imgalt

GOST R 55473-2013

ГОСТ Р 55473-2013

Gas distribution systems. Requirements for gas distribution networks. Part 1. Polyethylene gas pipelines

Системы газораспределительные. Требования к сетям газораспределения. Часть 1. Полиэтиленовые газопроводы

Status: Effective - Introduced for the first time till 09/01/2019. IUS 12-2013

This standard establishes requirements for the design, construction, reconstruction and operation of polyethylene gas pipelines of gas distribution networks with a maximum operating pressure of up to 1.2 MPa, inclusive, at a pipe wall temperature from minus 20 ° C to 40 ° C

Настоящий стандарт устанавливает требования к проектированию, строительству, реконструкции и эксплуатации полиэтиленовых газопроводов сетей газораспределения с максимальным рабочим давлением до 1,2 МПа включительно, при температуре стенки трубы от минус 20 °C до 40 °C

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Federal Agency for Technical Regulation and Metrology, 7/5/2013

SKU: RUSS65555

Price: $316.00



imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 23 Hydraulic and pneumatic systems and components for general use. »

Welding regulations » Main materials »

Welding regulations » Pipelines »

Welding regulations » Metal structures »

Welding regulations » Welding materials »

Welding regulations » Welding staff »

Welding regulations » Certification »

Welding regulations » Documentation »

Welding regulations » Non-destructive control »

Welding regulations » Heat treatment »

Welding regulations » Assembly devices »

Welding regulations » Main materials » Steel, cast iron »

Welding regulations » Main materials » Polymers »

Welding regulations » Welding materials » Wire »

Welding regulations » Welding materials » Gases »

Standards for pipe fittings (TPA) » 3. Piping valves (TPA) standards for industries » 3.7 For construction and housing and communal services »

Standards for pipe fittings (TPA) » 3. Piping valves (TPA) standards for industries » 3.2 For gas industry »

ISO classifier » 23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS » 23.040 Pipelines and their components »

National standards » 23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS » 23.040 Pipelines and their components »

ISO classifier » 23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS » 23.040 Pipelines and their components » 23.040.01 Pipelines and their components in general »

National standards » 23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS » 23.040 Pipelines and their components » 23.040.01 Pipelines and their components in general »


The Document is Replaced With:

GOST R 55473-2019: Gas distribution systems. Gas distribution networks of natural gas. Part 1. Polyethylene gas pipelines

The Document References:

GOST 15846-2002: Production for transportation to the areas of Far North and similar regions. Packing, marking, transportation and storage

GOST 18599-2001: Polyethylene pressure pipes. Specifications

GOST 21650-76: Means of fastening tared and break bulk cargoes in the loads units. General requirements

GOST 24105-80: Plastics products. Terms and definitions of defects

GOST 2930-62: Measuring instruments. Characters and signs

GOST 9.602-2005: Unified system of corrosion and ageing protection. Underground constructions. General requirements for corrosion protection

GOST R 1.0-2012: Standardization in the Russian Federation. Basic provisions

GOST R 50838-2009: Polyethylene pipes for the supply of gaseous fuel. Specifications

GOST R 52779-2007: Polyethylene fittings for gas pipelines. General specifications

GOST R 53865-2010: Gas distribution systems. Terms and definitions

GOST R 55472-2013: Gas distribution systems. Requirements for gas distribution networks. Part 0. General

GOST R 55474-2013: Gas distribution systems. Requirements for gas distribution networks. Part 2. Steel gas pipelines

GOST R ISO 12176-1-2011: Plastics pipes and fittings. Equipment for fusion jointing polyethylene systems. Part 1. Butt fusion

GOST R ISO 12176-2-2011: Plastics pipes and fittings. Equipment for fusion jointing polyethylene systems. Part 2. Electrofusion

GOST R ISO 3126-2007: Plastics piping systems. Plastics components of piping systems. Determination of dimensions

RD 03-495-02: Procedures for the qualification test of welders and welding work specialists

The Document is Referenced By:

GOST R 55472-2013: Gas distribution systems. Requirements for gas distribution networks. Part 0. General

GOST R 56290-2014: Gas distribution systems. Requirements to gas distribution networks. Part 3. Renovation

GOST R 58095.0-2018: Gas distribution systems. Requirements for gas consumption networks. Part 0. General

GOST R 58181-2018: Gas distribution systems. Requirements to gas distribution networks. Part 7. Polyethylene gas pipelines laid inside the existing pipeline

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Industrial process measurement and control equipment. Reliability. General requirements and test methods
Language: English
Price: $201.00
imgalt
Gauged corrosion-resistant, heat-resistant and high-temperature steel shape
Language: English
Price: $398.00
imgalt
System for ensuring the reliability and safety of construction sites. Loads and impacts. design standards
Language: English
Price: $98.48
imgalt
Heating, ventilation and air conditioning. Fire Safety Requirements
Language: English
Price: $295.00
imgalt
Reliability of atomic power stations and their equipment. General statements and reliability index nomenclature
Language: English
Price: $299.00
imgalt
Electromagnetic compatibility of technical equipment. Technical equipment for nuclear power plants. Requirement and test methods
Language: English
Price: $282.00
imgalt
Billets made of corrosion-resistant steels of 12Х18Н9Т, 12Х18Н10Т, 08Х18Н10Т, 10Х17Н13М2Т, 12Х18Н12Т and 03Х21Н32М3Б types.
Language: English
Price: $96.00
imgalt
Dependability in technics. Terms and definitions
Language: English
Price: $233.00
imgalt
System of products development and launching into manufacture. Technical assignment. Requirements to contents and form of presentation
Language: English
Price: $542.00
imgalt
Reliability in technology. Composition and general rules for setting reliability requirements
Language: English
Price: $205.00
imgalt
Rails of types P38 and P42. Technical conditions
Language: English
Price: $109.00
imgalt
Stainless corrosion resisting, heat-resisting and creep resisting steel and alloy on iron-nickel-based products. Specifications
Language: English
Price: $282.00
imgalt
Natural gas for industrial and municipal purposes. Technical conditions
Language: English
Price: $267.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!