GOST 24944-81
ГОСТ 24944-81
|
|
PVC film decorative finishing. Specifications
Пленка поливинилхлоридная декоративная отделочная. Технические условия
Status: Effective
The standard applies to PVC finishing decorative film without glue and with a glue layer on the reverse side, protected by special paper. The film is produced by roller-calendaring method from polyvinyl chloride, plasticizers, pigments and various additives. The film is intended for finishing pre-prepared interior surfaces of the walls of residential and public buildings, door panels, built-in furniture, decorative panels and other elements of the interior of rooms, except for evacuation routes in public buildings. The film belongs to the group of combustible materials.
Стандарт распространяется на поливинилхлоридную отделочную декоративную пленку без клеевого слоя и с клеевым слоем на обратной стороне, защищенным специальной бумагой. Пленку изготовляют вальцово-каландровым способом из поливинилхлорида, пластификаторов, пигментов и различных добавок. Пленка предназначается для отделки предварительно подготовленных внутренних поверхностей стен помещений жилых и общественных зданий, дверных полотен, встроенной мебели, отделочных панелей и других элементов интерьеров помещений, кроме путей эвакуации в общественных зданиях. Пленка относится к группе горючих материалов.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstroy of the USSR (State Committee of the Council of Ministers of the USSR for Construction),
7/23/1981
SKU: RUSS65921
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
6. Regulatory documents for building materials and products »
k.66 Finishing and facing materials »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.10 Testing and monitoring products of rubber and plastics industry »
4.10.1 Rubber products »
ISO classifier »
83 RUBBER, RUBBER-TECHNICAL, ASBESTOTECHNICAL AND PLASTIC INDUSTRY »
83.140 Rubber and plastic products »
83.140.10 Films and sheets »
National standards »
83 RUBBER, RUBBER-TECHNICAL, ASBESTOTECHNICAL AND PLASTIC INDUSTRY »
83.140 Rubber and plastic products »
83.140.10 Films and sheets »
National Standards for KGS (State Standards Classification) »
Latest edition »
Zh Construction and building materials »
Zh1 Construction materials »
Zh16 Finishing and facing materials »
National Standards for OKSTU »
POLYMERS, PLASTIC MASSES, CHEMICAL FIBERS AND RUBBERS »
Film materials (films, tapes) based on polymerization resins »
National Standards for OKSTU »
CONSTRUCTION MATERIALS, EXCEPT REFINED CONCRETE STRUCTURES AND PARTS »
Polymeric finishing materials for roofing, waterproofing and sealing »
As a Replacement Of:
GOST 5.1984-73: Polyvinyl chloride decorative film. Quality requirements for certified products
The Document References:
GOST 11529-86: PVC materials for floors. Methods of control
GOST 12.1.044-89: Fire and explosion hazard of substances and materials. Nomenclature of indices and methods of their determination
GOST 12301-81: Cartons made from cardboard, paper
GOST 14192-96: Cargo marking
GOST 14236-81: Polymer films. Tensile strength test method
GOST 17308-88: Twines. Specifications
GOST 18300-87: Technical rectified ethyl alcohol. Specifications
GOST 19433-88: Dangerous goods. Classification and marking
GOST 2789-73: Surface roughness. Parameters and characteristics
GOST 30244-94: Building materials. Methods for combustibility test
GOST 30402-96: Building materials Ignitability Test Meth
GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications
GOST 6507-90: Micrometers. Specifications
GOST 7251-77: Polyvinilohloride linoleum with woven and unwoven backing. Specifications
GOST 7502-98: Measuring metal tapes. Specifications
GOST 8273-75: Packing paper
The Document is Referenced By:
GOST 26138-84: Elements of built-in furniture and entresol for residential buildings. Specifications
GOST 475-78: Wooden doors. General specifications
RD 107.460007.007-92: Plastic materials. Selection manual.
RST RSFSR 516-88: Eaves metal. Technical conditions
TU 1811-064-04696843-99: Material "Armofol". Technical Specifications
TU 2255-059-04696843-99: Heat Reflecting Vapor-Tight Film "TEPAR". Technical Specifications
VSN 49-96: Instruction on application technology of rolled polyvinyl-chloride finish materials.
|
Customers Who Viewed This Item Also Viewed:
 |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Unified system for design documentation. Types and sets of design documentation
Language: English |
Loads and impacts
Language: English |
High strength rolled steel. General specification
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Articulated connector devices with cast male and female parts for freight cars of articulated type. General technical specifications
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
