GOST 31177-2003

ГОСТ 31177-2003

Safety of machinery. Safety requirements for fluid power systems and their components. Hydraulics

Безопасность оборудования. Требования безопасности к гидравлическим и пневматическим системам и их компонентам. Гидравлика

Status: Effective - Introduced for the first time

The standard applies to hydraulic systems and components in production equipment and establishes safety requirements for their intended use. The standard lists the hazards and factors affecting the safe operation of systems and their components. The standard is intended for use in the design, manufacture and modernization of systems and components.

Стандарт распространяется на гидравлические системы и компоненты в производственном оборудовании и устанавливает требования безопасности при их целевом использовании. В стандарте перечислены опасности и факторы, влияющие на безопасную эксплуатацию систем и их компонентов. Стандарт предназначен для применения при конструировании, изготовлении и модернизации систем и компонентов.

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 19

Approved: Federal Agency for Technical Regulation and Metrology, 12/1/2004

SKU: RUSS65363

Price: $244.44




The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 13 Environmental protection, protection of people from environmental exposure. Security »

Construction (Max) » Standards » Other state standards used in construction » 23 Hydraulic and pneumatic systems and components for general use. »

Evidence base (TR CU, Technical Regulation of the Customs Union) » 010/2011 TR CU. On safety of machinery and equipment » Regulations and standards (to ТР ТС ТС 010/2011) »

Evidence base (TR CU, Technical Regulation of the Customs Union) » 038/2016 TR EAEU. About safety of rides » Regulations and standards (to 038/2016 TR EAEC) »

PromExpert » SECTION III. LABOR PROTECTION AND SAFETY » III Occupational safety requirements for production equipment and processes » 2 Safety requirements for certain types of work » 2.2 Operation of production machines and equipment »

ISO classifier » 13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY » 13.110 Safety of machinery »

National standards » 13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY » 13.110 Safety of machinery »

ISO classifier » 23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS » 23.100 Volumetric hydraulic actuators and pneumatic actuators »

National standards » 23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS » 23.100 Volumetric hydraulic actuators and pneumatic actuators »

ISO classifier » 23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS » 23.100 Volumetric hydraulic actuators and pneumatic actuators » 23.100.01 Volumetric hydraulic actuators and pneumatic actuators in general »

National standards » 23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS » 23.100 Volumetric hydraulic actuators and pneumatic actuators » 23.100.01 Volumetric hydraulic actuators and pneumatic actuators in general »

National Standards for KGS (State Standards Classification) » Latest edition » G Machines, equipment and tools » G0 General rules and regulations for engineering » G07 Safety »


The Document References:

GOST 1.0-92: State System for Standardization of Russian Federation. Basic principles

GOST 1.2-97: Interstate system for standardization. Interstate standards, rules and recommendations on interstate standardization. Procedure for development, taking over application, renovation and cancellation

GOST 12.1.010-76: Explosion safety. General requirements

GOST 12.2.040-79: Positive-displacement hydraulic drives and lubricating systems. General safety requirements for construction

GOST 12.2.086-83: Positive displacement hydraulic drives and lubrication systems

GOST 14254-96: Degrees of protection provided by enclosures (IP Code)

GOST 17752-81: Hydraulic and pneumatic drive. Terms and definitions

GOST 2.782-96: Unified system for design documentation. Graphic designations. Hydraulic and pneumatic machines

GOST 2.784-96: Unified system for design documentation. Graphic designations. Pipeline elements

GOST 7.67-94: System of standards on information librarianship and publishing. Codes of names of countries

GOST R IEC 60204-1-99: Safety of machinery. Electrical equipment of machines. Part 1. General requirements

The Document is Referenced By:

GOST 10000-2017: Tractor-drawn trailers and semi-trailers. General technical requirements

GOST 12.2.019-2005: Occupational safety standards system. Agricultural tractors and self-propelled machines. General safety requirements

GOST 12.2.019-2015: Occupational safety standards system. Tractors and agricultural machinery. General safety requirements

GOST 12.2.121-2013: Occupational safety standards system. Industrial tractors. General safety requirements

GOST 31439-2011: Equipment and components intended for use in potentially explosive atmospheres in underground mines

GOST 31441.5-2011: Non-electrical equipment for potentially explosive atmospheres. Part 5. Protection by constructional safety «c»

GOST 31541-2012: Hammers. Safety requirements

GOST 31542-2012: Automatic and semi-automatic metal forming machines. Safety requirements

GOST 31733-2012: Hydraulic presses. Safety requirements

GOST 33164.3-2014: Mining and tunneling equipment. Timbering, mechanized. Hydraulic control systems. Safety requirements and methods of testing

