GOST 31819.22-2012
ГОСТ 31819.22-2012
|
|
Electricity metering equipment (а.с.). Particular requirements. Part 22. Static meters for active energy classes (0,2S and 0,5S)
Аппаратура для измерения электрической энергии переменного тока. Частные требования. Часть 22. Статические счетчики активной энергии классов точности 0,2S и 0,5S
Status: Effective - Introduced for the first time. IUS 6-2013
The standard applies to static (electronic) watt-hour meters of accuracy classes 0.2S and 0.5S for measuring electrical active energy in AC networks at 50 or 60 Hz and establishes requirements for the production and testing of meters. The standard applies only to meters operating from transformers, intended for indoor use and containing a measuring element and counting mechanism (s) enclosed in a meter body. It also applies to the operation indicator (s) and test output (s). If the meter has a measuring element for measuring energy of more than one type (meters for different types of energy) or if other functional elements are enclosed in the meter case, such as maximum readings, electronic tariff recorders, time switches, remote control receivers, data interfaces and etc., then the relevant standards or regulatory documents for these elements are applied. The standard does not apply to: a) watt-hour meters with a voltage between terminals over 600 V (line voltage for multi-phase meters); b) portable meters and meters intended for outdoor installation; c) data interfaces to the counter counting mechanism; d) reference meters
Стандарт распространяется на статические (электронные) счетчики ватт-часов классов точности 0,2S и 0,5S для измерения электрической активной энергии в сетях переменного тока частотой 50 или 60 Гц и устанавливает требования к производству и испытаниям счетчиков. Стандарт распространяется только на счетчики, работающие от трансформаторов, предназначенные для применения внутри помещения и содержащие измерительный элемент и счетный(е) механизм(ы), заключенные в корпус счетчика. Он также распространяется на индикатор(ы) функционирования и испытательный(е) выход(ы). Если счетчик имеет измерительный элемент для измерения энергии более чем одного вида (счетчики на энергию разных видов) либо если в корпус счетчика заключены другие функциональные элементы, такие как показатели максимума, электронные регистраторы тарифов, переключатели по времени, приемники дистанционного управления, интерфейсы передачи данных и т.д., то тогда применяют соответствующие стандарты или нормативные документы на эти элементы. Стандарт не распространяется на: а) счетчики ватт-часов с напряжением между зажимами свыше 600 В (линейное напряжение для многофазных счетчиков); б) переносные счетчики и счетчики, предназначенные для наружной установки; в) интерфейсы данных к счетному механизму счетчика; г) эталонные счетчики
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
11/22/2012
SKU: RUSS66003
The Product is Contained in the Following Classifiers:
Evidence base (TR CU, Technical Regulation of the Customs Union) »
020/2011 TR CU. Electromagnetic compatibility of technical means »
Regulations and standards (to ТР ТС ТС 020/2011) »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
3 Activities of testing laboratories »
3.2 Technical equipment of testing laboratories »
3.2.2 Measuring instruments and test equipment »
3.2.2.4 Instruments for electrical and magnetic measurements »
ISO classifier »
17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA »
17.220 Electricity. Magnetism. Electrical and magnetic measurements »
17.220.20 Measurement of electrical and magnetic quantities »
National standards »
17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA »
17.220 Electricity. Magnetism. Electrical and magnetic measurements »
17.220.20 Measurement of electrical and magnetic quantities »
The Document References:
GOST 31818.11-2012: Electricity metering equipment (а.с). Particular General requirements. Tests and test conditions. Part 11. Meters for electric energy
GOST 7746-2015: Current transformers. General specifications
The Document is Referenced By:
GOST IEC 61557-12-2015: Electric distribution networks with low voltage up to 1000 V AC and 1500 V DC. Electrical safety. Apparatus for testing, measuring or monitoring protective equipment. Part 12. Measurement and control devices for performance (PMD)
GOST R 56750-2015: Electricity metering equipment (a.c.). Particular requirements. Meters with analogue inputs connected to the low-power sensor (electronic transformers) of voltage and current
GOST R 8.655-2009: State system for ensuring the uniformity of measurements. Quality factors of electric power measuring instruments. General specification
GOST R IEC 62282-3-200-2014: Fuel cell technologies. Part 3-200. Stationary fuel cell power systems. Performance test method
MI 3000-2018: Recommendation. State system for ensuring uniformity of measurements. Systems automated information-measuring commercial accounting of electric energy. Method of verification
MP 001-2020: System automated information and measuring commercial accounting of electricity (AIIS KUE) Severstal Ropes JSC Volgogradsky Branch. Verification Method
MP 006-2019: System automated information-measuring commercial accounting of electricity (AIIS KUE) MP EMR
MP 206.1-176-2018: Automated information-measuring system for commercial accounting of electricity (AIIS KUE) of the traction substation "Kirenga" of the East Siberian Railway branch of the Russian Railways OJSC within the boundaries of the Irkutsk Region
MP 206.1-230-2018: System automated information and measuring commercial accounting of electricity (AIIS KUE) of PJSC
MP 312235-076-2020: System automated information measuring commercial accounting of electricity AIIS KUE UNEG PS 220 kV Megion. Verification Method
MP 312235-077-2020: RUSENERGOSBYT LLC automated information measuring system for commercial accounting of electric energy (AIIS KUE) for energy supply of the branch of BUNGE CIS LLC in Kolodeznoye. Verification Method
MP KCSM-186-2019: Channels measuring systems of automated information-measuring commercial metering of electricity AIIS KUE UNEG Substation 330 kV "Gubkin". Verification method
PNST 159-2016: Automatic information and measuring system of commercial accounting of electric energy. General specifications
SP 256.1325800.2016: Electrical equipment of residential and public buildings. Rules of design and erection
|
Customers Who Viewed This Item Also Viewed:
 |
Controllers acting without
Language: English |
Building materials. Methods for combustibility test
Language: English |
Building materials spread flame test method
Language: English |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English |
Clear sheet glass. Specifications
Language: English |
Natural gas. Methods of calculation of physical properties. Calculation of physical properties on base information on density of standards conditions and nitrogen and carbon dioxide contents
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
