GOST 32562.1-2013

ГОСТ 32562.1-2013

Coated glass. Classification

Стекло с покрытием. Классификация

Status: Effective - Introduced for the first time. IUS 11-2014

This standard applies to coated glass used for glazing of residential and public buildings that are operated normally. This standard describes the characteristics, properties and classification of coated glass used in construction. Methods and procedures for testing used to assess the resistance of the coating are given in GOST 32562.2, GOST 32562.3. Acceptance rules and production control are given in Appendix ZA GOST 32562.4. This standard does not apply to: glass with glued polymer films, mirrors, enameled glass (steammalit), glass with paint and varnish coating

Настоящий стандарт распространяется на стекло с покрытием, используемое для остекления жилых и общественных зданий, эксплуатируемых в обычном режиме. В настоящем стандарте приводятся характеристики, свойства и классификация стекол с покрытием, используемых в строительстве. Методы и порядок проведения испытаний, используемых для оценки стойкости покрытия, приведены в ГОСТ 32562.2, ГОСТ 32562.3. Правила приемки и производственный контроль приведены в Приложении ZA ГОСТ 32562.4. Настоящий стандарт не распространяется на: стекла с наклеенными полимерными пленками, зеркала, эмалированное стекло (стемалит), стекло с лакокрасочным покрытием

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Federal Agency for Technical Regulation and Metrology, 11/22/2013

SKU: RUSS65385

Price: $319.00




The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 81 Glass and ceramic industry »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.11 Testing and control of glass and ceramic products » 4.11.1 Glass and glass products »

ISO classifier » 01 GENERAL PROVISIONS. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION » 01.040 Dictionaries » 01.040.81 Glass and ceramic industry (Dictionaries) »

National standards » 01 GENERAL PROVISIONS. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION » 01.040 Dictionaries » 01.040.81 Glass and ceramic industry (Dictionaries) »

ISO classifier » 81 GLASS AND CERAMIC INDUSTRY » 81.040 Glass » 81.040.20 Glass for building construction »

National standards » 81 GLASS AND CERAMIC INDUSTRY » 81.040 Glass » 81.040.20 Glass for building construction »

ISO classifier » 81 GLASS AND CERAMIC INDUSTRY » 81.040 Glass » 81.040.30 Glass products »

National standards » 81 GLASS AND CERAMIC INDUSTRY » 81.040 Glass » 81.040.30 Glass products »


The Document References:

GOST 1.0-92: State System for Standardization of Russian Federation. Basic principles

GOST 1.2-2009: Interstate system for standardization. Interstate standards, rules and recommendations on interstate standardization. Rules for development, taking over, application, renovation and cancellation

GOST 111-2001: Flat glass. Specifications

GOST 111-2014: Clear sheet glass. Specifications

GOST 17716-2014: Mirrors. General specifications

GOST 17716-91: Looking-glasses. General specifications

GOST 24866-99: Sealed insulating glass units. Specifications

GOST 30698-2000: Glass tempered for building. Specifications

GOST 30698-2014: Tempered glass. Specifications.

GOST 30826-2001: Laminated glass for building. Specifications

GOST 30826-2014: Glass laminated. Specifications.

GOST 32559-2013: Painted glass. Specifications

GOST 32562.2-2013: Coated glass. Test methods for class A, B, S coatings

GOST 32562.3-2013: Coated glass. Test methods for class C and D coatings

GOST 32562.4-2013: Coatedglass. Acceptance rules

GOST 32563-2013: Adhesive backed polymeric filmed glass. Specifications

GOST 32998.4-2014: Laminated windows. Methods for determining the physical characteristics of the sealing layers

GOST 33087-2014: Heat strengthened glass. Specifications

GOST 33891-2016: Enamelled thermally toughened glass (stemalit). Specifications

GOST 5533-2013: Patterned glass. Specifications

GOST 7481-2013: Armoured glass. Specifications

GOST EN 12898-2014: Glass and glass products. Thermal characteristics determination methods. Determination of the emissivity

GOST EN 14178-1-2016: Alkaline earth silicate glass. Technical requirements

GOST EN 14179-1-2015: Heat soaked thermally toughened glass. Specifications

GOST EN 14321-1-2015: Thermally toughened alkaline earth silicate glass. Technical requirements