GOST 33558.1-2015: Hoists, building, for cargo, vertical. General specifications

GOST 33558.2-2015: Hoists, building, for cargo, inclined. General specifications

GOST 33807-2016: Safety of attractions. General requirements

GOST EN 12001-2012: Conveying, spraying and placing machines for concrete and mortar. Safety requirements

GOST EN 1218-1-2013: Safety of woodworking machines. Tenoning machines. Part 1. Single end tenoning machines with sliding table

GOST EN 12415-2006: Safety of metal-working machine tools. Numerically controlled turning machines and turning centres

GOST EN 12417-2006: Safety of metal-working machine tools. Machining centres

GOST EN 12478-2006: Safety of machine tools. Large numerically controlled turning machines and large turning centres

GOST EN 12717-2011: Safety of machine tools. Drilling machines

GOST EN 12840-2011: Safety of machine tools. Manually controlled turning machines with or without automatic control

GOST EN 13021-2012: Winter service machines. Safety requirements

GOST EN 13128-2006: Safety of metal-working machine tools. Milling machines (including boring machines)

GOST EN 13218-2011: Safety of machine-tools. Stationary grinding machines

GOST EN 13898-2011: Safety of machine tools. Sawing machines for metal cold cutting

GOST EN 1760-1-2004: Safety of machinery. Pressure sensitive protective devices. Part 1. General principles for the design and testing of pressure sensitive mats and pressure sensitive floors

GOST EN 474-1-2013: Excavating machines. Safety. Part 1 General requirements

GOST EN 609-1-2012: Agricultural and forestry machinery. Safety of log splitters. Part 1. Wedge splitters

GOST EN 609-2-2012: Agricultural and forestry machinery. Safety of log splitters. Part 2. Screw splitters

GOST ISO 26322-1-2012: Tractors for agricultural and forestry. Safety. Part 1. Standard tractors

GOST R 53010-2008: Hydraulic presses. Safety requirements

GOST R 53130-2008: Safety of attractions. General requirements

GOST R 54406-2011: Ramps installed on vehicles for wheelchair users and for people restricted in their mobility. Safety requirements and testing

GOST R 54431-2011: Metal-working machines. General safety requirements

GOST R 54775-2011: Powered support pumping stations. General technical requirements. Test methods

GOST R 55157-2012: Mining equipment. Hydraulic jacks. General technical requirements and test methods

GOST R 55160-2012: Mining equipment. Mine face conveyers jacks. General technical requirements and test methods

GOST R 55729-2013: Mining equipment. Hydraulic props for roof of supports. General specifications

GOST R 55734-2013: Mining equipment. Quarry spreaders. General technical requirements and test methods

GOST R 55735-2013: Mining equipment. High pressure mine rubber hoses with metallic tapings and metallic braidings with fitting. Safety requirements and test methods

GOST R 58200-2018: Mining equipment. Powered face systems. General safety requirements

GOST R 60.1.2.2-2016: Robots and robotic devices. Safety requirements for industrial robots. Part 2. Robot systems and integration

GOST R EN 12717-2006: Safety of machine tools. Drilling machines

GOST R EN 12750-2012: Safety of woodworking machines. Four sided planning (longitudinal and milling) machines

GOST R EN 12840-2006: Safety of machine-tools. Manually controlled turning machines with or without automatic control

GOST R EN 12957-2007: Safety of metal-working machine tools. Electrodisharge machines

GOST R EN 13218-2006: Safety of machine-tools. Stationary grinding machines

GOST R EN 13463-5-2009: Non-electrical equipment for potentially explosive atmospheres. Part 5. Protection by constructional safety “c”

GOST R EN 13788-2007: Safety of metal-working machine tools. Multi-spindle automatic turning machines

GOST R EN 13898-2009: Machine tools. Safety. Sawing machines for metal cold cutting

GOST R EN 1710-2009: Equipment and components intended for use in potentially explosive atmospheres in underground mines

GOST R EN 1870-1-2011: Safety of woodworking machines. Circular sawing machines. Part 1. Circular multipurpose saw benches (with and without sliding table), circular dimension saw and circular building site saws

GOST R EN 848-1-2011: Safety of woodworking machines. One side milling machines. Part 1. Single spindle milling machines with vertical lower arrangement of spindle

GOST R EN 859-2010: Safety of woodworking machines. Hand fed surface planning machines

GOST R EN 860-2010: Safety of woodworking machines. Outside thickness planning machines

GOST R EN 861-2011: Safety of woodworking machines. Surface planning and thickening machines

GOST R EN 940-2009: Safety of woodworking machines. Combined woodworking machines

GOST R ISO 16156-2008: Machine-tools safety. Jaw chucks

GOST R ISO 23125-2012: Safety of machine tools. Turning machines

GOST R ISO 4254-1-2011: Agricultural machinery. Safety requirements. Part 1. General requirements

STB 1568-2005: Occupational safety standards system. Printing equipment. Safety requirements and test methods

