GOST 7338-90

ГОСТ 7338-90

Rubber and rubber-fabric sheets. Specifications

Пластины резиновые и резинотканевые. Технические условия

Status: Effective - Supersedes. The limitation of effectiveness has been lifted: Protocol No. 5-94 of the IGU dated 05.17.94 (IUS 11-12-1994)

The standard applies to vulcanized rubber and rubber-fabric plates intended for the manufacture of rubber products, used to seal fixed joints, prevent friction between metal surfaces, to perceive single shock loads, as well as gaskets, flooring and other

Стандарт распространяется на вулканизированные резиновые и резинотканевые пластины, предназначенные для изготовления резинотехнических изделий, служащих для уплотнения неподвижных соединений, предотвращения трения между металлическими поверхностями, для

Choose Language: 
Format: Electronic (pdf/doc)

Approved: USSR State Committee for Product Quality and Standards Management, 6/13/1990

SKU: RUSS65406

Price: $249.48

English keywords: plastic products; rubber products;


The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 83 Rubber, technical rubber, asbestos and plastic industries »

Evidence base (TR CU, Technical Regulation of the Customs Union) » 019/2011 TR CU. On safety of personal protective equipment » Regulations and standards (to ТР ТС 019/2011) »

Standards for pipe fittings (TPA) » 9. Materials for piping valves (TPA) » 9.3 Rubber »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.10 Testing and monitoring products of rubber and plastics industry » 4.10.1 Rubber products »

ISO classifier » 83 RUBBER, RUBBER-TECHNICAL, ASBESTOTECHNICAL AND PLASTIC INDUSTRY » 83.140 Rubber and plastic products » 83.140.99 Other rubber and plastic products »

National standards » 83 RUBBER, RUBBER-TECHNICAL, ASBESTOTECHNICAL AND PLASTIC INDUSTRY » 83.140 Rubber and plastic products » 83.140.99 Other rubber and plastic products »

National Standards for KGS (State Standards Classification) » Latest edition » L Chemical products and rubber-asbestos products » L6 Rubber and asbestos products » L63 Rubber technical products »

National Standards for OKSTU » RUBBER AND ASBESTOS PRODUCTS » Shaped rubber plates »

National Standards for OKSTU » RUBBER AND ASBESTOS PRODUCTS » Calendered rubber products »

As a Replacement Of:

GOST 7338-77: Rubber and rubber-fabric sheets. Specifications

The Document References:

GOST 10121-76: Selectively purified transformer oil

GOST 10227-86: Jet fuels

GOST 11078-78: Sodium hydrate purified. Specifications

GOST 12433-83: Standard isooctanes. Specifications

GOST 13808-79: Rubber. Method for the determination of low temperature resistance according to elastic rebound after compression

GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence

GOST 15152-69: Unified system of corrosion and ageing protection. Industrial rubber products for tropics. General requirements

GOST 1868-88: Ropes for industrial and household use. Specification

GOST 2.124-85: Sequence of application of purchased products

GOST 20403-75: Rubber. Method for determination hardness in international units (30 to 100 IRHD)

GOST 2084-77: Mobile gasoline Specifications

GOST 2184-77: Sulphuric acid for industrial use. Specifications

GOST 26.008-85: Lettering for inscriptions applied by engraving method. Executive dimensions

GOST 263-75: Rubber. Method for the determination of Shore A hardness

GOST 26663-85: Transport packets. Formation by packaging means. General technical requirements

GOST 269-66: Rubber. General requirements for the physical mechanical tests

GOST 270-75: Rubber. Method of the determination elastic and tensile stress-strain properties

GOST 2789-73: Surface roughness. Parameters and characteristics

GOST 305-82: Diesel fuel. Specifications

GOST 3118-77: Reagents. Hydrochloric acid. Specifications

GOST 4204-77: Reagents. Sulphuric acid. Specifications

GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications

GOST 4328-77: Reagents. Sodium hydroxide. Specifications

GOST 5789-78: Reagents. Toluene. Specifications

GOST 6768-75: Rubber and rubberized fabric. Method for determination of the bond strength at ply separation

