imgalt

GOST R 55160-2012

ГОСТ Р 55160-2012

Mining equipment. Mine face conveyers jacks. General technical requirements and test methods

Оборудование горно-шахтное. Передвижчики конвейеров гидравлические шахтные. Общие технические требования и методы испытаний

Status: Effective - Introduced for the first time. IUS 5-2014

This standard applies to mine hydraulic units designed to move scraper curving conveyors to bottomhole in lavas up to 250 m in length with a reservoir thickness of more than 0.55 m and a dip angle of up to 25 ° equipped with narrow-grained coal-mining combines with an executive arm width of up to 0.8 m or plow installations and individual metal lining. The standard establishes general technical requirements for hydrotransmitters in the design, production, completeness, transportation of assembly units, installation, commissioning, operation and disposal in order to protect the life or health of hydrotreater personnel, environmental protection, and safety requirements and test methods

Настоящий стандарт распространяется на шахтные гидропередвижчики, предназначенные для перемещения к забою скребковых изгибающихся конвейеров в лавах длиной до 250 м c мощностью пласта более 0,55 м и углом падения до 25°, оборудованных узкозахватными угледобывающими комбайнами с шириной захвата исполнительного органа до 0,8 м или струговыми установками и индивидуальной металлической крепью. Стандарт устанавливает общие технические требования к гидропередвижчикам при проектировании, производстве, комплектности, транспортировании сборочных единиц, монтаже, наладке, эксплуатации и утилизации в целях защиты жизни или здоровья обслуживающего персонала гидропередвижчиков, охраны окружающей среды, а также требования ��езопасности и методы испытаний

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Federal Agency for Technical Regulation and Metrology, 11/22/2012

SKU: RUSS66308

Price: $329.67



imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 73 Mining and minerals »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.13 Testing and control of products of engineering industry » 4.13.2 Machines and equipment for special purposes » 4.13.2.4 Machines and equipment for mining, oil industry and quarrying »

ISO classifier » 73 MINING AND MINERAL PRODUCTS » 73.100 Mining equipment » 73.100.40 Equipment for haulage and lifting »

National standards » 73 MINING AND MINERAL PRODUCTS » 73.100 Mining equipment » 73.100.40 Equipment for haulage and lifting »

National Standards for KGS (State Standards Classification) » Latest edition » G Machines, equipment and tools » G4 Machinery and equipment for heavy industry » G49 Test methods. Packaging. Marking »


The Document References:

GOST 10354-82: Polyethylene film Specifications

GOST 12.1.003-83: Noise. General safety requirements

GOST 12.1.005-88: General sanitary requirements for working zone air

GOST 12.2.003-91: Industrial equipment. General safety requirements

GOST 12.2.007.0-75: Occupation safety standards system Electrical equipment. General safety requirements

GOST 12.2.106-85: Occupational safety standards system. Machines and mechanisms for mining of ore, non-ore and placer deposits. General hygienic requirements and methods of testing

GOST 12969-67: Plates for machines and devices. Technical requirements

GOST 12971-67: Rectangular plates for machines and devices. Dimensions

GOST 14192-96: Cargo marking

GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence

GOST 15846-2002: Production for transportation to the areas of Far North and similar regions. Packing, marking, transportation and storage

GOST 16504-81: The state system of testing products. Product test and quality inspection. General terms and definitions

GOST 17108-86: Positive-displacement hydraulic drive and lubricating systems. Methods of parameters measurement

GOST 17168-82: Octave and one-third-of-octave electronic filters

GOST 17187-2010: Noise meters Part 1 Technical requirements

GOST 2.601-2006: Unified system for design documentation. Exploitative documents

GOST 21753-76: Man -machine system control levers

GOST 22613-77: Man-machine system. Rotary switches and commutators. General ergonomic requirements

GOST 22614-77: «Man-machine» system. Key-actuated and push-button switches and commutators. General ergonomic requirements

GOST 23170-78: Packing for products of engineering industry. General requirements.

