GOST R ISO 6507-1-2007
ГОСТ Р ИСО 6507-1-2007
|
|
Metals and alloys. Vickers hardness test. Part 1. Test method
Металлы и сплавы. Измерение твердости по Виккерсу. Часть 1. Метод измерения
Status: Effective - Introduced for the first time
This standard applies to the method of measuring the hardness of metals and alloys on Vickers scales, as well as thin surface layers and coatings with test loads from 0.09807 to 980.7 N and diagonal lengths of prints from 0.020 to 1.400 mm
Настоящий стандарт распространяется на метод измерения твердости металлов и сплавов по шкалам Виккерса, а также тонких поверхностных слоев и покрытий при испытательных нагрузках от 0,09807 до 980,7 Н и длин диагоналей отпечатков от 0,020 до 1,400 мм
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
11/29/2007
SKU: RUSS66380
The Product is Contained in the Following Classifiers:
PromExpert »
SECTION II. METROLOGICAL »
II Measurements »
2 Measurement of mechanical quantities »
ISO classifier »
17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA »
17.020 Metrology and measurements in general »
National standards »
17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA »
17.020 Metrology and measurements in general »
National Standards for KGS (State Standards Classification) »
Latest edition »
T General technical and organizational and methodological standards »
T6 Classification system, coding and technical and economic information »
T62 Information, library and publishing »
National Standards for KGS (State Standards Classification) »
Latest edition »
T General technical and organizational and methodological standards »
T8 State measurement system »
T80 Rules, norms, regulations infield of ensuring uniformity of measurements »
National Standards for OKSTU »
SYSTEMS OF GENERAL TECHNICAL AND ORGANIZATIONAL-METHODOLOGICAL STANDARDS »
State system for ensuring the uniformity of measurements (GSI) »
The Document References:
Federal Law 184-FZ: About technical regulation
GOST R 1.0-2004: Standardization in the Russian Federation. Basic provisions
GOST R 1.5-2004: Standardization in the Russian Federation. National standards of the Russian Federation. Rules of structure, drafting, presentation and indication
The Document is Referenced By:
GOST 33852-2016: Pipeline valves. Knife gate valves for trunk pipelines. General specifications
GOST 34029-2016: Pipeline accessories. Check fittings for main oil pipelines and oil product pipelines. General specifications
GOST 7370-2015: Railway frogs. Specifications
GOST ISO 22826-2017: Destructive tests on welds in metallic materials. Hardness testing of narrow joints welded by laser and electron beam (Vickers and Knoop hardness tests)
GOST ISO 3506-1-2014: Mechanical properties of fasteners made from corrosion-resistant stainless steel. Part 1. Bolts, screws and studs
GOST ISO 3506-2-2014: Mechanical properties of fasteners made from corrosion-resistant stainless steel. Part 2. Nuts
GOST ISO 3506-3-2014: Mechanical properties of fasteners made from corrosion-resistant stainless steel. Part 3. Setting screws and similar fasteners not under tensile stress
GOST ISO 3506-4-2014: Mechanical properties of fasteners made from corrosion-resistant stainless steel. Part 4. Self-tapping screws
GOST ISO 7092-2016: Plain washers. Small series. Product grade A
GOST ISO 7093-1-2016: Plain washers. Large series. Part 1. Product grade A
GOST ISO 7093-2-2016: Plain washers. Large series. Part 2. Product grade C
GOST ISO 898-1-2014: Mechanical properties of fasteners made of carbon and alloyed steels. Part 1. Bolts, screws and studs with specified property classes with large and small thread pitch
GOST R 50.05.12-2018: Conformity assessment system in the field of atomic energy use. Conformity assessment in the form of control. Monitoring radiation embrittlement of the reactor vessel
GOST R 53342-2009: Medical chisels. Technical requirements and test methods
GOST R 53343-2009: Bone nippers. Technical requirements and test methods
GOST R 53678-2009: Petroleum and natural gas industries. Materials for use in H2S-containing environments in oil and gas production. Part 2. Cracking-resistant carbon and low-alloy steels and the use of cast irons
GOST R 54382-2011: Oil and gas industry. Submarine pipeline systems. General requirements
GOST R 54383-2011: Steel drill pipes for petroleum and natural gas industries. Specifications
GOST R 55020-2012: Pipeline valves. Knife gate valves for trunk pipelines. General specifications
GOST R 55849-2013: Petroleum and natural gas industries. Progressing cavity pump systems for artificial lift. Part 1. Pumps. General technical requirements
GOST R 55850-2013: Petroleum and natural gas industries. Progressing cavity pump systems for artificial lift. Part 2. Surface-drive systems. General technical requirements
GOST R 55877-2013: Glass-reinforced thermosetting plastics (GRP) pipes and fittings. Test methods for determination of resistance to wear by abrasive wheels
GOST R 57338-2016: Mortars for masonry. Method of determination of flexural and compressive strength
GOST R 57349-2016: Bricks and blocks. Compressive strength determination method
GOST R 57351-2016: Building steel structures. General specifications
GOST R 57353-2016: Structural bearings. Part 2. Sliding seismic isolation supports elements of buildings. Specifications
GOST R 57410-2017: Unified system of corrosion and ageing protection. Corrosion protection of wares from non-ferrous metal alloys by diffusion treatment with zinc. General requirements for flow process
GOST R 57411-2017: Unified system of corrosion and ageing protection. Corrosion protection of parts made of cast iron or steels by diffusion processing of zinc. General requirements to flow process
