GOST R 8.778-2011
ГОСТ Р 8.778-2011
|
|
State system for ensuring the uniformity of measurements. Measuring instruments of heat energy hot-water heating systems. Metrological assurance. Main principles
Государственная система обеспечения единства измерений. Средства измерений тепловой энергии для водяных систем теплоснабжения. Метрологическое обеспечение. Основные положения
Status: Effective - Introduced for the first time. IUS 5-2013
This standard applies to measuring instruments of heat energy and coolant parameters in water heating systems and establishes the main provisions relating to their metrological support at the stages of the life cycle
Настоящий стандарт распространяется на средства измерений тепловой энергии и параметров теплоносителя в водяных системах теплоснабжения и устанавливает основные положения, относящиеся к их метрологическому обеспечению на стадиях жизненного цикла
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
12/13/2011
SKU: RUSS66326
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
17 Metrology and measurements. Physical phenomena »
PromExpert »
SECTION II. METROLOGICAL »
I Organizational and technical bases of metrological support »
2 Technical basics of metrological support »
2.2 Standards and verification schemes »
2.2.6 Thermophysical and temperature measurements »
PromExpert »
SECTION II. METROLOGICAL »
I Organizational and technical bases of metrological support »
1 Organization and management of metrological support »
1.1 Basic provisions of metrological support »
ISO classifier »
17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA »
17.020 Metrology and measurements in general »
National standards »
17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA »
17.020 Metrology and measurements in general »
National Standards for KGS (State Standards Classification) »
Latest edition »
T General technical and organizational and methodological standards »
T8 State measurement system »
T84 State standards of physical units and state calibration schemes »
The Document References:
Federal Law 184-FZ: About technical regulation
Federal Law 190-FZ: About heat supply
GOST 26.011-80: Measuring and automation devices. Input and output current and voltage continuous signals
GOST 34.201-89: Information technology. Set of standards for automated systems. Types, sets and indication of documents for automated systems making
GOST 34.601-90: Information technology. Set of standards for automated systems. Automated systems. Stages of development
GOST 34.602-89: Information technology. Set of standards for automated systems. Technical directions for automated system making
GOST 6651-2009: State system for ensuring the uniformity of measurements. Platinum, copper, and nickel resistance resistive temperature transducers. General requirements and test methods
GOST 8.009-84: State system for ensuring the uniformity of measurements. Standardized metrological characteristics of measuring instruments
GOST 8.586.2-2005: State system for ensuring the uniformity of measurements. Measurement of liquids and gases flow rate and quantity by means of orifice instruments. Part 2. Orifice plates. Technical requirements
GOST R 1.0-2004: Standardization in the Russian Federation. Basic provisions
GOST R 51649-2000: Heat meters for water heat supply systems. General specifications
GOST R 8.563-2009: State system for ensuring the uniformity of measurements. Procedures of measurements
GOST R 8.591-2002: State system for ensuring the uniformity of measurements. Two channel heat meters for water heat supply systems. Standardization of admitted error limits in measurements of the used thermal energy by users
GOST R 8.592-2002: State system for ensuring the uniformity of measurements. Thermal energy, received by users in water heat supply system. Typical procedure of measurements
GOST R 8.596-2002: State system for ensuring the uniformity of measurement. Metrological assurance for measuring system. Main principles.
GOST R 8.642-2008: State system for ensuring the uniformity of measurements. Metrological maintenance of measuring systems of units of the account of thermal energy. Main principles
GOST R 8.654-2009: State system for ensuring the uniformity of measurements. Requirements for software of measuring instruments. Main principles
GOST R 8.674-2009: State system for ensuring the uniformity of measurements. General requirements for measuring instruments and systems and devices with measuring function
GOST R EN 1434-1-2011: Heat meters. Part 2. General requirements
GOST R EN 1434-2-2011: Heat meters. Part 2. Constructional requirements
GOST R EN 1434-3-2011: Heat meters. Part 3: Data exchange and interfaces
GOST R EN 1434-4-2011: Heat meters. Part 4. Pattern approval tests
GOST R EN 1434-5-2011: Heat meters. Part 5. Initial verification tests
GOST R EN 1434-6-2011: Heat meters. Part 6. Installation, commissioning, operational monitoring and maintenance
MI 2304-08: GSOEI. Metrological supervision carried out by the metrological services of legal entities. Main provisions
MI 2479-98: Heat meters. Typical test program for type approval purpose
MI 3286-2010: Recommendation. Verifying software protection and determining its level when testing measuring instruments for type approval
MI 3290-2010: State system for ensuring uniformity of measurements. Recommendation on the preparation, execution and review of test materials of measuring instruments for type approval
PR 50.2.006-94: Procedure for calibration of measurement equipment
PR 50.2.016-94: National Measurement Standards. Requirements for Calibration Procedures
R 50.2.077-2011: State system for ensuring the uniformity of measurements. Pattern evaluation of a measuring instrument for pattern approval. Software validation for protection assurance
RMG 29-99: State system for ensuring the uniformity of measurements. Metrology. Basic terms and definitions
RMG 74-2004: State system for ensuring the uniformity of measurements. Methods for determining the intervals of verification and calibration of measuring instruments
The Document is Referenced By:
GOST R 51649-2014: Heat meters for water heat supply systems. General specifications
GOST R 70384-2022: Automation of energy accounting and management. Heat energy metering devices and metering systems based on them. Lifecycle management and metering processes
PNST 761-2023: Security in emergency situations. Safe City. Terms and definitions
|
Customers Who Viewed This Item Also Viewed:
 |
Tight and slack wooden barrels
Language: English |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Construction in seismic regions
Language: English |
2015 Kazakhstan PUE RK Rules for Arrangement of Electrical Installations. ALL SECTIONS.
Language: English |
Software for measuring instruments. Procedure for of certification. General provisions
Language: English |
Current transformers. General specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
