GOST 15152-69
ГОСТ 15152-69
|
|
Unified system of corrosion and ageing protection. Industrial rubber products for tropics. General requirements
Единая система защиты от коррозии и старения. Изделия резиновые технические для районов с тропическим климатом. Общие требования
Status: Effective - Introduced for the first time. The limitation of effectiveness has been lifted: Protocol No. 2-92 of the IGU dated 05.10.92 (IUS 2-1993)
The standard applies to rubber technical products supplied to areas with a tropical climate in accordance with GOST 15151 and intended for the assembly of machines, devices and other technical products or for direct delivery, as well as rubber compounds used for the manufacture of these products.
Стандарт распространяется на резиновые технические изделия, поставляемые в районы с тропическим климатом в соответствии с ГОСТ 15151 и предназначенные для комплектации машин, приборов и других технических изделий или для непосредственной поставки, атакже на рези��овые смеси, применяемые для изготовления указанных изделий.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstandart of the USSR,
12/29/1969
SKU: RUSS65265
The Product is Contained in the Following Classifiers:
Standards for pipe fittings (TPA) »
10. Production »
10.7 Coatings »
Standards for pipe fittings (TPA) »
9. Materials for piping valves (TPA) »
9.3 Rubber »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
2 Tests for external factors »
2.2 Testing of manufacturing products »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.10 Testing and monitoring products of rubber and plastics industry »
4.10.1 Rubber products »
ISO classifier »
19 TESTS »
19.040 Climatic tests »
National standards »
19 TESTS »
19.040 Climatic tests »
ISO classifier »
83 RUBBER, RUBBER-TECHNICAL, ASBESTOTECHNICAL AND PLASTIC INDUSTRY »
83.140 Rubber and plastic products »
National standards »
83 RUBBER, RUBBER-TECHNICAL, ASBESTOTECHNICAL AND PLASTIC INDUSTRY »
83.140 Rubber and plastic products »
ISO classifier »
83 RUBBER, RUBBER-TECHNICAL, ASBESTOTECHNICAL AND PLASTIC INDUSTRY »
83.140 Rubber and plastic products »
83.140.01 Rubber and plastic products in general »
National standards »
83 RUBBER, RUBBER-TECHNICAL, ASBESTOTECHNICAL AND PLASTIC INDUSTRY »
83.140 Rubber and plastic products »
83.140.01 Rubber and plastic products in general »
National Standards for KGS (State Standards Classification) »
Latest edition »
L Chemical products and rubber-asbestos products »
L6 Rubber and asbestos products »
L63 Rubber technical products »
National Standards for KGS (State Standards Classification) »
Latest edition »
T General technical and organizational and methodological standards »
T9 Unified system of protection against corrosion and aging of materials and products »
T97 Means and methods of protection against biological factors »
National Standards for OKSTU »
SYSTEMS OF GENERAL TECHNICAL AND ORGANIZATIONAL-METHODOLOGICAL STANDARDS »
Unified system of protection against corrosion and aging of materials and products (ESZKS) »
National Standards for OKSTU »
RUBBER AND ASBESTOS PRODUCTS »
Shaped rubber products »
The Document References:
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 15151-69: Machines, instuments and other industrial products for tropics. General specifications.
GOST 15160-69: Technical cotton fabrics and products tropics. Specifications
GOST 20-85: Rubber-fabric conveyor belts
GOST 9.026-74: Unified system of corrosion and ageing protection. Vulcanized rubber. Method of accelerated determination to ozone and thermolightozone resistance
GOST 9.048-89: Unified system of corrosion and ageing protection. Technical items. Methods of laboratory tests for mould resistance
GOST 9.049-91: Unified system of corrosion and ageing protection. Polymer materials and their components. Methods of laboratory tests for mould resistance
GOST 9.057-75: Unified system of corrosion and ageing protection. Polymeric materials, wood, fabrics, paper, cardboard. Method of laboratory testing for the stability in regards to the deterioration by rodents
GOST 9.058-75: Unified system of corrosion and ageing protection. Polymeric materials, wood, fabrics, paper, cardboard. Resistance test methods to damage by termites
The Document is Referenced By:
GOST 10286-75: Drive belts, wedge-shaped and pulleys for agricultural machinery
GOST 10362-2017: Pressure rubber hoses with thread reinforcement without end fittings. Technical conditions
GOST 10362-76: Pressure hoses of vulcanized rubber with thread reinforcement and without end fitting. Specifications
GOST 10512-78: Magnetic and electromagnetic separators. Specification
GOST 10512-93: Magnetic and electromagnetic separators
GOST 11004-84: Principal ventilation mine blowers
GOST 11101-93: Air foam hoses. Specifications.
