GOST R 53808-2010

ГОСТ Р 53808-2010

Automobile engines. Camshafts. Technical requirements and test methods

Двигате��и автомобильные. Валы распределительные. Технические требования и методы испытаний

Status: Effective - Introduced for the first time

This standard applies to automotive engine camshafts.

Настоящий стандарт распространяется на распределительные валы автомобильных двигателей

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Federal Agency for Technical Regulation and Metrology, 7/7/2010

SKU: RUSS66261

Price: $266.00




The Product is Contained in the Following Classifiers:

Evidence base (TR CU, Technical Regulation of the Customs Union) » 018/2011 TR CU. On safety of wheeled vehicles » Regulations and standards (to 018/2011 TR CU) »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.14 Testing and monitoring of vehicles and equipment » 4.14.1 Motor vehicles and equipment »

ISO classifier » 43 ROAD TRANSPORT TECHNOLOGY » 43.060 Internal combustion engines for road vehicles » 43.060.01 Internal combustion engines for road vehicles in general »

National standards » 43 ROAD TRANSPORT TECHNOLOGY » 43.060 Internal combustion engines for road vehicles » 43.060.01 Internal combustion engines for road vehicles in general »

ISO classifier » 43 ROAD TRANSPORT TECHNOLOGY » 43.060 Internal combustion engines for road vehicles » 43.060.30 Cooling systems. Lubrication systems »

National standards » 43 ROAD TRANSPORT TECHNOLOGY » 43.060 Internal combustion engines for road vehicles » 43.060.30 Cooling systems. Lubrication systems »

National Standards for KGS (State Standards Classification) » Latest edition » D Vehicles and packaging » D2 Cars, tractors and tow trucks » D24 automotive engines and parts for them »


The Document References:

Federal Law 184-FZ: About technical regulation

GOST 1050-88: Carbon structural quality steel gauged bars with special surface finish. General specifications

GOST 12344-2003: Alloyed and high-alloyed steels. Methods for determination of carbon

GOST 12345-2001: Alloyed and high-alloyed steels. Methods of sulphur determination

GOST 12346-78: Alloyed and high-alloyed steels. Methods of silicon determination

GOST 12347-77: Alloyed and high-alloyed steels. Methods for determination of phosphorus

GOST 12348-78: Alloyed and high-alloyed steels. Methods of manganese determination

GOST 12349-83: Alloyed and high-alloyed steels. Methods for determination of tungsten

GOST 12350-78: Alloyed and high-alloyed steels. Methods of chromium determination

GOST 12351-2003: Alloyed and highalloyed steels. Methods for determination of vanadium

GOST 12352-81: Steels alloyed and highalloyed. Methods for the determination of nickel

GOST 12353-78: Alloyed and high-alloyed steels. Methods of cobalt determination

GOST 12354-81: Steels alloyed and highalloyed. Methods for the determination of molybdenum

GOST 12355-78: Alloyed and high-alloyed steels. Methods of copper determination

GOST 12356-81: Steels alloyed and highalloyed. Methods of the determination of titanium

GOST 12357-84: Steels alloyed and highalloyed. Methods for the, determination of aluminium

GOST 12362-79: Alloy and high-alloy steels. Methods for determination of stibium, lead, tin, zinc and cadmium

GOST 12363-79: Steels alloyed and highalloyed. Methods for the determination of selenium

GOST 12364-84: Steels alloyed and highalloyed. Methods for the determination of cetium

GOST 12365-84: Steels alloyed and highalloyed. Methods for the determination of zirconium

GOST 1412-85: Flakish graphite cast iron

GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence

GOST 22536.0-87: Carbon steel and unalloyed cast iron. General requirements for methods of analysis

GOST 22536.10-88: Carbon steel and unalloyed cast iron. Methods for determination of alluminium

GOST 22536.11-87: Carbon steel and unalloyed cast iron. Methods for determination of titanium

GOST 22536.12-88: Carbon steel and unalloyed cast iron. Methods for determination of vanadium

GOST 22536.1-88: Carbon steel and unalloyed cast iron. Methods for determination of general carbon and graphite

GOST 22536.2-87: Carbon steel and unalloyed cast iron. Methods for the determination of sulfur

GOST 22536.3-88: Carbon steel and unalloyed cast iron. Methods for determination of phosphorus

GOST 22536.4-88: Carbon steel and unalloyed cast iron. Methods for determination of silicon

