GOST 32597-2013
ГОСТ 32597-2013
|
|
Copper and copper alloys. Defects of stocks and semifinished products
Медь и медные сплавы. Виды дефектов заготовок и полуфабрикатов
Status: Effective - Introduced for the first time. IUS 3-2015
This standard establishes the types of defects in ingots, rolled and extruded billets, semi-finished products and finished products from copper, nickel and alloys based on them: bars, profiles, wires, plates, sheets, strips, tapes, pipes and tubes, fittings. The standard does not cover defects of multilayer and clad semifinished products and semifinished products with special surface finish (bimetals, zinc-graphic and offset sheets, finished foil), and also shaped castings. defects. Requirements for product quality establish standards for finished products, and the defects listed in this standard are not final rejection signs.
Настоящий стандарт устанавливает виды дефектов слитков, катаных и прессованных заготовок, полуфабрикатов и готовой продукции из меди, никеля и сплавов на их основе: прутков, профилей, проволоки, плит, листов, полос, лент, труб и трубок, фитингов. Стандарт не распространяется на дефекты многослойных и плакированных полуфабрикатов и полуфабрикатов со специальной отделкой поверхности (биметаллы, цинко-графические и офсетные листы, фольга с отделкой), а также фасонных отливок.Настоящий стандарт не определяет технические требования к качеству продукции, а устанавливает только определения видов дефектов. Требования к качеству продукции устанавливают стандарты на готовую продукцию, а перечисленные в настоящем стандарте дефекты не являются окончательными браковочными признаками
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
12/30/2013
SKU: RUSS65748
The Product is Contained in the Following Classifiers:
ISO classifier »
01 GENERAL PROVISIONS. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION »
01.040 Dictionaries »
01.040.77 Metallurgy (Dictionaries) »
National standards »
01 GENERAL PROVISIONS. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION »
01.040 Dictionaries »
01.040.77 Metallurgy (Dictionaries) »
National Standards for KGS (State Standards Classification) »
Latest edition »
V Metals and metal products »
V5 Non-ferrous metals and their alloys. Rolled non-ferrous metals »
V59 Test methods. Packaging. Marking »
The Document References:
GOST 25501-82: Stocks and semi finished products of non-ferrous metals and alloys. Terms and definitions
The Document is Referenced By:
GOST 10025-2016: Tin-phosphor bronze rods. Specifications
GOST 10155-2016: Manganin uninsulated wire. Specification
GOST 1018-2015: Aluminium, copper, brass and cupronickel strips for capsules. Specifications
GOST 1048-2016: Strips of aluminium bronze for springs. Specifications
GOST 10988-2016: Oxygen-free copper bars for electrovacuum industry. Specifications
GOST 11383-2016: Thin-walled copper and brass tubes. Specification
GOST 1150-2018: Boiler zinc plates. Specifications
GOST 12393-2019: Rail contact network fittings linear. General specifications
GOST 13073-2018: Zinc wire.Technikal requirements. Specifications
GOST 13083-2016: Rods of nickel and nickel-silicon alloys. Specifications
GOST 13548-2016: Thin-walled tubes of nickel and nickel alloys. Specification
GOST 15040-2016: Oxygen-free copper pipes. Specification
GOST 1525-2015: Rods of monel. Specifications
GOST 1535-2016: Copper rods. Specifications
GOST 15515-2016: Nickel electrolyzed strips. Specifications
GOST 15834-2016: Beryllium bronze wire. Specification
GOST 15885-2018: Tin-zinc-lead bronze ribbons and strips. Specifications
GOST 16358-2019: Copper tapes for coaxial trunk cables. Technical conditions
GOST 167-2018: Lead tubes. Specifications
GOST 17217-2018: Tubes of copper-nickel alloy МНЖ 5-1. Specifications
GOST 1761-2016: Tin-phosphorus and tin-zinc bronze ribbons and strips. Specifications
GOST 1790-2016: Wire made of chromel alloy T, alumel, copes and constantan for thermoelectrodes of thermoelectric converters. Specification
GOST 20707-2015: Copper and brass ribbons for radiators. Specifications
GOST 2132-2015: Nickel anodes. Specifications
GOST 2170-2016: Strips of nickel and nickel low alloys. Specifications
GOST 2205-2016: L-90 tapes and strips for plating. Specifications
GOST 22666-2016: Copper wire and kopel alloy wire for low-temperature thermoelectrical transducers. Specifications
GOST 2622-2016: Manometric tubes made of bronze БрОФ4-0,25 and brass Л63. Specifications
GOST 2624-2016: Copper and brass capillary tubes. Specification
GOST 2936-2016: Planc-oval scamless radiator tubes. Specifications
GOST 5063-2016: Ribbons of cupro-nikel alloys. Specifications
GOST 5189-2018: Constantan strips. Specifications
GOST 5220-2018: Germen silver wire. Specifications
GOST 5222-2016: Silicon-manganese bronze wire. Specifications
GOST 529-2015: Radiator tubes. Specifications
GOST 5638-2018: Copper roil foil for technical purposes. Specifications
GOST 618-2014: Aluminum foil for technical purposes. Specifications.
GOST 6688-2016: Brass bars of rectangular section. Specifications
GOST 767-2020: Copper anodes. Specifications
GOST 89-2018: Rolled-in lead sheets. Specifications
GOST R 58418-2019: Additive technology. Metal powders and wires. Types of defects. Classification, terms and definitions
|
Customers Who Viewed This Item Also Viewed:
 |
Industrial process measurement and control equipment. Reliability. General requirements and test methods
Language: English |
Metals. Methods of tension test
Language: English |
Gauged corrosion-resistant, heat-resistant and high-temperature steel shape
Language: English |
Heating, ventilation and air conditioning. Fire Safety Requirements
Language: English |
Reliability of atomic power stations and their equipment. General statements and reliability index nomenclature
Language: English |
Electromagnetic compatibility of technical equipment. Technical equipment for nuclear power plants. Requirement and test methods
Language: English |
Billets made of corrosion-resistant steels of 12Х18Н9Т, 12Х18Н10Т, 08Х18Н10Т, 10Х17Н13М2Т, 12Х18Н12Т and 03Х21Н32М3Б types.
Language: English |
Dependability in technics. Terms and definitions
Language: English |
System of products development and launching into manufacture. Technical assignment. Requirements to contents and form of presentation
Language: English |
Reliability in technology. Composition and general rules for setting reliability requirements
Language: English |
Stainless corrosion resisting, heat-resisting and creep resisting steel and alloy on iron-nickel-based products. Specifications
Language: English |
Natural gas for industrial and municipal purposes. Technical conditions
Language: English |
Global navigation satellite system. Emergency response system in case of accidents. Test methods for emergency services call device/system for compliance with the requirements for the quality of loudspeaker communication in the vehicle cab.
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.