GOST 30459-2008
ГОСТ 30459-2008
|
|
Admixtures for concretes and mortars. Determination and estimate of the efficiency
Добавки для бетонов и строительных растворов. Определение и оценка эффективности
Status: Effective - Supersedes. IUS 9-2010
This standard applies to inorganic and organic substances of natural and artificial origin, used as modifiers of the properties of concrete and mortar mixes, concrete and mortar, made on binders based on portland cement clinker. This standard establishes the requirements for test methods for additives that should be considered when assessing their effectiveness in mixtures, concrete and mortars in accordance with the performance criteria according to GOST 24211
Настоящий стандарт распространяется на неорганические и органические вещества естественного и искусственного происхождения, применяемые в качестве модификаторов свойств бетонных и растворных смесей, бетонов и строительных растворов, изготавливаемых на вяжущих на основе портландцементного клинкера. Настоящий стандарт устанавливает требования к методам испытаний добавок, которые следует учитывать при оценке их эффективности действия в смесях, бетонах и растворах в соответствии с критериями эффективности по ГОСТ 24211
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
4/29/2010
SKU: RUSS65357
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
6. Regulatory documents for building materials and products »
k.62 Concretes and mortars »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.1 Testing and control of products of mining and non-metallic industry »
4.1.2 Non-metallic minerals, materials and products »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.100 Building Materials »
91.100.30 Concrete and concrete products »
National standards »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.100 Building Materials »
91.100.30 Concrete and concrete products »
National Standards for KGS (State Standards Classification) »
Latest edition »
Zh Construction and building materials »
Zh1 Construction materials »
Zh19 Test methods. Packaging. Marking »
National Standards for OKSTU »
REINFORCED CONCRETE STRUCTURES AND PARTS (INCLUDING REINFORCED CONCRETE CONCRETE PRODUCTS) »
Concrete and mortars »
As a Replacement Of:
GOST 30459-2003: Additives for concretes and mortars. Methods of determining the efficiency
The Document References:
GOST 1.0-92: State System for Standardization of Russian Federation. Basic principles
GOST 10060.0-95: Methods for the determination of frost-resistance. General requirements
GOST 10060.2-95: Concretes, rapid method for the determination of frost-resistance by repeated alternated freezing and thawing
GOST 10060-2012: Concretes. Methods for the determination of frost-resistance
GOST 10178-85: Portland cement and portland blastfurnace slag cement. Specifications
GOST 10180-90: Concretes. Methods for strength determination using reference specimens
GOST 10181-2000: Concrete Mixtures Test method
GOST 10834-76: Hydrophobizing liquid 136-41. Specifications
GOST 12730.1-78: Concretes. Methods of determination of density
GOST 12730.3-78: Concretes. Method of determination of water absorption
GOST 12730.5-84: Concretes. Methods for determination of water tightness
GOST 12852.0-77: Cellular concrete. General requirements to test
GOST 23732-79: Water for concretes and mortars. Specifications
GOST 23789-2018: Gypsum binders. Test methods
GOST 23789-79: Gypsum binders. Test methods
GOST 24211-2008: Admixtures for concretes and mortars. General specifications
GOST 25485-89: Cellular concretes. Specifications
GOST 25820-2000: Lightweight aggregates concretes. Specifications
GOST 26633-91: Heavy-weight and sand concretes. Specifications
GOST 27006-86: Concretes. Rules for mix proportioning
GOST 27677-88: Corrosion protection in construction. Concretes. General requirements for testing
GOST 28013-89: Mortars. General specifications
GOST 28013-98: Mortars. General specifications
GOST 30459-2003: Additives for concretes and mortars. Methods of determining the efficiency
GOST 310.4-81: Cements. Methods of tests of bending and compression strengths
GOST 31108-2003: General structural Portland clinker cements. Specifications
GOST 31359-2007: Cellular autoclave curing concretes. Specifications
GOST 31383-2008: Protection against corrosion of concrete and reinforced concrete constructions. Test methods
GOST 32496-2013: Fillers porous for light concrete. Specifications
GOST 5802-86: Mortars. Test methods.
GOST 6732.2-89: Organic dyes, intermediates for dyes, auxiliary compounds for textiles. Sampling methods
GOST 7473-2010: Fresh concrete. Specifications
GOST 7473-94: Ready-mixed concrete. Specifications
GOST 8267-93: Crushed stone and gravel of solid rocks for construction works. Specifications
GOST 8269.0-97: Mauntainous rock road-metal and gravel, industrial waste products for construction works. Methods of physical and mechanical tests
GOST 8736-93: Sand for construction works. Specifications
GOST 9179-77: Lime for building purposes. Specifications
GOST 9757-90: Artificial porous gravel, crushed stone and sand artificially produced expanded/foamed gravel, crushed rock and sand]. Specifications
SNiP 10-01-94: System of normative documents in construction. Basic provisions.