GOST 22536.5-87: Carbon steel and unalloyed cast iron. Methods for determination of manganese

GOST 22536.6-88: Carbon steel and unalloyed cast iron. Methods for determination of arsenic

GOST 22536.7-88: Carbon steel and unalloyed cast iron. Methods for determination of chromium

GOST 22536.8-87: Carbon steel and unalloyed cast iron. Methods for determination of copper

GOST 22536.9-88: Carbon steel and unalloyed cast iron. Methods for determination of nickel

GOST 24643-81: Basic norms of interchangeability. Tolerances of form and position of surfaces. Numerical values

GOST 2789-73: Surface roughness. Parameters and characteristics

GOST 3443-87: Cast iron castings with graphite of different form. Methods of structure determination

GOST 4543-71: Structural alloyed steel

GOST 4832-95: Foundry pig iron. Specifications

GOST 7293-85: Cast iron with globular graphite for foundry

GOST 8.051-81: State system for ensuring the uniformity measurements. Permissible errors of measurement of linear dimensions to 500 mm

GOST 9012-59: Metals. Method of Brinell hardness measurement

GOST 9013-59: Metals. Method of measuring Rockwell hardness

GOST 977-88: Steel castings. General specifications

GOST R 1.0-2004: Standardization in the Russian Federation. Basic provisions

GOST R 50779.30-95: Statistical methods. Acceptance sampling. General requirements

GOST R 8.568-97: State system for ensuring the uniformity of measurements. Verification of testing equipment. General principles

GOST R ISO 2859-1-2007: Statistical methods. Sampling procedures for inspection by attributes. Part 1. Sampling schemes indexed by acceptance quality limit for lot-by-lot inspection

GOST R ISO/TR 8550-1-2007: Statistical methods. Guide to the selection and usage of acceptance sampling systems for inspection of discrete items in lots. Part 1. General requirements

M 12: Methods for measuring the mass concentration of aluminum in industrial emissions into the atmosphere by the photometric method with aluminon

The Document is Referenced By:

Decision 219: The list of international and regional (interstate) standards, and in their absence - national (state) standards, the application of which on a voluntary basis to ensure compliance with the requirements of the technical regulations of the Customs Union "On the safety of wheeled vehicles". (TR CU 018/2011), and a list of international and regional (interstate) standards, and in their absence - national (state) standards containing the rules and methods of research (tests) and measurements, including sampling rules necessary for the application and implementation of the requirements of technical regulations of the Customs Union "On the safety of wheeled vehicles" (TR CU 018/2011) (TR CU 018/2011) and conformity assessment of objects of technical regulation

Customers Who Viewed This Item Also Viewed:

Petroleum for oil-processing plants. Specifications
Language: English
Price: $18.00
Industrial gas burners. General technical requirements
Language: English
Price: $152.00
Electrical articles. General requirement for environment mechanical stability
Language: English
Price: $28.00
Rules of Electrical Installations Design (Russian Electrical Code). 7th Edition. All sections and exhibits
Language: English
Price: $478.76
Power transformer on-load tap-changing devices. General specifications
Language: English
Price: $167.00
Conical pipe thread. Profile, basic dimensions and tolerances
Language: English
Price: $71.00
Glass and glass products. Visual faults. Terms and definitions
Language: English
Price: $158.00
Industrial gas burners. Test methods
Language: English
Price: $204.00
Glass and glass products. Inspection methods for geometric parameters and appearance
Language: English
Price: $110.00
Weldable deformed reinforcing rolled products of A500C and B500C classes for reinforcement of concrete constructions. Specifications
Language: English
Price: $112.00
Crude petroleum. General specifications
Language: English
Price: $58.00
Power transformers. Test methods of tap changing devices
Language: English
Price: $626.00
Unified system for design documentation. Stages of designing
Language: English
Price: $71.00
White sugar. Specifications
Language: English
Price: $279.00
Stainless steels and corrosion resisting, heat-resisting and creep resisting alloys. Grades
Language: English
Price: $215.00
Rolled of normal, increased - and high-strength steel for shipbuilding. Specifications
Language: English
Price: $1,639.74
Guidelines for the photometric determination of hydrogen sulfide in the air
Language: English
Price: $62.00
Tempered glass. Specifications.
Language: English
Price: $149.00
Glass with low emissivity hard coating. Specifications.
Language: English
Price: $212.00
Glass laminated. Specifications.
Language: English
Price: $231.00

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!