imgalt

GOST R 52748-2007

ГОСТ Р 52748-2007

Automobile roads of the general use. Standard loads, loading systems and clearance approaches

Дороги автомобильные общего пользования. Нормативные нагрузки, расчетные схемы нагружения и габариты приближения

Status: Effective - Introduced for the first time

The standard applies to the design of construction, reconstruction and overhaul of public roads and establishes for these roads regulatory loads, design load schemes and approximation dimensions. The standard does not apply to the design of temporary highways for various purposes (built for a lifetime of less than 5 years) and auto winter roads.

Стандарт распространяется на проектирование строительства, реконструкции и капитального ремонта автомобильных дорог общего пользования и устанавливает для этих дорог нормативные нагрузки, расчетные схемы нагружения и габариты приближений. Стандарт не распространяется на проектирование временных автомобильных дорог различного назначения (сооружаемые на срок службы менее 5 лет) и автозимников.

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Federal Agency for Technical Regulation and Metrology, 9/24/2007

SKU: RUSS66546

Price: $139.00



imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 93 Civil Engineering »

Evidence base (TR CU, Technical Regulation of the Customs Union) » 014/2011 TR CU. Road safety » Regulations and standards (to TR TS 014/2011) »

ISO classifier » 93 CIVIL CONSTRUCTION » 93.080 Road construction » 93.080.10 Road construction »

National standards » 93 CIVIL CONSTRUCTION » 93.080 Road construction » 93.080.10 Road construction »

National Standards for KGS (State Standards Classification) » Latest edition » T General technical and organizational and methodological standards » T5 Documentation System » T52 Design Documentation System »


The Document References:

Federal Law 184-FZ: About technical regulation

GOST R 1.0-2004: Standardization in the Russian Federation. Basic provisions

GOST R 52398-2005: Classification of automobile roads. General parameters and requirements

The Document is Referenced By:

GOST 22000-2023: Concrete and reinforced concrete pipes. Types and main parameters

GOST R 52751-2007: Steel-fibro-concrete slabs for bridge spans. Specifications

ODM 218.2.006-2010: Recommendations for the calculation of the stability of landslide-prone slopes (slopes) and the determination of landslide pressures on the engineering structures of roads

ODM 218.2.014-2011: Guidelines for the use of steel-fiber-concrete in the repair of bridge structures

ODM 218.2.017-2011: Guidelines Design, construction and operation of roads with low traffic

ODM 218.2.024-2012: Guidelines for assessing the strength of non-rigid pavements

ODM 218.2.027-2012: Guidelines for the calculation and design of reinforced ground retaining walls on highways

ODM 218.2.028-2012: Methodical recommendations on the technical and economic comparison of pavement options

ODM 218.2.038-2014: Guidelines for the overhaul and reconstruction of retaining walls and retaining structures

ODM 218.2.044-2014: Recommendations for the performance of instrument and instrumental measurements in assessing the technical condition of bridge structures on highways

ODM 218.2.049-2015: Recommendations for the design and construction of gabion structures on highways

ODM 218.2.051-2015: Recommendations for the design and design of anti-tailing structures on highways

ODM 218.2.055-2015: Recommendations for the calculation of drainage systems for road structures

ODM 218.2.062-2015: Recommendations for determining the parameters of design loads for modern vehicles

ODM 218.2.063-2015: Recommendations for the use of deep-mixing technology to strengthen the weak soils of the road bed

ODM 218.2.068-2016: Recommendations on accounting for dynamic effects from modern vehicles when calculating the strength, stability and deformability of the road bed

ODM 218.2.069-2016: Recommendations for the design of approaches of the roadbed on a weak base to artificial structures

ODM 218.2.092-2018: Recommendations for the use of sheet piles made of polymer materials in road construction

ODM 218.2.098-2018: Guidelines for the use of a prestressed homogeneous system for strengthening slopes based on a high-strength steel network (more than 1770 N

ODM 218.3.014-2011: Evaluation method for technical condition of bridges and automobile roads.

ODM 218.3.024-2012: Evaluation of the strength of non-rigid pavement

ODM 218.3.030-2013: Method for calculating reinforced cement concrete pavements of roads and airfields on fortified bases

ODM 218.3.042-2014: Recommendations for determining the parameters and assignment of categories of defects in assessing the technical condition of bridges on highways

ODM 218.3.051-2015: Recommendations for determining the stress-strain state of multilayer pavements

ODM 218.3.115-2019: Design and calculation of drainage trays of closed type for roads and airfields

ODM 218.6.002-2010: Guidelines for determining the allowable axle loads of vehicles in the spring period based on the results of diagnostics of public roads of federal significance

ODM 218.6.030-2017: Recommendations for establishing and warranty periods and service life of structural elements of bridge structures

ODM 218.6.034-2019: Recommendations for designing motorway backups on approaches to large cities

Order 2079: List of documents in the field of standardization, the application of which on a voluntary basis to ensure compliance with the requirements of the Federal Law of December 30, 2009 № 384-FZ "Technical Regulations on the Safety of Buildings and Structures

PNST 306-2018: Automobile roads of general use. Organo-mineral cold mixes with addition of recycled asphalt concrete pavement (RAP). Specifications

RMD 32-18-2012 Sankt-Peterburg: Recommendations for the use of paving in the paving of residential and public business areas

RMD 32-18-2016 St. Petersburg: Recommendations for the use of paving in the construction of pavements for residential and public and business buildings

RMD 32-24-2015 Sankt-Peterburg: Design of artificial structures at transport facilities in St. Petersburg

RMD 40-20-2013 Sankt-Peterburg: Designing and installation pipelines for water supply and sewage systems in Saint-Petersburg

RMD 40-20-2016 Sankt-Peterburg: Installation of water supply and drainage networks in St. Petersburg

SDA 24-2008: Rules for assessment (certification) of testing laboratories personnel

SP 243.1326000.2015: Design and construction of low-volume roads

SP 265.1325800.2016: Manifold for engineering networks

SP 288.1325800.2016: Forest roads. Rules of design and construction

SP 313.1325800.2017: Roads in eternal permafrost regions. Rules of design and construction

SP 35.13330.2011: Bridges and pipes. Updated living edition of SNiP 2.05.03-84

SP 37.13330.2012: Industrial transport

SP 396.1325800.2018: Streets and roads of settlements. Urban Planning Rules

SP 431.1325800.2019: Industrial automobile roads. Rules for design and construction in the Arctic zone

SP 66.13330.2011: Designing, building of pressure head networks of water supply and water removal with application of high-strength pipes from pigiron with spherical graphite

SP 99.13330.2016: On-farm roads in the collective and state farms and other agricultural enterprises and organizations

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English
Price: $745.00
imgalt
Unified system for design documentation. Types and sets of design documentation
Language: English
Price: $139.00
imgalt
Loads and impacts
Language: English
Price: $306.00
imgalt
High strength rolled steel. General specification
Language: English
Price: $289.00
imgalt
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English
Price: $349.00
imgalt
Articulated connector devices with cast male and female parts for freight cars of articulated type. General technical specifications
Language: English
Price: $333.00
imgalt
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English
Price: $414.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!