GOST 11679.1-2018: Rubber-metal instrument shock-absorbers. Specifications
GOST 11679.1-76: Rubber-metal shock-absorbers for instruments. Specifications
GOST 12.4.166-85: Helmet face piece for commercial gas masks
GOST 1284.2-89: Driving v-belts of standard cross-sections driving v-belts of standard cross-sections
GOST 12855-77: Rubber sheet for transformers. Specifications
GOST 1335-84: Rubber brake hoses with thread reinforcement for railroad and subway transport without couplings
GOST 13385-78: Dielectric polymeric footwear for special purpose. Specifications
GOST 14084-76: Elastic clutches with sprocket wheel. Design. Basic parameters and dimensions
GOST 14279-79: Sleeved water collecting. Technical conditions
GOST 14896-84: Rubber u-packing seals for hydraulic devices
GOST 15151-69: Machines, instuments and other industrial products for tropics. General specifications.
GOST 15850-84: Mine parachutes for cages
GOST 15851-84: Suspension devices for mine cages
GOST 16162-85: Standard reducers. General specifications
GOST 17053.1-80: Ship shock absorbers AKCC-M. Specifications
GOST 17133-83: Rubber sheets for articles, contacting with food stuff. Specifications
GOST 18698-79: Rubber delivery hoses with textile framework
GOST 18829-2017: Rubber o-ring seals for hydraulic and pneumatic equipment. Specifications
GOST 18829-73: Rubber o-ring seals for hydraulic and pneumatic equipment. Specifications
GOST 19324-80: Rubber protective caps. Specifications
GOST 20062-96: Tractor seat
GOST 20-2018: Rubber-fabric conveyer belts. Specifications
GOST 20-85: Rubber-fabric conveyor belts
GOST 21218-75: Rubber spheres dividing for pipelines. Specifications
GOST 21424-75: Pin flexible couplings. Main data. Overall and coupling. Dimensions
GOST 21424-93: Flexible couplings with rubber-bushed studs. Parameters and dimensions
GOST 22704-77: Rubber-fabric chevron seals for hydraulic units. Specifications
GOST 23052-78: Telephone cable boxes. Specification
GOST 23200-78: Pleasure row boats and motor boats. General requirements when delivering for export
GOST 235-78: Rubber tubes for bicycle pumps. Specifications
GOST 24848.1-81: Variator V-belts for industrial equipment. Basic sizes and methods of control
GOST 24848.2-81: Variable-speed drive v-belts for industrial equipment
GOST 25021-93: Disk flexible couplings. Parameters and dimensions
GOST 25452-2017: High-pressure rubber hoses with metal windings without end fittings. Technical conditions
GOST 25452-90: Unarmored high-pressure rubber hoses with metal winding
GOST 25640-83: Foam rubber products for industrial, agricultural and transport mechanical engineering specifications
GOST 26379-84: Wide V-belts for variable-speed drives of agricultural machines. Specifications
GOST 26546-85: Chain variators. General specifications
GOST 26582-85: Food (manufacturing) industry machines and equipment
GOST 26957-86: Variator with wide angle belt pulleys. General specifications
GOST 26957-97: Variators with wide-angle belt pulleys. General specifications
GOST 2748-77: Hard rubber plates, rods and tubes for electrotechnical purposes. Specifications
GOST 27962-88: Industrial equipment
GOST 31562-2012: Рneumatic rock drills. General technical requirements
GOST 31563-2012: Pneumatic hammer drills. Technical requirements and testing methods
GOST 31564-2012: Pneumatic stopper drills. General technical requirements
GOST 31592-2012: Machine reducers. General specifications
GOST 32586-2013: Vibroinsulators rubber and rubber-reinforced for automotive technic. Specifications
GOST 34595-2019: Mining engineering. Pneumatic impulse cartridges. General technical requirements. Test methods
GOST 4671-76: Rubber and rubberized metal components for the bottom hole hydraulic engine bearings. Specifications
GOST 4997-75: Dielectric rubber carpets. Specifications
GOST 5006-83: Toothed clutches. Specifications
GOST 5398-76: Textile reinforced pressure-suction rubber hoses without fittings. Specifications
GOST 5496-78: Rubber technical tubes. Specifications
GOST 5813-2015: Fan v-belts and pulleys for engines of cars, tractors and combines. Requirements and test methods
GOST 5813-93: Fan v-belts and pulleys for engines of cars, tractors and combines
GOST 5883-89: Solid rubber tires
GOST 6051-76: Hollow rubberfabric gaskets. Specifications
GOST 6286-2017: High pressure rubber hoses with metal braids without end fittings. Technical conditions
GOST 6286-73: High-pressure rubber hoses with metal braids without fittings
GOST 6467-79: Vulcanized rubber cords of round and square cross-sections. Specifications
GOST 6625-85: Mine local ventilating fans
GOST 6678-72: Rubber sealing cups for pneumatic apparatus. Specifications
GOST 6980-76: Accumulator ebonite monoblocks for autocars, autobuses and tractors. Specifications
GOST 7075-80: Manual Traveling Underrunning Cranes Specifications
GOST 7183-93: Foam mixers. Specifications.