GOST EN 15683-1-2017: Thermally toughened channel shaped glass. Technical requirements

GOST EN 1748-1-1-2016: Borosilicate glass. Technical requirements

GOST EN 1748-2-1-2016: Glass ceramics. Technical requirements

GOST EN 410-2014: Glass and glass items. Methods for determining the optical characteristics. Determination of light and solar characteristics

GOST EN 572-7-2017: Channel shaped glass. Technical requirements

GOST EN 673-2016: Glass and glass products. Thermal properties determination methods. Thermal resistance calculation method

GOST EN 674-2016: Glass and glass products. Thermal properties determination methods. Thermal resistance determination by guarded hot plate method

GOST EN 675-2014: Glass and glass items. Methods for determining the thermal characteristics. Determination of resistance to heat transfer by method of measuring the heat flux

GOST R 54161-2010: Mirrors. General specifications

GOST R 54162-2010: Tempered glass. Specifications

GOST R 54164-2010: Glass and glass products. Optical characteristics determination methods. Determination of luminous and solar characteristics

GOST R 54166-2010: Glass and glass products. Thermal properties determination methods. Thermal resistance calculation method

GOST R 54168-2010: Glass and glass products. Thermal properties determination method. Determination of the emissivity

GOST R 54170-2010: Clear flat glass. Specifications

GOST R 54171-2010: Laminated glass. Specifications

GOST R 54173-2010: Sealed insulating glass units. Methods for determining the physical attributes of edge seals

GOST R 54175-2010: Sealed insulating glass units. Specifications

GOST R 54176-2010: Soft coating low emissivity glass. Specification

GOST R 54177-2010: Hart coat low emissivity glass. Specifications

GOST R 54178-2010: Soft coating solar protection or decorative glass. Specifications

GOST R 54179-2010: Hard coating solar protection or decorative glass. Specifications

GOST R 54180-2010: Heat strengthened glass. Specifications

The Document is Referenced By:

GOST 30733-2014: Glass with low emissivity hard coating. Specifications.

GOST 31364-2014: Soft coating low emissivity glass. Specifications

GOST 32562.2-2013: Coated glass. Test methods for class A, B, S coatings

GOST 32562.3-2013: Coated glass. Test methods for class C and D coatings

GOST 32562.4-2013: Coatedglass. Acceptance rules

GOST 33017-2014: Hard coating solar protection or decorative glass. Specifications

GOST 33086-2014: Soft coating solar protection or decorative glass. Specifications

GOST EN 12758-2015: Glass and glass products. Sound insulation values

GOST EN 14179-1-2015: Heat soaked thermally toughened glass. Specifications

GOST EN 14179-2-2015: Heat soaked thermally toughened glass. Evaluation of conformity

GOST EN 14321-1-2015: Thermally toughened alkaline earth silicate glass. Technical requirements

GOST EN 14321-2-2015: Thermally toughened alkaline earth silicate glass. Evaluation of conformity

Customers Who Viewed This Item Also Viewed:

Ball valves and disk gate valves. End-to-end (face-to-face) dimensions
Language: English
Price: $28.00
Safety valves of stream and hot-water boilers. Technical requirements
Language: English
Price: $58.00
Industrial gas burners. General technical requirements
Language: English
Price: $152.00
Petroleum and natural gas industries. Shell-and-tube heat eхchangers. Technical requirements
Language: English
Price: $177.00
Straight and diamond knurl. Form and basic dimensions
Language: English
Price: $76.00
Industrial gas burners. Test methods
Language: English
Price: $204.00
Ball, lifting-plug and cylindrical cocks for nominal pressure at most PN 250. General specifications
Language: English
Price: $142.00
White sugar. Specifications
Language: English
Price: $279.00
Pipeline valves. Methods of control and testing
Language: English
Price: $246.00
Stainless steels and corrosion resisting, heat-resisting and creep resisting alloys. Grades
Language: English
Price: $215.00
Pipeline valves. Leakage rates of valves
Language: English
Price: $175.00
Technical Regulations of the Eurasian Economic Union "On the Safety of Chemical Products"
Language: English
Price: $104.00
Graphite electrodes and nipples. Specifications
Language: English
Price: $279.00
Welded steel pipes for gas and oil pipelines. Technical specifications
Language: English
Price: $90.00

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!