GOST R 55559-2013
ГОСТ Р 55559-2013
|
|
Composite cylinders for liquefied petroleum gases at pressure up to 2,0 MPa. General technical requirements. Test methods
Баллоны композитные для сжиженных углеводородных газов на рабочее давление 2,0 МПа. Общие технические требования. Методы испытаний
Status: Effective - Introduced for the first time. IUS 9-2014
This standard applies to transported refillable composite cylinders with a capacity from 0.5 to 150.0 liters with a working pressure of 2.0 MPa, intended for transportation, storage and use of liquefied petroleum gases according to GOST R 52087. This standard applies to cylinders: - manufactured from a composite material that provides tightness and bears the pressure from the internal pressure (bezlejnerovye); - consisting of an internal non-metallic sealing liner and an outer shell made of composite material, carrying the load from the internal pressure. The standard does not apply to cylinders installed on board vehicles and vessels and intended to provide fuel for the engines of vehicles and vessels on which they are installed.
Настоящий стандарт распространяется на транспортируемые многократно наполняемые композитные баллоны вместимостью от 0,5 до 150,0 л с рабочим давлением 2,0 МПа, предназначенные для транспортирования, хранения и использования сжиженных углеводородных газов по ГОСТ Р 52087. Настоящий стандарт распространяется на баллоны: - изготовленные из композиционного материала, который обеспечивает герметичность и несет нагрузку от внутреннего давления (безлейнеровые); - состоящие из внутреннего герметизирующего неметаллического лейнера и наружной оболочки из композиционного материала, несущей нагрузку от внутреннего давления. Стандарт не распространяется на баллоны, устанавливаемые на борту транспортных средств и судов, и предназначенные для обеспечения топливом двигателей транспортных средств и судов, на которых они установлены
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
9/6/2013
SKU: RUSS66518
The Product is Contained in the Following Classifiers:
Evidence base (TR CU, Technical Regulation of the Customs Union) »
032/2013 TR CU. On safety of overpressure equipment »
Regulations and standards (to 032/2013 TR CU) »
ISO classifier »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.020 Storage tanks for liquids and gases »
23.020.30 Pressure vessels, gas cylinders »
National standards »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.020 Storage tanks for liquids and gases »
23.020.30 Pressure vessels, gas cylinders »
The Document References:
GOST 10456-80: Plastics. Method for determination of incandescence resistance
GOST 11262-80: Plastics. Tensile strength test method.
GOST 11645-73: Plastics method of determination of melt flow index for thermoplastics
GOST 11736-78: Plastics. Method for determination of water content
GOST 12.1.005-88: General sanitary requirements for working zone air
GOST 12.1.044-89: Fire and explosion hazard of substances and materials. Nomenclature of indices and methods of their determination
GOST 12020-72: Plastics. Testing methods of plastics resistance to chemical substances
GOST 12021-84: Plastics and ebonite. Method of determination of deflection under load temperature
GOST 14359-69: Plastics. Testing methods. General requirements of the methods of mechanical testing
GOST 15088-83: Plastics. Method of determination of the Vicat softening temperature of thermoplastics
GOST 15139-69: Plastics. Methods for the determination of density (mass density)
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 15860-84: Steel welded cylinders for liquefied hydrocarbon gases at pressure up to 1.6 MPa.
GOST 16350-80: Climate of the USSR. Regionalizing and statistical parameters of climatic factors for technical purposes
GOST 18249-72: Plastics. Method for viscosity determination of diluted polymer solution
GOST 2.001-93: Unifited system for design documentation. General principles
GOST 2.601-2006: Unified system for design documentation. Exploitative documents
GOST 21207-81: Plastics. Method for determination of flammability
GOST 21553-76: Plastics. Methods for determination of melting temperature
GOST 21793-76: Plastics. Method for determination of the oxygen index
GOST 24998-81: Gauges for tapes thread of valves and gas-bags. Tolerances
GOST 25.604-82: Design calculation and strength testing. Methods of mechanical testing of polymeric composite materials. Test for bending properties at normal, elevated and low temperatures
GOST 25276-82: Polymers. Method for determination of viscosity by rotary viscosimeter at a given shear rate
GOST 3.1001-2011: Unified system for technological documentation. General principles
GOST 31014-2002: Glass filled poliamides profils. Specifications
GOST 4648-71: Plastics. Method of static bending test
GOST 6611.2-73: Textile threads. Methods for determination of breaking load and elongation at rupture
GOST 6943.0-93: Textile glass. Rules of acceptance
GOST 6943.10-79: Glass textile products. Method for determination of breaking load and elogation at rupture
GOST 9.401-91: Unified system of corrosion and ageing protection. Paint coatings. General requirements and methods of accelerated tests on resistance to the action of climatic factors.
GOST R 51753-2001: High pressure cylinders for the compressed natural gas as a fuel for automotive vehicles. General specifications
GOST R 52087-2003: Liquefied hydrocarbon fuel gases. Specifications
The Document is Referenced By:
Decision 96: On the list of international and regional (interstate) standards, and in their absence - national (state) standards, the application of which on a voluntary basis to ensure compliance with the requirements of technical regulations of the Customs Union "On safety of equipment operating under excess pressure" (TR TS 032/2013), and the list of international and regional (interstate) standards, and in their absence - national (state) standards, containing rules and methods of research (tests) and
GOST R 54982-2022: Gas distribution systems. Facilities for liquefied hydrocarbon gases. General requirements for operation
|
Customers Who Viewed This Item Also Viewed:
 |
Industrial process measurement and control equipment. Reliability. General requirements and test methods
Language: English |
Gauged corrosion-resistant, heat-resistant and high-temperature steel shape
Language: English |
System for ensuring the reliability and safety of construction sites. Loads and impacts. design standards
Language: English |
Heating, ventilation and air conditioning. Fire Safety Requirements
Language: English |
Reliability of atomic power stations and their equipment. General statements and reliability index nomenclature
Language: English |
Electromagnetic compatibility of technical equipment. Technical equipment for nuclear power plants. Requirement and test methods
Language: English |
Billets made of corrosion-resistant steels of 12Х18Н9Т, 12Х18Н10Т, 08Х18Н10Т, 10Х17Н13М2Т, 12Х18Н12Т and 03Х21Н32М3Б types.
Language: English |
Dependability in technics. Terms and definitions
Language: English |
System of products development and launching into manufacture. Technical assignment. Requirements to contents and form of presentation
Language: English |
Reliability in technology. Composition and general rules for setting reliability requirements
Language: English |
Rails of types P38 and P42. Technical conditions
Language: English |
Stainless corrosion resisting, heat-resisting and creep resisting steel and alloy on iron-nickel-based products. Specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