GOST 7502-98: Measuring metal tapes. Specifications

GOST 8.051-81: State system for ensuring the uniformity measurements. Permissible errors of measurement of linear dimensions to 500 mm

GOST 8.326-89: State system for ensuring the uniformity of measurements. Metrological certification measuring instruments

GOST 857-95: Industrial synthetic hydrochloric acid

GOST 9.029-74: Unified system of corrosion and ageing protection. Vulcanized rubbers. Method of testing of resistance to ageing under static deformation of compression

GOST 9.030-74: Unified system of corrosion and ageing protection. Vulcanized rubbers. Method of testing resistance to attack by corrosive media in limp state

GOST 9078-84: Flat pallets

GOST 9433-80: Grease ЦИАТИМ-221. Specifications

GOST 9557-87: Flat wooden pallets with dimensions 800ґ1200 mm

GOST 982-80: Transformer oils

The Document is Referenced By:

ATK 26-01-1-89: Pipeline viewing lights. Types and designs

ATK 26-18-14-98: Flanges of vessels and apparatus steel flat welded to a conditional pressure up to Ru 0.1 MPa. Design, dimensions and general technical requirements

Decision 30: On approval of the list of products in respect of which the customs declaration is accompanied by a document about the conformity assessment requirements of the technical regulations of the Customs Union "On safety of agricultural and forestry tractors and trailers to them" (TR TS 031/2012) (as amended on March 21, 2017)

Decision 30: On the list of international and regional (interstate) standards, and in their absence - national (state) standards, resulting in voluntary compliance with the requirements of technical regulations of the Customs Union "On Personal Protective Equipment Safety" (TR CU 019/2011), and the list of international and regional (interstate) standards, and in their absence - national (state) standards, containing rules and methods of research (tests) and measurements, including

GOST 10037-83: Autoclaves for building industry

GOST 10512-93: Magnetic and electromagnetic separators

GOST 1153-2019: Brackets for washbasins and sinks. Technical specifications

GOST 1153-76: Supports for lavatories and sinks. Technical requirements

GOST 11614-94: Semi-automatic flushing valves. Specifications

GOST 11780-74: Moulding rubber combined tamper and rammer. Design

GOST 11783-74: Moulding shoe with rubber tip. Design

GOST 12.2.052-81: Occupational safety standards system. Equipment working with gaseous oxygen. General safety requirements

GOST 12852.5-77: Cellular concrete. Method of steam-permeability coefficient determination

GOST 13455-91: Solid mineral fuel. Methods for the determination of carbon dioxide content of the carbonates

GOST 13781.2-77: Lead joints for 1; 6 and 10 kV power cables. Complete set of details and mounting materials. Specifications

GOST 14624-84: Wood doors for industrial buildings. Types, construction and dimensions

GOST 15062-2017: Seats for unitation. Specifications

GOST 15180-86: Flexible flat gaskets. Main parameters and dimensions

GOST 15963-79: Electrical articles for tropical application. General technical requirements and methods of testing

GOST 15981-70: Apparatus for determining dropping temperature of phenolformaldehyde resins. Specifications

GOST 16519-78: Portable tools. Methods for measurement of parameters of vibration

GOST 16976-71: Coatings of lacquers and paints. Method for determination of chalking degree

GOST 17032-71: Horizontal steel tanks for oil-products. Types and principal dimensions

GOST 17071-91: Fuel oil. Specifications

GOST 18853-73: Swing wooden gates for industrial buildings and structures. Specifications

GOST 19645-74: Moulding mallet with rubber beaters. Design

GOST 19681-2016: Sanitary and technical water fittings. General specifications

GOST 19681-94: Sanitary technical water mixing and distributing accessories. General specifications

