GOST R 52082-2003
ГОСТ Р 52082-2003
|
|
Support polymeric outdoor insulators for voltage 6-220 kV. General specifications
Изоляторы полимерные опорные наружной установки на напряжение 6-220 кВ. Общие технические условия
Status: Effective - Introduced for the first time
This standard applies to outdoor polymer insulators for outdoor installation, designed to isolate and mount current-carrying parts in electrical devices and distribution devices of power stations and AC substations with voltage of 6-220 kV and frequency up to 100 Hz
Настоящий стандарт распространяется на опорные полимерные изоляторы наружной установки, предназначенные для изоляции и крепления токоведущих частей в электрических аппаратах и распределительных устройствах электрических станций и подстанций переменного тока напряжением 6-220 кВ частотой до 100 Гц
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstandart of Russia,
6/10/2003
SKU: RUSS65673
The Product is Contained in the Following Classifiers:
ISO classifier »
29 ELECTRICAL ENGINEERING »
29.080 Insulation »
29.080.10 Insulators »
National standards »
29 ELECTRICAL ENGINEERING »
29.080 Insulation »
29.080.10 Insulators »
National Standards for KGS (State Standards Classification) »
Latest edition »
E Power and electrical equipment »
E3 Electrical materials and insulators »
E35 Insulators »
The Document is Replaced With:
GOST R 52082-2023: Polymer insulators for outdoor installation for voltage 3-750 kV. General technical conditions
The Document References:
GOST 1033-79: Fatty cup grease. Specifications
GOST 10390-86: Electrical equipment for voltages 3 kV and higher. Test methods of electric strength of external insulation in conditions of contamination
GOST 1050-88: Carbon structural quality steel gauged bars with special surface finish. General specifications
GOST 1133-71: Forged round and square steel. Dimensions
GOST 12.2.007.0-75: Occupation safety standards system Electrical equipment. General safety requirements
GOST 12.2.007.3-75: Occupational safety standard system. Electrotechnical devices for voltage more than 1 000 v
GOST 1414-75: Construction steel with enhanced and high machinability
GOST 14192-96: Cargo marking
GOST 15.309-98: System of product development and launching into manufacture. Test and acceptance of produced goods. Principal positions
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 1516.2-97: Electrical equipment and installations for a.c. voltage 3 kV and higher. General methods of dielectric tests
GOST 1516.3-96: Electrical equipment for a.c. voltages from 1 to 750 kV. Requirements for dielectric strength of insulation
GOST 15543.1-89: Electrical articles. General requirements for environmental climatic aspects stability
GOST 1583-93: Aluminium casting alloys. Specifications
GOST 15846-2002: Production for transportation to the areas of Far North and similar regions. Packing, marking, transportation and storage
GOST 17412-72: Electrical articles for the cold climate regions. Technical requirements, acceptance and test methods
GOST 17512-82: Electric equipment and installations for 3 kV and higher. Measuring methods during high - voltage tests
GOST 18321-73: Statistical quality control. Item random sampling methods
GOST 20074-83: Electrical equipment and installations. Method measurements of partial discharge characteristics
GOST 21140-88: Containers
GOST 22261-94: Measuring instruments for electrical
GOST 23216-78: Electrotechnical products. Storage, transportation, temporary corrosion protection and packing. General requirements and test methods
GOST 23706-93: Direct action analog electrical
GOST 2590-88: Round steel bars. Dimensions
GOST 2591-88: Square Hot-rolled Steel Bars Dimensions
GOST 26093-84: Ceramic insulators. Test methods
GOST 26196-84: Insulators. Method of measuring industrial radio interferences
GOST 26358-84: Pig iron castings
GOST 26838-86: Wooden boxes and roof boardings. Standards of mechanical strength
GOST 28779-90: Solid electrical insulating materials. Methods of test for the determination of the flammability when exposed to an igniting source
GOST 380-94: Normal quality carbon steel
GOST 4543-71: Structural alloyed steel
GOST 5781-82: Hot-rolled steel for reinforcement of ferroconcrete structures. Specifications
GOST 5959-80: Uncollapsable wooden sheet material boxes for weights to 200 kg mass. General specifications
GOST 6267-74: Grease ЦИАТИМ-201. Specifications
GOST 6433.3-71: Solid electrical insulating materials. Methods for evaluation of electrical strength at a. c. voltage at power (50 Hz) frequency and d. c. voltage
GOST 7417-75: Calibrated round steel
GOST 9.307-89: Unified system of corrosion and ageing protection. Hot-dip zinc coatings. general requirements and methods of checking
GOST 9142-90: Boxes of corrugated board. General specifications
GOST 9396-88: Boxes wooden reusable
GOST 977-88: Steel castings. General specifications
GOST 9920-89: A.c. electrical installations for voltage from 3 to 750 kV. Creepage distance of external insulation
GOST R 51163-98: Thermodiffusion zinc coatings on fasteners and other small products. General requirements and control methods
GOST R 51177-98: Overhead line hardware. General specifications
The Document is Referenced By:
GOST R 52725-2007: Surge arresters for a.c. electrical installations for voltage from 3 kV to 750kV. General specifications
GOST R 52725-2021: Non-linear surge arresters for alternating current power installations with voltages from 3 to 750 kV. General specifications
GOST R 55167-2012: Surge arresters for power supply systems of electrified railways. General specifications
GOST R 58018-2017: Interim composite polymeric supports for overhead power lines voltage 35-220 kV. General specifications
GOST R 58021-2017: Composite polymeric supports for overhead power lines of voltage 6-20 kV. General specifications
GOST R 58786-2019: Electrical equipment for nuclear power plants. General technical requirements
GOST R 59032.4-2020: Electricity transmission by direct current of high voltage. AC side harmonic filter specification and design guide. Part 4. Equipment
PNST 164-2016: Electric equipment for nuclear power plants. General technical requirements
SP 85.13330.2016: Overhead contact lines of electrified transport
|
Customers Who Viewed This Item Also Viewed:
 |
Tight and slack wooden barrels
Language: English |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Software for measuring instruments. Procedure for of certification. General provisions
Language: English |
Vegetable oils. General technical requirements
Language: English |
Current transformers. General specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.