GOST 7199-77: Rubber-metallic ship bearings. Specifications
GOST 7338-90: Rubber and rubber-fabric sheets. Specifications
GOST 7498-93: Hydro elevators for firefighting. Specifications.
GOST 7890-84: Travelling single-girder suspended cranes. Specifications
GOST 8037-93: Hose branches. Specifications.
GOST 9029-72: Fire turntable combined monitor
GOST 9298-77: Accumulator ebonite monoblocks for aviation. Specifications
GOST 9356-75: Rubber hoses for gas welding and metal cutting. Specifications
GOST 9923-80: Manual fire barrel. Specifications
GOST R 50398-92: Fire hydraulic elevator. Specifications
GOST R 50399-92: Air-foam nozzles. Specifications
GOST R 50400-92: Hose branching. Specifications
GOST R 50401-92: Suction gauzes. Specifications
GOST R 50408-92: Foam mixers. Specifications
GOST R 50891-96: Machine reducers. General specifications
GOST R 50895-96: Toothed clutches. Specifications
GOST R 51246-99: Pneumatic hammer drills. Technical requirements and testing methods
GOST R 52442-2005: Pneumatic stopper drills. General technical requirements
GOST R 52443-2005: Pneumatic rock drills. General technical requirements
GOST R 53820-2010: Motor vehicles. Details of sealing and protective. Technical requirements and test methods
GOST R 53821-2010: Vehicles. Diaphragms and plate membranes. Technical requirements and test methods
GOST R 58088-2018: Mining equipment. Mine parachutes for cages. Specifications
GOST R 58089-2018: Mining equipment. Suspension gears for mine cages. General specifications
OST 16-0.539.009-75: Equipment for arc welding. Guiding wheels. Technical requirements
RD 24.023.52-90: Products of chemical engineering. Gumming. Typical technological process.
RD 34.03.603: Requirements of Use and Testing of Protection Means Used in Electrical Installations and Technical Requirements on Them
RD 34.35.618: Explosionproof Indicating Electrical Contact Pressure Gauges Type VE-16rb. Guide to Overhaul
RD 50-541-85: Guidelines for the implementation of the standards of the Unified System for the Protection of Products and Materials Against Corrosion, Aging and Biodeterioration (ESHSC) in industries
SO 153-34.03.603-2003: Guidelines for Use and Testing of Protective Means Used in Electrical Installations
TU 24.09.683-88: Cabin crane unified KKU
TU 26-01-957-85: Gummed capacitive devices
TU 38 0051166-98: Rubber compounds for the rubber products of aircraft
TU 38 105823-78: Rubber parts for cars GAZ and KAMAZ and rubber used for their manufacture
TU 38-105116-81: Rubber plate for sealing gaskets of vacuum systems
TU 38-105867-90: Technical porous plate with two films
|
Customers Who Viewed This Item Also Viewed:
 |
Jet fuels
Language: English |
System for ensuring the reliability and safety of construction sites. Loads and impacts. design standards
Language: English |
Chill moulds. Ventilation channels. Dimensions
Language: English |
Laminated glued wood. Methods for determination of ultimate and modulus of elasticity in static bending
Language: English |
Microbiology of food and animal feeding stuffs. Methods for detection and enumeration of sulphite-reducing bacteria growing under anaerobic conditions
Language: English |
Rails of types P38 and P42. Technical conditions
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.