GOST R 54832-2011
ГОСТ Р 54832-2011
|
|
Alarms are guarding point magnetic contact. General requirements and test methods
Извещатели охранные точечные магнитоконтактные. Общие технические требования и методы испытаний
Status: Effective - Introduced for the first time. IUS 12-2012
This standard applies to newly developed and upgraded detectors security point magnetic contact, installed in the premises, including repositories of valuables. Announcers are designed to work in alarm systems according to GOST R 50775 in order to generate an alert for an alarm when unauthorized tearing off the moving parts of the building and (or) protective structures or movements of objects. This standard should be used in conjunction with GOST R 50775, GOST R 52435. The standard does not apply to special-purpose detectors.
Настоящий стандарт распространяется на вновь разрабатываемые и модернизируемые извещатели охранные точечные магнитоконтактные, устанавливаемые в помещениях, в т.ч. хранилищах ценностей. Извещатели предназначены для работы в системах тревожной сигнализации по ГОСТ Р 50775 с целью формирования извещения о тревоге при несанкционированном отрывании подвижных частей строительных и(или) защитных конструкций или перемещений предметов. Настоящий стандарт должен применяться совместно с ГОСТ Р 50775, ГОСТ Р 52435. Стандарт не распространяется на извещатели специального назначения
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
12/13/2011
SKU: RUSS66300
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
13 Environmental protection, protection of people from environmental exposure. Security »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.15 Testing and control of products of electronic, optical and electrical industry »
4.15.4 Means of measurement, control, management and testing »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
3 Activities of testing laboratories »
3.2 Technical equipment of testing laboratories »
3.2.2 Measuring instruments and test equipment »
3.2.2.8 Regulation, automatics and telemechanics »
ISO classifier »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.320 Alarm and warning systems »
National standards »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.320 Alarm and warning systems »
National Standards for KGS (State Standards Classification) »
Latest edition »
P Measuring devices. Automation and computing facilities »
P7 Regulation, automatics and telemechanics »
P77 Devices and equipment for telemetry, telecontrol and telealarm »
The Document References:
Federal Law 162-FZ: About standardization in the Russian Federation
GOST 14192-96: Cargo marking
GOST 14254-2015: Degrees of protection provided by enclosures (IP Code)
GOST 15.009-91: Non-food consumer goods
GOST 15.309-98: System of product development and launching into manufacture. Test and acceptance of produced goods. Principal positions
GOST 15.601-98: System of product development and launching into manufacture. Industrial products maintenance. Principal positions
GOST 17499-82: Magnetically operated contacts. Terms and definitions
GOST 17809-72: Casting hard magnetic materials. Marks
GOST 18321-73: Statistical quality control. Item random sampling methods
GOST 19150-84: Magnetically-operated sealed switches. General specifications
GOST 2.053-2013: Unified system for design documentation. Product electronic structure. General principles
GOST 2.124-2014: Unified system for design documentation. Procedure for use of over-the-counter goods.
GOST 2.601-2013: Unified system for design documentation. Exploitative documents
GOST 2.610-2006: Unified system for design documentation. Rules for making exploitative documents
GOST 24297-2013: Verification of purchased product. Organization and methods of control
GOST 24698-81: Wooden external doors for dwellings and public buildings. Types, structure and dimensions
GOST 25639-83: Casting permanent magnets. Specifications
GOST 26342-84: Means of alarm, fire and alarm-fire systems. Types, basic parameters and dimensions.