GOST 21029-75: Aluminum barrels for chemical products

GOST 2103-89: General purpose mobile belt conveyors

GOST 22390-77: Automobile body-boxes. Fixture parts and circuits for cluster spacing of entrenching tools. Technical requirements

GOST 2263-79: Sodium hydroxide for industrial use. Specifications

GOST 22689.2-89: Polyethylene waste-pipes And related shaped parts. Construction

GOST 23216-78: Electrotechnical products. Storage, transportation, temporary corrosion protection and packing. General requirements and test methods

GOST 23289-2016: Waste water drain sanitary accessories. Specification

GOST 23289-94: Waste water drain sanitary accessories. Specifications

GOST 23410-78: Shield box viewing windows. Types, construction and dimensions

GOST 24698-81: Wooden external doors for dwellings and public buildings. Types, structure and dimensions

GOST 24788-2001: Enameled steel kitchen utensils. General specifications

GOST 24788-2018: Enamelled steel kitchen utensils. General specifications

GOST 24788-81: Enameled steel kitchen utensils.

GOST 25010-81: Howks for plastering. Specifications

GOST 25279-93: Metallic powders. Determination of tap density

GOST 28759.6-90: Gaskets from nonmetallic materials.

GOST 30733-2000: Hard coat low emissivity glass. Specifications

GOST 30765-2001: Metal transport packagings. General specifications

GOST 30808-2002: Spectacles lenses. General specifications

GOST 3124-77: Hose connections for flexible hoses of monitors. Specifications

GOST 31549-2012: Road general-purpose mobile belt conveyors. General specifications

GOST 32565-2013: Safety glass for ground vehicles. General specifications

GOST 32568-2013: Glass units for vehicles grazing. Specifications

GOST 34058-2017: Internal buildings and structures utilities. Mounting and start-up adaptive control of air-conditioning evaporative and condensing units. General technical requirements

GOST 34059-2017: Internal buildings and structures utilities. Arrangement of heating, heating and cooling water supply systems. General technical requirements

GOST 34233.4-2017: Vessels and apparatus. Norms and methods of strength calculation. Calculation of the strength and tightness of flange connections

GOST 34610-2019: Pipe fittings. Electric drives. General specifications

GOST 4285-79: Blow-off connection for 19 mm diameter air hoses. Specifications

GOST 4860.1-83: Glands for for electric cables and wires

GOST 5044-79: Thin-walled steel drums for chemical products

GOST 5105-82: Steel fuel and oil tanks

GOST 5635-80: Glass dissipators for autotractor, motor-cycle and bicycle lighting and light signalling apparatus. Specifications

GOST 5727-88: Safe glass for ground transport

GOST 5799-2022: Flasks for paints and varnishes. Specifications

GOST 5799-78: Flasks for paints and varnishes. Specifications

GOST 6247-79: Steel welded barrels with rolling hoops on the shell

GOST 7025-91: Ceramic and calcium silicate bricks and stones. Methods for water absorption and density determination and frost resistance control

GOST 8220-85: Underground fire hydrants. Specifications

GOST 8462-85: Wall materials. Methods for determination of ultimate compressive and bending strength

GOST 9.504-85: Unified system of corrosion and ageing protection. Materials of packing on paper base. Method of testing protective capability

GOST R 12.4.013-97: Occupational safety standards system. Goggles. General specifications

GOST R 22.9.06-96: Safety in emergencies. Elastic and power rescuing constructions. General technical requirements

GOST R 50982-2003: Fire equipment. Specialized fire department tools. General technical requirements. Test methods

GOST R 50982-2009: Fire equipment. Specialized fires department tools. General technical requirements. Test methods

GOST R 50982-2019: Fire fighting equipment. Tool for special work in fires. General technical requirements. Test methods

GOST R 50982-96: Fire equipment. Specialized fire department tools. General requirements. Test methods

