GOST R 52763-2007
ГОСТ Р 52763-2007
|
|
Climatic environment stability test methods for machines, instruments and other industrial products. Tests for exposure to salt mist
Методы испытаний на стойкость к климатическим внешним воздействующим факторам машин, приборов и других технических изделий. Испытания на воздействие соляного тумана
Status: Not effective - Canceled. Registration information 1075-st dated 09/10/2014 (Rosstandart official website)
This standard applies to machines, devices and other technical products of all kinds; metals and alloys, parts and components thereof; protective and decorative and protective coatings against corrosion used in these products, and establishes the methods of their testing for the impact of salt mist, corresponding to the sea, in particular, tests to check the conformity of products to the technical requirements specified in the regulatory documentation for the products, including according to GOST 15150, GOST R 51801 and GOST R 51909, as well as research tests to determine the resistance of products, materials and systems of materials and coatings to the effects of salt fog. The standard is used in conjunction with GOST 30630.0.0 and GOST R 51372
Настоящий стандарт распространяется на машины, приборы и другие технические изделия всех видов; металлы и сплавы, детали и узлы из них; защитно-декоративные и защитные покрытия от коррозии, применяемые в этих изделиях, и устанавливает методы их испытаний на воздействие соляного тумана, соответствующего морскому, в частности, испытаний для проверки на соответствие изделий техническим требованиям, указанным в нормативной документации на изделия, в том числе в соответствии с ГОСТ 15150, ГОСТ Р 51801 и ГОСТ Р 51909, а также исследовательские испытания для определения стойкости изделий, материалов и систем материалов и покрытий к воздействию соляного тумана. Стандарт применяют совместно с ГОСТ 30630.0.0 и ГОСТ Р 51372
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
10/18/2007
SKU: RUSS66213
The Product is Contained in the Following Classifiers:
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
2 Tests for external factors »
2.1 General requirements for tests on external factors »
ISO classifier »
19 TESTS »
19.040 Climatic tests »
National standards »
19 TESTS »
19.040 Climatic tests »
National Standards for KGS (State Standards Classification) »
Latest edition »
T General technical and organizational and methodological standards »
T5 Documentation System »
T51 Documentation system that determines indicators of quality, reliability and durability of products »
The Document References:
Federal Law 184-FZ: About technical regulation
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 17433-80: Industrial purity. Compressed air. Grades of contamination
GOST 1770-74: Laboratory volumetric glassware. Cylinders, beakers, measuring flasks, test tubes. General specifications
GOST 25336-82: Laboratory glassware and equipment. Basic parameters and dimensions
GOST 26883-86: Exposure factors. Terms and definitions
GOST 27597-88: Electronics items. Corrosion resistance evaluation method
GOST 30630.0.0-99: Environment stabilty test methods for machines, instruments and other industrial products. General requirements
GOST 4233-77: Reagents. Sodium chloride. Specifications
GOST 492-73: Nickel, nickel and copper-nickel alloys treated under pressure. Grades
GOST 6709-72: Distilled water. Specifications
GOST 9.308-85: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. Procedures for accelerated corrosion tests
GOST 9.311-87: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. Method of corrosion damage evaluation
GOST 9.908-85: Unified system of corrosion and ageing protection. Metals and alloys. Methods for determination of corrosion and corrosion resistance indices
GOST 9045-93: Cold-rolled thin sheets of low-carbon steel for cold stamping. Specifications
GOST R 1.0-2004: Standardization in the Russian Federation. Basic provisions
GOST R 51369-99: Climatic environment stability test methods machines, instruments and other industrial products. Test for influence of humidity
GOST R 51372-99: Accelerated life and storable life tests methods in special aggressive and other special medias for technical products, material and systems of materials. General
GOST R 51801-2001: General requirements for machines, instruments and other industrial products as to chemically active and other special media endurance
GOST R 51802-2001: Aggressive and other special media stability test methods for machines, instruments and other industrial products
GOST R 51909-2002: Environment stability test methods for machines, instruments and other industrial products. Tests for transportation and storage
The Document is Referenced By:
GOST 16962.1-89: Electrical articles. Test methods as to environments climatic factors resistance
GOST ISO 4042-2015: Fasteners. Electroplated coatings
GOST R 52161.2.40-2008: Safety of household and similar electrical appliances. Part 2.40. Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers
GOST R 52161.2.59-2008: Safety of household and similar electrical appliances. Part 2.59. Particular requirements for insect killers
GOST R 54482-2011: Piping connections for general-use hydraulic fluid power. Hose fittings with metric stud ends and O-ring. Technical requirements
GOST R 54988-2012: Explosive atmospheres. Technical requirements and test methods for endurance to environmental factors influencing the peculiarities of operation of equipment in explosive atmospheres
GOST R 55001-2012: General requirements for performance of chambers for industrial products environments endurance tests. Certification methods for chambers (without load) for salt spray tests
GOST R IEC 61534.1-2014: Powertrack systems. Part 1. General requirements
GOST R IEC 61701-2013: Photovoltaic modules. Salt mist corrosion testing
GOST R IEC 62561.1-2014: Lightning protection system components (LPSC). Part 1. Requirements for connection components
GOST R IEC 62561.2-2014: Lightning protection system components (LPSC). Part 2. Requirements for conductors and earth electrodes
GOST R IEC 62561.3-2014: Lightning protection system components. Part 3. Requirements for isolating spark gaps
GOST R IEC 62561.4-2014: Lightning protection system components (LPSC). Part 4. Requirements for conductor fasteners
|
Customers Who Viewed This Item Also Viewed:
 |
Dependability in technics. Dependability management. Analysis techniques for reliability. General principles
Language: English |
Tobacco and tobacco product. Determination of phosphor organic pesticides. Thin layer chromatographic method
Language: English |
Tobacco and tobacco product. Determination of chloro-organic pesticides. Thin layer chromatographic method
Language: English |
Oil. General specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
