSI instruments and devices with external pneumatic lines. Types, basic parameters and dimensions. Technical requirements
GOST 26.010-80: Unified system of standards for instrument-making. Measuring and automation devices. Input and output frequency electric continuous signals
GOST 26.011-80: Measuring and automation devices. Input and output current and voltage continuous signals
GOST 26.013-81: Measurement and automation means. Input and output electrical signals with discrete change of parameters
GOST 26.014-81: Measurement and automation means. Input and output electric coding signals
GOST 26.015-81: Measuring and automation devices. Pneumatic input and output signals
GOST 26828-86: Instrumentation and machine building products. Marking
GOST 27883-88: Industrial process measurement and control equipment. Reliability. General requirements and test methods
GOST 5365-83: Electrical measuring instruments. Dials and scales. General technical requirements
GOST 8.009-84: State system for ensuring the uniformity of measurements. Standardized metrological characteristics of measuring instruments
GOST 8.315-91: State system for ensuring the uniformity of measuring. Reference materials. Basic principles, ways of development, certification, approval, registration and use
GOST 8.395-80: Standard measurement conditions for calibration
GOST 8.508-84: State system for ensuring the uniformity of measurements. Metrological characteristics of measurements means and precision characteristics of automation means. General methods of estimate and control
GOST R 50460-92: Mark of conformity for obligatory certification form, dimensions dnd technical requirements
PR 50.2.009-94: The testing and approval procedure for the measurement instrumentation
The Document is Referenced By:
GOST 32210-2013: Emission of the exhaust gas pollutants by the main-line and shunting of the special-purpose railway rolling stock. Norms and determination methods
GOST 33754-2016: Emissions of harmful substances and smoke of exhaust gases of autonomous traction and motor rolling stock. Norms and determination methods
GOST R 113.06.01-2023: Best available technologies. Automated emission control systems in the production of cement. General requirements for the organization of automatic control and the selection of measuring sections and measurement locations
GOST R 50953-2008: Emission of the exhaust gas pollutants by the main-line and shunting diesel locomotives. Norms and determination methods
GOST R 50953-96: Emission of the exhaust gas pollutants by the main line and shunting diesel locomotives. Norms and determination methods
GOST R 54129-2010: Emission of the exhaust gas pollutants by the main-line and shunting for the special-purpose rolling stock. Norms and determination methods
MI 2501-98: Recommendation. State system for ensuring uniformity of measurements. Analyzers MSI 150 Compact. Method of verification
MI 3442-14: State system for ensuring uniformity of measurements. The amount of oil produced in the Ostroluk field and the Ternovsky field of the West Lebedevsky license area of OAO NK Saratovneftegeofizika
PR 50.1.074-2004: Preparation of draft national standards of the Russian Federation and draft amendments thereto for approval, registration and publication. Amendment of standards and preparation of documents for their abolition
RD 153-34.1-27.301-2001: Test methods for ash collecting plants of thermal power plants and boilers
TSN 13-311-01: Inspection and assessment of the technical condition of buildings and structures
|
Customers Who Viewed This Item Also Viewed:
 |
Jet fuels
Language: English |
System for ensuring the reliability and safety of construction sites. Loads and impacts. design standards
Language: English |
Chill moulds. Ventilation channels. Dimensions
Language: English |
Laminated glued wood. Methods for determination of ultimate and modulus of elasticity in static bending
Language: English |
Microbiology of food and animal feeding stuffs. Methods for detection and enumeration of sulphite-reducing bacteria growing under anaerobic conditions
Language: English |
Rails of types P38 and P42. Technical conditions
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