GOST R 51044-97: Spectacle lenses. General specifications

GOST R 51268-99: Scissors. General specifications

GOST R 51803-2001: Road general-purpose mobile belt conveyors. General specifications

GOST R 52172-2003: Glass units for vehicles glazing. Specifications

GOST R 52434-2005: Active infra-red detectors. General technical requirements and test methods

GOST R 52569-2006: Frits. Specifications

GOST R 52569-2018: Frits. Specifications

GOST R 52582-2006: Looks for protective designs. Requirements and test methods for resistance to criminal open without lock breakage and to burglary

GOST R 52857.4-2007: Vessels and apparatus. Norms and methods of strength calculation. Stength and leak-tightness calculation of flange joints

GOST R 53950-2010: Ophthalmic optics. Uncut finished spectacle lenses. General specifications

GOST R 53961-2010: Fire-fighting equipment. Underground fire hydrants. General technical requirements. Test methods

GOST R 54574-2011: Steel drums for paint materials. Specifications

GOST R 55064-2012: Sodium hydroxide for industrial use. Specifications

GOST R 55156-2012: Mining equipment. Mine belt stage loader. General technical requirements and test methods

GOST R 55162-2012: Mining equipment. Pneumatic hammers. Safety requirements and test methods

GOST R 55472-2013: Gas distribution systems. Requirements for gas distribution networks. Part 0. General

GOST R 55472-2019: Gas distribution systems. Gas distribution networks of natural gas. Part 0. General

GOST R 55511-2013: Pipeline valves. Electric actuators. General specifications

GOST R 55760-2013: Generating sets driven by internal combustion engines. Rules of marking, packing, transportation and storage

GOST R 56680-2015: Polymer composites. Determination facing’s mechanical flexural properties of sandwich construction by long beam flexure method

GOST R 56681-2015: Polymer composites. Determination of mechanical characteristics by compression of unidirectional reinforcement materials by four-point bending of sandwich beam

GOST R 58089-2018: Mining equipment. Suspension gears for mine cages. General specifications

GOST R 58864-2020: Tool cabinets made of metal. General specifications

GOST R 58873-2020: Marine instrument glands for single electric cables input. Specifications

GOST R ISO 7176-13-96: Wheelchairs. Methods of tests for determination of coefficient of friction of test surfaces

IM 14-18-2005: Automation. Instruments for measuring and controlling the composition and properties of substances. Directory

ITP 52-89: Instructions for the design of enterprises for the primary processing of flax

MU 34-70-106-85: Procedural Guidelines for Preservation of Standby Equipment of Stationary Electric Power Generating Stations

ODM 218.6.004-2011: Guidelines for road safety ensuring rope guardrails

OST 153-39.3-051-2003: Gas-distribution system technical maintenance. Main regulations. Gas-distribution network and gas equipment. Tank and balloon plants

OST 26-01-1298-81: Flange of vessels and apparatuses made of titanium. Types, Design and dimensions. Strength and integrity calculation procedure.

OST 26-07-2027-80: Symbols of materials in the design documentation.

OST 26-07-596-72: Electric drives for pipeline fittings. Export including tropical climate countries. General requirements.

OST 26-11-14-88: Pressure-operated vessels and devices. Gas and liquid leak check methods.

OST 26-2011-83: Welded vessels and apparatus hatches. Technical requirements.

PKO-2010.6: Reference materials for the design work of the electrical part of the project

RD 24.207.07-90: Pipe fittings. Gaskets sealing. Dimensions and materials

RD 26-15-88: Vessels and apparatus. Norms and methods of strength and tightness calculation for flanged joints.