The Document is Referenced By:
GOST 24211-2008: Admixtures for concretes and mortars. General specifications
GOST 25485-2019: Cellular concrete. General specifications
GOST 25820-2014: Lightweight aggregates concretes. Specifications
GOST 26633-2012: Heavy-weight and sand concretes. Specifications
GOST 28013-98: Mortars. General specifications
GOST 28575-2014: Corrosion protection in construction. Structural concrete. Test of vapour permeability of coatings
GOST 31358-2019: Dry building floor mixes. Technical specifications
GOST 32943-2014: Materials and systems for the protection and repair of concrete structures. Requirements to bonded connections of structural strengthening elements
GOST 33083-2014: Dry building plaster cement binder mixes. Specifications
GOST 33762-2016: Products and systems for the protection and repair of concrete structures. Requirements for injection-sealing compounds and seals of cracks, cavities and clefts
GOST 34277-2017: Materials and systems for the protection and repair of concrete structures. Requirements for anchoring compositions and adhesion-strength fastenings of reinforcement elements
GOST 34885-2022: System of dry construction waterproofing mixtures based on cement binder for sealing static joints (cracks) in building structures. Technical conditions
GOST 7473-2010: Fresh concrete. Specifications
GOST R 54358-2011: Dry cement base decorative coats for facade’s thermal insulation composite systems with external mortar’s lays. Specifications
GOST R 54358-2017: Dry cement base decorative coats for faзade’s thermo insulation composite systems with external plaster lays. Specifications
GOST R 54359-2011: Dry cement base adhesives, base coats and patching putties for facade’s thermo insulation composite systems with external mortar’s lays. Specifications
GOST R 54359-2017: Dry cement base decorative coats for faзade’s thermo insulation composite systems with external plaster lays. Specifications
GOST R 54854-2011: Light-weight concretes on phytogenesis organic aggregates. Specifications
GOST R 56178-2014: Modifiers of organic-mineral origin of MB type for concretes, mortars and dry mixes. Specifications
GOST R 56378-2015: Materials and systems for the protection and repair of concrete structures. Requirements for products repair and bond connections for rehabilitation of structures
GOST R 56593-2015: Mineral admixtures for concretes and mortars. Test methods
GOST R 56703-2015: Dry building in-depth waterproofing capillary mixes based on cement binder. Specifications
GOST R 58271-2018: Dry rubbing mixes. Technical conditions
GOST R 58766-2019: Building solutions. General specifications
GOST R 58894-2020: Condensed silica fume for concrete and mortars. Specifications
GOST R 70309-2022: Grouting compositions for the finishing decorative and protective layer of piece materials for facade thermal insulation composite systems with external plaster layers. Technical conditions
ODM 218.3.028-2013: Guidelines for the repair and maintenance of cement concrete pavements of roads
ODM 218.3.070-2016: Guidelines on formulation of self-compacting concrete with prescribed waterproof properties for bored piles
ODM 218.3.077-2016: Guidelines for justifying the parameters of design and technology in the repair of asphalt concrete pavements with layers of cement concrete
RMD 51-25-2018 St. Petersburg: Recommendations for the design, installation and operation of facade systems for new construction, reconstruction and repair of residential and public buildings in St. Petersburg. Part II Recommendations for the operation and repair of facade systems for new construction and reconstruction of residential and public buildings in St. Petersburg
RU 1.2.1.14.001-2012: Guidance for the repair of concrete, reinforced concrete constructions and hydrotechnical constructions of nuclear power plant stations
SP 15.13330.2012: Masonry and reinforced masonry structures
SP 435.1325800.2018: Monolithic concrete and reinforced concrete structures. Rules for the production and acceptance of work
SP 78.13330.2012: Automobile roads
STO 95 12005-2017: Objects of use of atomic energy. Concrete work in the construction of the protective shell of the reactor installation of nuclear power plants. Basic requirements and quality control organization
STO DOKTOR BETON 68686983-002-2011: Dry building mixtures trade mark "ДОКТОР БЕТОН®" for waterproofing and repair concrete construction. Technical specifications and quality characteristics
|
Customers Who Viewed This Item Also Viewed:
 |
Liquids for aircrafts systems. Method for determination thermo oxidizing stability and corrosion activity
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.