GOST 13913-78

ГОСТ 13913-78

Laminated wood plastics. Specifications

Пластики древесные слоистые (ДСП). Технические условия

Status: Effective - Supersedes. The limitation of the effectiveness period has been lifted: Protocol No. 4-93 of the IGU dated 10.21.93 (IUS 4-1994)

The standard applies to wood laminates (DSP) made from sheets of peeled birch veneer glued together with synthetic resole resins.

Стандарт распространяется на древесные слоистые пластики (ДСП), изготовленные из листов березового лущеного шпона, склеенных синтетическими смолами резольного типа.

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 20

Approved: Gosstandart of the USSR, 12/5/1978

SKU: RUSS65260

Price: $244.44




The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 79 Wood processing technology »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.6 Testing and control of wood products » 4.6.2 Products of wood, cork, straw and wickerwork »

ISO classifier » 79 WOOD PROCESSING TECHNOLOGY » 79.060 Wood boards » 79.060.10 Plywood »

National standards » 79 WOOD PROCESSING TECHNOLOGY » 79.060 Wood boards » 79.060.10 Plywood »

National Standards for KGS (State Standards Classification) » Latest edition » To Timber. Wood products. Cellulose. Paper, cardboard » K2 Lumber and wood products » K24 Plywood and plywood products »


As a Replacement Of:

GOST 13913-68: Wood layered plastics

The Document References:

GOST 11358-89: Dial-type thickness gauges and dial-type wall thickness gauges graduated in 0,01 and 0,1 mm. Specifications

GOST 14192-77: Marking of cargoes

GOST 15812-87: Laminated wood. Terms and definitions

GOST 2140-81: Visible defects, of wood. Classification, terms and definitions, methods of measurement

GOST 3749-77: Checking 90° squares. Specifications

GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications

GOST 577-68: Clock-type dial indicators graduated in unit divisions of 0,01 mm. Specifications

GOST 6433.2-71: Solid electrical insulating materials. Methods for evaluation of electrical resistance at d. c. voltages

GOST 6433.3-71: Solid electrical insulating materials. Methods for evaluation of electrical strength at a. c. voltage at power (50 Hz) frequency and d. c. voltage

GOST 6433.4-71: Solid electrical insulating materials. Methods for evaluation of dielectric power factor and permittivity at power (50 Hz) frequency

GOST 7502-89: Measuring metal tapes. Specifications

GOST 7502-98: Measuring metal tapes. Specifications

GOST 901-78: Bakelite lacquers. Specifications

GOST 9620-94: Laminated glued wood. Sampling and general requirements in testing

GOST 9621-72: Laminated glued wood. Methods for determination of physical properties

GOST 9622-87: Laminated glued wood. Methods for determination of ultimate strength and modulus of elasticity in tension

GOST 9623-87: Laminated glued wood. Method for determination of ultimate strength and modulus of elasticity in compression

GOST 9624-93: Laminated glued wood method for determination of shear strength

GOST 9625-87: Laminated glued wood. Method for determination of strength and elasticity module in static bending

GOST 9626-90: Laminated glued wood. Method for determination of impact viscosity in bending

GOST 9627.1-75: Glued plywood. Method for determination of hardness

GOST 9627.2-75: Glued plywood. Method for determination of heat resistance

GOST 9627.3-75: Glued plywood. Method for determination of oil resistances

GOST 99-89: Cut veneer. Specifications

GOST 99-96: Rotary cut veneer

The Document is Referenced By:

GOST 13354-91: Gated wooden patterns. Specifications

GOST 23476-79: Tramway and trolleybus overhead trolley wire supporting devices. General specifications

GOST 3191-82: Railway cars of 1520 mm track gauge. Parts of wood and wooden materials. General specifications

GOST 3191-93: Railway cars of 1520 mm track gauge. Parts of wood and wooden materials. General specifications

GOST R 56710-2015: Connections on the pasted cores for wooden structures. Specifications

OST 34-13-878-86: Laminated wood plastics. Technical conditions (restriction GOST 13913-76)

SNiP II-25-80: Wood constructions

SP 299.1325800.2017: Ventilation systems of highway tunnels. Design rules

SP 64.13330.2011: Wooden structures.

VSN 36-95: Guidelines for Mechanized Methods for Interior Finishing. Wall Finishing

Customers Who Viewed This Item Also Viewed:

Electromagnetic compatibility of technical equipment. Immunity of equipment for general lighting purposes to electromagnetic disturbance. Requirements and test methods
Language: English
Price: $218.25
Еlectromagnetic compatibility of technical equipment. Harmonic current emissions (equipment input current <= 16 A per phase). Limits and test methods
Language: English
Price: $410.31
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
Language: English
Price: $714.89
Pipeline valves. General safety requirements
Language: English
Price: $213.84
Еlectromagnetic compatibility of technical equipment. Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems. Equipment with rated current <= 16 A and not subject to conditional connection. Limits and test methods
Language: English
Price: $359.87
Obosnovanie bezopasnosti oborudovaniya. Rekomendatsii po podgotovke
Language: English
Price: $67.32
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $108.90
Conformity assessment system for the use of nuclear energy. Personnel in the non-destructive and destructive testing of metal. Requirements and qualification procedure Дата введения в действие 15.03.2018
Language: English
Price: $207.90
State system for ensuring the uniformity of measurements. Verification of testing equipment. General principles
Language: English
Price: $121.77
Unified system of corrosion and ageing protection. Paint coatings. Groups of operation conditions
Language: English
Price: $158.40
Atom stations. Equipment, instruments, means of monitoring and control systems. General technical requirements
Language: English
Price: $1,146.54
System of design documents for construction. Basic requirements for design and working documentation
Language: English
Price: $867.18
Reinforcing rolled products for reinforced concrete constructions. Specifications
Language: English
Price: $298.98
Passenger cars on locomotive traction. Requirements for structural strength and dynamic qualities
Language: English
Price: $595.58
Non-destructive Testing. Welded Joints. Ultrasonic Methods
Language: English
Price: $140.58
Flanges for valves, fittings and pipelines for pressure to PN 250. Design, dimensions and general technical requirements
Language: English
Price: $293.04
Stainless steels and corrosion resisting, heat-resisting and creep resisting alloys. Grades
Language: English
Price: $212.85
Pipeline valves. Leakage rates of valves
Language: English
Price: $173.25
Compilation and execution of safety data sheet of chemical products
Language: English
Price: $175.23
Supports for Cylindrical and Conical Upright Apparatus. Types and Basic Parameters
Language: English
Price: $573.20

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!