RD 34.10.302-87: Consumption rates of wearing parts and materials for crushing-milling machines of DFM-II type and their modifications

RD 34.10.351: Specified Quantity Allowances for Materials for Repair of Turbine Generators

RD 34.35.618: Explosionproof Indicating Electrical Contact Pressure Gauges Type VE-16rb. Guide to Overhaul

RD 34.39.201: Guidelines for Installation of Steam and Water Piping Systems in Thermal Power Stations

RD 34.47.602-75: Guidelines for the overhaul of the VMD-35 oil circuit breaker

RD 34.47.605-78: Guidelines for the overhaul of the oil switch VMG-10-630-20 and VMG-10-1000-20

RD 34.47.611-75: Manual overhaul of air circuit breakers VVN-220-15 and VVN-330-15

RD 34.47.613-74: Guidelines for the overhaul of the oil circuit breaker VMP-10P

RD 34.47.615-75: Manual overhaul of the oil circuit breaker VMK-110-2000-12, 5 VI

RD EO 0198-2000: Maintenance and repair of NP systems and equipment. Assembly of flange connections. General technical requirements

RST RSFSR 91-78: Percussion musical instruments. General technical requirements

RTM 24-85: Information index of state, republican and industry standards, technical specifications for materials and products used in the design of furnaces and dryers

RTM 31.3017-78: Method for Calculation of Prestressed Piles and Hollow-Core Piles for Dynamic Conditions During Driving

SN 551-82: Guidelines for the Design and Construction of Percolation-Proof Assemblies Made of Polyethylene Film for Manmade Water Reservoirs

SP 409.1325800.2018: Pipelines trunk and field for oil and gas. Work on the installation of thermal and anticorrosive insulation, monitoring of work

SP 42-101-2003: The general provision and construction gas distribution sistem from steel and polyethyelene pipes

SP 73.13330.2012: Internal sanitary-technical systems

SP 73.13330.2016: Internal sanitary-technical systems

ST TsKBA 058-2008: Pipe fittings. Gaskets of paronite and rubber. Sizes and technical requirements

ST TsKBA 070-2009: Pipe fittings. Symbol of materials in the design documentation

ST TsKBA 087-2010: Pipe fittings. Electric drives. General technical conditions

TU 102-587-91: Production-auxiliary box

VNTP 3-92: Temporary norms of technological designation of processing plants

VSN 01-78: Instructions for the design and manufacture of tank equipment of armopolimerbetona

VSN 32-81: Guidelines for hydraulic insulation of structures of bridges and pipes in railway, automobile and city roads

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Fastening parts for detachable connections of nuclear power plants. Specifications.
Language: English
Price: $599.94
Environment. Water quality. Waste water to supply to the sewerage system. General requirements
Language: English
Price: $203.40
Hot-rolled sheet. Range
Language: English
Price: $157.41
Unified system for design documentation. Specifications
Language: English
Price: $280.17
The liquids for electronic nicotine delivery systems. General specifications
Language: English
Price: $130.68
Rolled plate of unalloyed and alloyed steel for boilers and vessels working under pressure. Technical conditions
Language: English
Price: $237.60
Metals. Method for testing the impact strength at the low, room and high temperature
Language: English
Price: $90.09
Carbon structural quality steel gauged bars with special surface finish. General specifications
Language: English
Price: $159.39
Corrosion-resistant, heat-proof, and heat-resistant thin-sheet rolled stock
Language: English
Price: $169.29
Carbon and alloy steel forgings for thermal and nuclear power stations equipment and pipelines. Technical specifications.
Language: English
Price: $349.47
Slotters. Standards of accuracy and rigidity
Language: English
Price: $209.88
Crane rails. Specifications
Language: English
Price: $78.21
Construction in seismic regions
Language: English
Price: $553.00
Loads and impacts
Language: English
Price: $306.00
Cocoa-powder. Specifications
Language: English
Price: $214.83
Stainless steels and corrosion resisting, heat-resisting and creep resisting alloys. Grades
Language: English
Price: $216.81
Pipeline valves. Leakage rates of valves
Language: English
Price: $494.01

YOUR ORDERING MADE EASY! is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!