GOST 26828-86: Instrumentation and machine building products. Marking
GOST 28198-89: Basic environmental testing. Part 1. General and quidance
GOST 28203-89: Basic environmental testing procedures. Part 2. Tests. Test Fc and guidance: Vibration ( sinusoidal )
GOST 28594-90: Domestic radioelectronic equipment
GOST 30668-2000: Electronic components. Marking
GOST 31174-2017: Gates of metall. General specifications
GOST 31817.1.1-2012: Alarm systems. Part 1. General requirements. Section 1. General
GOST 475-2016: Door Blocks wooden and combined. General specifications
GOST 4784-97: Aluminium and wrought aluminium alloys. Grades
GOST 7502-98: Measuring metal tapes. Specifications
GOST 8.051-81: State system for ensuring the uniformity measurements. Permissible errors of measurement of linear dimensions to 500 mm
GOST IEC 60065-2013: Audio, video and similar electronic apparatus. Safety requirements
GOST IEC 60335-1-2015: Household and similar electrical appliances. Safety. Part 1. General requirements
GOST IEC 60947-7-1-2016: Low-voltage switchgear and controlgear. Part 7-1. Ancillary equipment. Terminal blocks for cooper conductors
GOST IEC 60950-1-2014: Information technology equipment. Safety. Part 1. General requirements
GOST ISO/IEC 17025-2009: General requirements for the competence of testing and calibration laboratories
GOST MEK 60335-1-2008: Household and similar electrical appliances. Safety. Part 1. General requirements
GOST R 2.601-2019: Unified system of design documentation. Operational documents
GOST R 2.610-2019: Unified system of design documentation. Rules for the implementation of operational documents
GOST R 50009-2000: Electromagnetic compatibility of technical equipment. Components of intruder alarm systems. Requirement and test methods
GOST R 50030.7.1-2009: Low-voltage switchgear and control gear. Part 7.1. Ancillary equipment. Terminal blocks for copper conductors
GOST R 50775-95: Alarm systems. Part 1. General requirements. Section 1. General
GOST R 50776-95: Alarm systems. Part 1. General requirements. Section 4. Code of practice
GOST R 52161.1-2004: Safety of household and similar electrical appliances. Part 1. General requirements
GOST R 52435-2015: Alarm intruder technical means. Classification. General technical requirements and test methods
GOST R 52436-2005: Control equipment of intruder and intruder-fire alarm systems. Classification. General technical requirements and test methods
GOST R 52551-2016: Protection and security systems. Terms and definitions
GOST R 52931-2008: Instruments for process monitoring and control. General specifications
GOST R 52956-2008: Hard magnetic sintered materials on basis neodymium-iron-boron alloys. Classification. Main parameters
GOST R 53228-2008: Non-automatic weighing instruments. Part 1. Metrological and technical requirements. Tests
GOST R 53560-2009: Intruder alarm systems. Power supply units. Classification. General technical requirements. Test methods
GOST R 55375-2012: Primary aluminium and alloys based on it. Grades
GOST R 8.568-2017: State system for ensuring the uniformity of measurements. Verification of testing equipment. General principles
GOST R IEC 60065-2009: Audio, video and similar electronic apparatus. Safety requirements
GOST R IEC 60068-2-1-2009: Environmental testing. Part 2-1.Tests. Test A: Cold
GOST R IEC 60068-2-2-2009: Environmental testing. Part 2-2. Tests. Test B: Dry heat
GOST R IEC 60173-99: Colours of the cores of flexible cables and cords
GOST R IEC 60950-1-2009: Information technology equipment. Safety. Part 1. General requirements
GOST R ISO 10012-2008: Enterprise management. Measurement management systems. Requirements for measurement processes and measuring equipment
GOST R ISO 22742-2006: Automatic identification. Bar coding. Linear bar code and two dimensional symbols for product packaging
GOST R ISO 7619-2-2009: Rubber, vulcanized or thermoplastic. Determination of indentation hardness. Part 2. IRHD pocket meter method of measurement
GOST R ISO/TR 8550-1-2007: Statistical methods. Guide to the selection and usage of acceptance sampling systems for inspection of discrete items in lots. Part 1. General requirements
The Document is Referenced By:
GOST R 52435-2015: Alarm intruder technical means. Classification. General technical requirements and test methods
GOST R 56102.2-2015: Centralized security monitoring systems. Part 2. Subsystem for mounting at protected facility. General technical requirements and test methods
GOST R 56677-2015: Means of physical protection engineering. Coding, identification and marking. General requirements
GOST R 57788-2017: Protective blocks for windows and doors in protected premises. General specifications
R 069-2017: Recommendations on the selection and use of penetration detection tools, depending on the degree of importance and danger of protected objects
R 081-2019: Guidelines. The selection and use of technical means of protection to protect the cultural heritage of the Russian Federation from criminal attacks
R 084-2019: Requirements for the functional properties of technical security equipment at facilities subject to mandatory protection by the troops of the National Guard of the Russian Federation and the rules for their mandatory confirmation of compliance with the established technical requirements
R 78.36.028-2012: Technical devices for intrusion and threat detection of various types. Peculiarities of choice, operation and use depending on the degree of importance and hazard of the facilities
R 78.36.035-2013: Recommendations for the organization of a comprehensive centralized protection of banking self-service devices
|
Customers Who Viewed This Item Also Viewed:
 |
Metals. Methods of tension test
Language: English |
Liquids for aircrafts systems. Method for determination thermo oxidizing stability and corrosion activity
Language: English |
Natural gas for industrial and municipal purposes. Technical conditions
Language: English |
Global navigation satellite system. Emergency response system in case of accidents. Test methods for emergency services call device/system for compliance with the requirements for the quality of loudspeaker communication in the vehicle cab.
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