GOST 24054-80: Engineering and instrument production items. Leak detection methods. General requirements

GOST 2405-88: Pressure gauges, vacuum gauges, pressure-vacuum gauges, pressure meters, draft gauges and draft-pressure gauges

GOST 24444-87: General assembly and technological requirements

GOST 24754-81: General purpose mining electric equipment

GOST 27039-86: Mobile flight face conveyors. General safety requirements

GOST 2991-85: Wooden uncollapsible cases for weights up to 500 kg. General specifications

GOST 31177-2003: Safety of machinery. Safety requirements for fluid power systems and their components. Hydraulics

GOST 31319-2006: Vibration. Measurement and evaluation of human exposure to whole-body vibration. Practical guidance for measurement at the workplace

GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications

GOST 5378-88: Vernier protractors. Specifications

GOST 7502-98: Measuring metal tapes. Specifications

GOST 9.014-78: Unified system of corrosion and ageing protection. Temporary corrosion protection of products. General requirements

GOST 9.032-74: Unified, system of corrosion and ageing protection. Paint coatings. Groups, technical requirements and designations

GOST 9.104-79: Unified system corrosion of corrosion and ageing protection. Paint coatings. Croups of operation conditions

GOST R 12.1.019-2009: Occupational safety standards system. Electrical safety. General requirements and nomenclature of kinds of protection

GOST R 15.201-2000: System of product development and launching into manufacture. Products of industrial and technical designation. Procedure of product development and launching into manufacture

GOST R 50460-92: Mark of conformity for obligatory certification form, dimensions dnd technical requirements

GOST R 51330.0-99: Explosionproof electrical apparatus. Part 0. General requirements

GOST R 51402-99: Noise of machine. Determination of power levels of noise sources using sound pressure. Survey method using an enveloping measurement surface over a reflecting plane

GOST R 52152-2003: Long wall powered roof chocks. Basic parameters. General technical requirements. Test methods

GOST R 54775-2011: Powered support pumping stations. General technical requirements. Test methods

GOST R 8.568-97: State system for ensuring the uniformity of measurements. Verification of testing equipment. General principles

PB 05-618-03: Coal Mine Safety Regulations

PR 50.2.006-99: State system for ensuring uniformity of measurements. The procedure for calibration of measuring instruments

RD 05-325-99: Safety standards for main mining and transport equipment for coal mines

SN 2.2.4/2.1.8.566-96: Industrial vibration. Vibration in premises of residential and public buildings

The Document is Referenced By:

GOST R 58200-2018: Mining equipment. Powered face systems. General safety requirements

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Seamless hot-deformed steel pipes. Specifications
Language: English
Price: $57.42
imgalt
Seamless hot-deformed steel pipes. Range of sizes
Language: English
Price: $77.22
imgalt
Processing equipment and process pipelines
Language: English
Price: $155.43
imgalt
Instructions on Designing of Steel Process Piping, Рnom up to 10 MPa
Language: English
Price: $320.76
imgalt
Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
Language: English
Price: $262.35
imgalt
Federal norms and rules in the field of the use of atomic energy. Valves for nuclear power plants. General technical requirements
Language: English
Price: $1,478.07
imgalt
Unified system for design documentation. Diagrams. Kinds and types. General requirements for fulfillment.
Language: English
Price: $121.77
imgalt
Chemically resistant and heat resistant ceramic wares. The method for determination of heat resistance
Language: English
Price: $34.65
imgalt
Unified system for program documentation. Types of programs and program documents
Language: English
Price: $55.44
imgalt
Petroleum products. Method of test for water-soluble acids and alkalies
Language: English
Price: $48.51
imgalt
Unified system for design documentation. Repair documents
Language: English
Price: $196.02
imgalt
Chemical production safety passport. General requirements
Language: English
Price: $90.09
imgalt
Unified system for design documentation. Exploitative documents
Language: English
Price: $296.01
imgalt
Unified system for design documentation. Types and sets of design documentation
Language: English
Price: $137.61
imgalt
Food products. Methods for detection and quantity determination of coagulase-positive staphylococci and Staphylococcus aureus
Language: English
Price: $223.74
imgalt
Process piping. Standard for the stress, vibration and seismic analysis
Language: English
Price: $879.12
imgalt
Pipeline valves for nuclear stations. General specifications
Language: English
Price: $1,908.72
imgalt
Flanges for valves, fittings and pipelines for pressure to PN 250. Design, dimensions and general technical requirements
Language: English
Price: $703.89
imgalt
Valves of pipeline technological systems of nuclear power plants, not affecting safety. General technical requirements
Language: English
Price: $523.71
imgalt
Fish products. Canned tuna and bonito in water or oil
Language: English
Price: $159.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!