STB EN 12001-2008: Machines for transportation, application and distribution of concrete and mortar mixes. Safety requirements

STB EN 12158-1-2008: Construction site hoists. Part 1. Hoists with accessible platform

STB EN 12158-2-2008: Construction site hoists. Part 2. Inclined hoists with inaccessible forklifts

STB EN 12159-2010: Construction site cargo and passenger hoists with vertical movement of the cab

STB EN 12855-2008: Equipment for foodstuffs processing. Cutters with rotating bowl. Safety and Health Requirements

STB EN 13019-2006: Machines for cleaning of road surfaces. Safety requirements

STB EN 13020-2008: Machinery for arrangement, repair and maintenance of pavements. Safety requirements

STB EN 13021-2006: Machines for winter maintenance of roads. Safety requirements

STB EN 13524-2007: Machines for road maintenance. Safety requirements

STB EN 1501-1-2007: Garbage trucks. General specifications and safety requirements. Part 1. Garbage trucks with back loading

STB EN 1501-2-2008: Garbage trucks. General specifications and safety requirements. Part 2. Garbage trucks with side loading

STB EN 1870-10-2007: Safety of woodworking machines. Radial saw machines. Part 10. Automatic and semiautomatic rising blade machines

STB EN 1870-11-2007: Safety of woodworking machines. Radial saw machines. Part 11. Automatic and semiautomatic horizontal cross-cutting rising blade machines, (radial arm-sawing machines)

STB EN 1870-12-2007: Safety of woodworking machines. Radial saw machines. Part 12. Pendulum cross-cutting rising blade machines

STB EN 1870-15-2007: Safety of woodworking machines. Radial saw machines. Part 15. Multi blade cross-cutting machines with motorized and manual loading and/or unloading

STB EN 1870-2-2006: Safety of woodworking machines. Circular sawing machines. Part 2. Horizontal and vertical machines for slabs cutting

STB EN 1870-7-2006: Safety of woodworking machines. Circular sawing machines. Part 7. Bolter machines with mechanical delivery of motorized table with manual loading and/ or unloading

STB EN 1870-8-2006: Safety of woodworking machines. Circular sawing machines. Part 8. Edging and deal-frame machines with motorized sawing unit and with manual loading and/ or unloading

STB EN 1870-9-2007: Safety of woodworking machines. Circular sawing machines. Part 9. Bilateral mitering machines with mechanical delivery and with manual loading and/ or unloading

GOST 34595-2019: Mining engineering. Pneumatic impulse cartridges. General technical requirements. Test methods

GOST R 58493-2019: Mining equipment. Drilling machines. General technical requirements and test methods

Customers Who Viewed This Item Also Viewed:

Electromagnetic compatibility of technical equipment. Immunity of equipment for general lighting purposes to electromagnetic disturbance. Requirements and test methods
Language: English
Price: $218.25
Еlectromagnetic compatibility of technical equipment. Harmonic current emissions (equipment input current <= 16 A per phase). Limits and test methods
Language: English
Price: $410.31
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
Language: English
Price: $714.89
Obosnovanie bezopasnosti oborudovaniya. Rekomendatsii po podgotovke
Language: English
Price: $67.32
Security of Financial (banking) Operations. Information Protection of Financial Organizations. Basic Set of Organizational and Technical Measures
Language: English
Price: $843.90
Еlectromagnetic compatibility of technical equipment. Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems. Equipment with rated current <= 16 A and not subject to conditional connection. Limits and test methods
Language: English
Price: $359.87
Non-destructive Testing. Welded Joints. Ultrasonic Methods
Language: English
Price: $140.58
Construction in seismic regions of Ukraine
Language: English
Price: $5,909.85
Aviation turbine fuels and kerosine. Determination of smoke point
Language: English
Price: $270.63
Distillate fuels. Determination of free water and particulate contamination by visual inspection method
Language: English
Price: $165.87
Aviation gas turbine fuels. Method for determining thermal oxidative stability
Language: English
Price: $473.36
Hazard classification of chemical products. General requirements
Language: English
Price: $356.40
Warning labeling of chemical products. General requirements
Language: English
Price: $613.80
Safety data sheet for chemical products. General requirements
Language: English
Price: $121.77
Hoisting cranes. Rules and test methods
Language: English
Price: $393.39
Aviation turbine fuels. Determination of lubricity by the ball-on-cylinder lubricity evaluator (BOCLE)
Language: English
Price: $309.43
Aviation turbine fuel. Determination of acidity
Language: English
Price: $218.25
Petroleum products. Determination of color by Saybolt chromometer
Language: English
Price: $218.25
Passenger cars on locomotive traction. Requirements for structural strength and dynamic qualities
Language: English
Price: $595.58
Aviation fuels. Calculating net calorific value
Language: English
Price: $179.45

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!