GOST R 57419-2017: Unified system of corrosion and ageing protection. Corrosion protection of parts made of super high and high-strength steels by diffusion treatment with zinc. General requirements for flow process
GOST R 57910-2017: Materials for additive process. Control and tests methods
GOST R 58195-2018: Internal combustion engines. Piston pins. Part 2. Inspection measuring principles
GOST R 58616-2019: Pipe fittings. Regulating fittings for main oil pipelines and oil product pipelines. General specifications
GOST R 70415-2022: Sheaths and rods of actuators of control and protection system of water-water power reactor. Calculation of strength at the stages of design and operation
GOST R 8.695-2009: State system for ensuring the uniformity of measurements. Metals and alloys. Vickers hardness test. Part 2. Verification and calibration of testing machines
GOST R 8.747-2011: State system for ensuring the uniformity of measurements. Metals and alloys. Vickers hardness test. Part 3. Calibration of reference block
GOST R 8.904-2015: State system for ensuring the uniformity of measurements. Metallic materials. Instrumented indentation test for hardness and materials parameters. Part 2. Verification and calibration of testing machines
GOST R 8.977-2019: State system for ensuring the uniformity of measurements. Standard hardness measures. Verification Method
GOST R ISO 10510-2013: Tapping screw and washer assemblies with plain washers
GOST R ISO 10669-2017: Plain washers for tapping screw and washer assemblies. Normal and large series. Product grade A
GOST R ISO 10673-2017: Plain washers for screw with washer assemblies. Small, normal and large series. Product grade A
GOST R ISO 13533-2013: Petroleum and natural gas industries. Drilling and production equipment. Drill-through equipment. General technical requirements
GOST R ISO 13628-2-2013: Petroleum and natural gas industries. Design and operation of subsea production systems. Part 2. Unbounded flexible pipe systems for subsea and marine applications
GOST R ISO 17078-3-2013: Petroleum and natural gas industries. Drilling and production equipment. Part 3. Running tools, pulling tools and kick-over tools and latches for side-pocket mandrels. General technical requirements
GOST R ISO 1797-2018: Dental instruments. Shanks
GOST R ISO 22034-1-2013: Steel wire and wire products. Part 1. General test methods
GOST R ISO 22826-2012: Destructive tests on welds in metallic materials. Hardness testing of narrow joints welded by laser and electron beam (Vickers and Knoop hardness test)
GOST R ISO 2320-2009: Prevailing torque type steel nuts - Mechanical and performance properties
GOST R ISO 3183-2009: Steel pipes for pipelines of petroleum and natural gas industries. General specifications
GOST R ISO 3183-3-2007: Steel pipes for pipelines. Specifications. Part 3. Requirements for class C pipes
GOST R ISO 3506-1-2009: Mechanical properties of corrosion-resistant stainless steel fasteners. Part 1. Bolts, screws and studs
GOST R ISO 3506-2-2009: Mechanical properties of corrosion-resistant stainless steel fasteners Part 2. Nuts
GOST R ISO 3506-3-2009: Mechanical properties of corrosion-resistant stainless steel fasteners. Part 3. Set screws and similar fasteners not under tensile stress
GOST R ISO 3506-4-2009: Mechanical properties of corrosion-resistant stainless steel fasteners. Part 4. Tapping screws
GOST R ISO 8535-1-2017: Diesel engines. Steel pipes for fuel lines high pressure. Part 1. Requirements for seamless cold-deformed pipes
GOST R ISO 8535-2-2017: Diesel engines. Steel tubes for high pressure fuel injection pipes. Part 2. Requirements for composite tubes
GOST R ISO 898-1-2011: Mechanical properties of fasteners made of carbon steel and alloy steel. Part 1. Bolts, screws and studs of specified property classes with coarse thread and fine pitch thread
GOST R ISO 898-2-2013: Mechanical properties of fasteners made of carbon steel and alloy steel. Part 2. Nuts with specified property classes with coarse thread and fine pitch thread
GOST R ISO 898-5-2009: Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5: Set screws and similar threaded fasteners not under tensile stresses
I 1.2.1.02.019.1121-2016: Determination of mechanical properties of metal of equipment of nuclear power plants by means of non-reference technique in terms of hardness characteristics. Instructions
PNST 595-2022: Oil and gas industry. Underwater production systems. General characteristics and rules of application of structural steels for building structures
PNST 605-2022: Oil and gas industry. Underwater production systems. Teleoperated unmanned underwater vehicles tools and their interfaces
PNST 615-2022: Oil and gas industry. Underwater production systems. Completion and workover system. Guidelines
PNST 674-2022: Oil and gas industry. Underwater production systems. Chambers for launching and receiving means of cleaning and diagnostics of pipelines. General specifications
PNST 692-2022: Oil and gas industry. Underwater production systems. Wellhead equipment. Plugging module
ST TsKBA 091-2011: Pipe fittings. Determination of mechanical properties of steel based on hardness measurement
|
Customers Who Viewed This Item Also Viewed:
 |
Controllers acting without
Language: English |
Building materials. Methods for combustibility test
Language: English |
Building materials spread flame test method
Language: English |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English |
Clear sheet glass. Specifications
Language: English |
Natural gas. Methods of calculation of physical properties. Calculation of physical properties on base information on density of standards conditions and nitrogen and carbon dioxide contents
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
