GOST R 50982-2003
ГОСТ Р 50982-2003
|
|
Fire equipment. Specialized fire department tools. General technical requirements. Test methods
Техника пожарная. Инструмент для проведения специальных работ на пожаре. Общие технические требования. Методы испытаний
Status: Not effective - Superseded. IUS 2-2010
The standard applies to manual non-mechanized and mechanized tools (hereinafter - tools) for special work on the opening and dismantling of building and other structures, metal door and window openings during fire fighting, of the following types: - manual non-mechanized tools: fire axes, hooks, crowbars, hooks, devices for cutting overhead power lines and internal wiring, devices for opening metal doors on fires, as well as multi-purpose station wagon kits a tool for rescue operations in a fire; - manual mechanized tool driven by: electric motor, internal combustion engine, compressed air, hydraulic unit; - elastomer pneumatic jacks, pneumatic plugs and pneumatic plasters.
Стандарт распространяется на ручной немеханизированный и механизированный инструмент (далее - инструмент) для проведения специальных работ по вскрытию и разборке строительных и других конструкций, металлических дверных и оконных проемов при тушении пожара, следующих видов: - ручной немеханизированный инструмент: пожарные топоры, багры, ломы, крюки, устройства для резки воздушных линий электропередач и внутренней электропроводки, устройства для вскрытия металлических дверей на пожарах, а также комплекты многофункционального универсального инструмента для проведения аварийно-спасательных работ на пожаре; - ручной механизированный инструмент с приводом от: электродвигателя, двигателя внутреннего сгорания, сжатого воздуха, гидроагрегата; - эластомерные пневмодомкраты, пневмозаглушки и пневмопластыри.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstandart of Russia,
8/12/2003
SKU: RUSS66135
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
13 Environmental protection, protection of people from environmental exposure. Security »
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
IV Fire safety »
3 Fire safety equipment »
ISO classifier »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.220 Fire protection »
13.220.10 Fire fighting »
National standards »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.220 Fire protection »
13.220.10 Fire fighting »
National Standards for KGS (State Standards Classification) »
Latest edition »
G Machines, equipment and tools »
G8 Machinery and equipment of universal application »
G88 Fire fighting vehicles, equipment and inventory »
National Standards for OKSTU »
CONSTRUCTION, ROAD AND UTILITY ENGINEERING PRODUCTS »
Fire fighting equipment »
The Document is Replaced With:
GOST R 50982-2009: Fire equipment. Specialized fires department tools. General technical requirements. Test methods
As a Replacement Of:
GOST R 50982-96: Fire equipment. Specialized fire department tools. General requirements. Test methods
The Document References:
GOST 1050-88: Carbon structural quality steel gauged bars with special surface finish. General specifications
GOST 112-78: Meteorological glass thermometers
GOST 11516-94: Hand-held hot-line tools
GOST 12.2.013.0-91: Electrical hand-held tools
GOST 12.2.013.6-91: Occupational safety standards system. Electric hand-held tools. Specific safety requirements and methods of testing hammers and drills
GOST 12.2.037-78: Fire engineering. Safety requirements
GOST 13837-79: General purpose dynamometers
GOST 14254-96: Degrees of protection provided by enclosures (IP Code)
GOST 1435-99: Bars, strips and reels of tool unalloyed steel. General specifications
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 166-89: Vernier callipers. Specifications
GOST 16714-71: Non-mechanized hand fire instruments. Specifications
GOST 17752-81: Hydraulic and pneumatic drive. Terms and definitions
GOST 18516-80: Gasoline power saws. Rig trial methods
GOST 2.601-95: Operational documents
GOST 20.39.108-85: General requirements complex system. Human factors, inhabitancy and technical aesthetics requirements. Nomenclature and order of choice
GOST 22.9.01-97: Safety in emergencies. Emergency and rescue tools and equipment. General technical requirements
GOST 2405-88: Pressure gauges, vacuum gauges, pressure-vacuum gauges, pressure meters, draft gauges and draft-pressure gauges
GOST 25577-83: Steel bent closed welded square and rectangular sections. Specifications
GOST 27.003-90: Reliability in engineering. Make-up and general rules for assigning reliability requirements
GOST 27.410-87: Industrial product dependability. Inspection methods of reliability indices and plans of check tests on reliability
GOST 28957-91: Hoists
GOST 29329-92: Balance for static weightings
GOST 305-82: Diesel fuel. Specifications
GOST 3262-75: Water-supply and gas-supply steel pipes Technical conditions
GOST 380-88: Common quality carbon steel. Grades
GOST 380-94: Normal quality carbon steel
GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications
GOST 6794-75: Oil АМГ-10. Specifications
GOST 7338-90: Rubber and rubber-fabric sheets. Specifications
GOST 7502-98: Measuring metal tapes. Specifications
GOST 82-70: Universal hot-rolled steel wide strips. Dimensions
GOST 9.030-74: Unified system of corrosion and ageing protection. Vulcanized rubbers. Method of testing resistance to attack by corrosive media in limp state
GOST R 22.9.01-95: Safety in emergencies. Emergency and rescue tools and equipment. General technical requirements
GOST R 50982-96: Fire equipment. Specialized fire department tools. General requirements. Test methods
GOST R 51105-97: Gasoline for combustion engines. Unleaded gasoline. Specifications
GOST R 52026-2003: Forestry machinery. Petrol power chain-saws, bush-cutters and grass-trimmers. Methods of measuring the technical data of internal-combustion engines
The Document is Referenced By:
GOST R 50982-2009: Fire equipment. Specialized fires department tools. General technical requirements. Test methods
Customers Who Viewed This Item Also Viewed:
|
Limit dimension deviation from 0,1 to 10000 mm and surface shape and arrangement allowances, not specified on drawings.
Language: English |
Rules of development, coordination, approval and composition of technical and economic assessment for construction
Language: English |
Mineral fertilizers. Method for determination of dynamic strength and attrition
Language: English |
Diesel fuel EURO. Specifications
Language: English |
Inch thread with a profile angle of 55 degrees
Language: English |
Vessels and apparatus. Norms and methods of strength calculation. General requirements
Language: English |
Norms of structural design of nuclear power plants with reactors of different types
Language: English |
|
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.